QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

 2075 QCAD (main)SuggestionLow Draw order bug after insert bit map Closed
100%
Task Description

First post, so please excuse if I missed some forum rules etc...

I insert bit maps and trace over them to create DXF files for laser cutting burnout templates. If the edge of the bit map is coincident with a line I have drawn, it is not possible to select the line for offsetting, trimming etc. This is regardless of the draw order or handle number. It seems to happen most if the edge of the image and line are coincident with the X or Y origin. I also use fairly fat lines to make it easy to see. My default line width is 1mm. Not sure if that affects selection or not, but fatter lines don’t help the issue at hand.

Steps to reproduce...
insert bitmap at 0,0
draw horizontal and vertical lines starting at 0,0. (my lines are usually longer than the edges of the bitmap.
try to select one of the lines for offsetting. (Select the line in the area of the bitmap. There is no problem selecting the line where it extends past the edge of the bitmap.)

It does not matter if I insert the bitmap first and then draw lines, or draw lines first, insert bitmap and then change the draw order so the lines are on top. It is also not consistent on which axis is affected. It is usually both X & Y, but sometimes just one or the other.

Workaround is select the bitmap, then move it by 0.001 in any direction. Now the edges are no longer coincident and you can select your lines. The alternate workaround is to insert the image on another layer and then turn that layer off when you need to select a line on the edge of the bitmap.

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

 1324 QCAD/CAMSuggestionVery Low Confusing Copy / Move option Closed
100%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

2140QCAD (main)SuggestionLowChanging navigation mode for mouse wheel doesn't change...Assigned
0%
1 Task Description

Looks like error, but may be that’s feature request.

CAD software uses typical navigation behavior as:
Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.

Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior:
Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.

Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.

QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel.
Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!

Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

2138QCAD (main)SuggestionVery LowBlock zoomstate supersedes Model_Space after Undo of BCAssigned
0%
1 Task Description

Summary: Block zoomstate supersedes Model_Space after Undo of BC

QCAD Professional
Version: 3.25.2.1 (3.25.2.1)
Internet: QCAD.org
Build Date: Oct 15 2020
Revision: 2895712
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown «< (Win installer 32 bit)

With the file provided:
ZW to see the top green ‘revision cloud’ up close
QQ
Box select around the cloud
»> 2 entities in selection
BC, select origin somewhere inside the selection, accept proposed naming
»> ‘Block 1’ is created from the selection
TN
BD, select the newly created Block Reference
»> Auto zoom of ‘Block 1’ (Intended behavior)
OO
»> Returns to Model_Space with the zoomstate of the removed Block
»> Halfway down the drawing
»> The former zoomstate of the Model_Space is lost

Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378

This proves they do, even if the block doesn’t exists anymore.

Regards,
CVH

PS: 3th trial to enter a suggestion ...

2242QCAD (main)SuggestionLowBill of MaterialsAssigned
0%
3 Task Description

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

 1499 QCAD (main)SuggestionLow Add script generator for Qt 5.6.2 Closed
100%
Task Description

As it says on the tin - please add script generator for Qt 5.6.2.

 2156 QCAD (main)SuggestionLow Add an option to XP preferences to include circles or n ...Closed
100%
1 Task Description

Andrew,
unrelated to any OS or version.

Circles do explode to polylines with two arc segments.
Discussed earlier and very correct because a full circle bulge would be a mathematical limit situation.

When there is no option to ‘Undo’ anymore or when the file was saved & loaded there is no easy way back.

One of the reasons why I isolate circle entities if I might going to use XP as in the file here:
https://qcad.org/bugtracker/index.php?do=details&task_id=2155
Even knowing it, I still make more mistakes as I would like. ;-)

It would be nice to be able to exclude circle entities from the GUI explosion action XP.
Can be simply implemented in the top of Explode.explodeSelection with an extra preference in AppPrefs, default =true.

On the other hand, the explosions of circles used internally in various methods should remain.

Regards,
CVH

 1527 QCAD (main)SuggestionLow "Zeichnungseinheit konvertieren" translation missing .. ...Closed
100%
Task Description

... for the Option bar.

 1724 QCAD Community EditionSuggestionLow "OVERKILL" command Closed
100%
Task Description

Is it possible to create “OVERKILL” command like in AUTOCAD

 35 ECMAScriptTaskLow Verify ECMAScript code Closed
100%
Task Description

Verify ECMAScript code with:
http://www.javascriptlint.com/download.htm

 1113 QCAD (main)TaskLow Updating spatialindex? Closed
100%
Task Description

Prompted by d9beb4 - this is actually fixed in current upstream sources (by killing bzero in favor of memset, which is the right thing to do).

It might worth considering to update the spatialindex component.

 2219 ECMAScriptTaskVery Low Update simple_create.js addSimpleText() Closed
100%
1 Task Description

Andrew,

Reading:
https://www.qcad.org/rsforum/viewtopic.php?&t=8286

Can you update addSimpleText() as Text.Width is fixed =100

What is the noTextWidth value?

As far as I can detect ...
PrintPreviewImplPro.prototype.addDecorations uses value 1.
CrankWheel.js uses value 1.
ExText.prototype.beginEvent uses value 2.
ExDrawFonts.prototype.beginEvent uses value 1.
Counter.prototype.getOperation uses QCAD.ini or default zero.
TextAlong.prototype.getTextData usses the width of the textData from the dialog.

Regards,
CVH

2130QCAD (main)TaskLowText: Text dialog removes tabsAssigned
0%
Task Description

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

 132 QCAD (main)TaskLow Snap restrictions Closed
100%
Task Description

Implement snap restrictions

 133 QCAD (main)TaskLow Set relative zero point Closed
100%
Task Description

Set relative zero point tool.

 567 TestsTaskLow rose Closed
100%
Task Description

http://www.askweddingdress.net bridesmaid dresses under $200 sensibility. Designers have even strap matte dealing with for worry of slaying the dial even a shimmer of honor. Obsessed with valuables you must no skip! Cartier parrot ornamental enamel watches http://www.askweddingdress.net wedding dresses , colossal dial having a black blue http://www.askweddingdress.net crochet beach dress , mild blue and darkish green, forming adjacent hue examine, the diploma of tiny district sensible will be the reaching contact yellow, http://www.askweddingdress.net cheap short prom dresses the whole display all of a sudden to existence, features a elegance consciousness http://www.askweddingdress.net cheap dress clothes . colours with 5 guidelines: using the union of colour, make-up rolex, http://www.askweddingdress.net formal beach wedding dresses , dim, white, grey and further intermediate colours, hue gradient colour colour cellular place, and so on. http://www.askweddingdress.net/cocktail-dresses.html vintage cocktail dresses , the emulating five colour rule makes it possible for us to match the colour of daily existence gets easy and explicit. tone colour http://www.askweddingdress.net maxi summer dresses http://www.askweddingdress.net discount bridesmaid dresses : with much more than 3 colours far more lively attain

 82 ECMAScriptTaskLow rename some ECMAScript classes Closed
100%
Task Description

New → FileNew
Close → FileClose
...

 1818 DocumentationTaskLow QCAD Reference Manual / Paste along Entity ... Closed
100%
Task Description

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

 83 QCAD (main)TaskLow Part Library - Find Files / Generate Files Closed
100%
Task Description

Create and extend part library.

Find Existing Files

Find files under a suitable license (e.g. creative commons) for inclusion into the QCAD part library:

  • DXF / DWG files
  • SVG files which we could convert to DXF with a command line converter or InkScape if possible.
    • DXF files produced from SVG / with InkScape contain a lot of polylines with small line segments which interpolate arcs and circles.
      • A ‘Convert Interpolating Line Segments’ tool could be used to convert line segments into arcs, ellipse arcs and circles.
        1. for c in 0...number of nodes: create arc with v[c], v[c+1], v[c+2]
        2. check if v[c+i] is also on arc for c+i<number of nodes
        3. if n nodes have been found which are all on arc and all segments have almost the same length and are relatively small compared to the whole drawing, convert them to arc
      • A ‘Simplify Polyline’ tool could be used to remove nodes that don’t add a lot of information (almost straight connected line segments).

Parameterized Items

  • Parameterized items use XDATA to let the script behind know which entities need to be changed in which way.
  • The user can choose from all supported parameters shown in a table.
  • The user can choose from options:
    • Create dimensioning
    • Create auxiliary lines
    • Create center line
    • Scaling
    • Sectional drawing
    • Hatching space
  • Disadvantage compared to automatically generated items:
    • It is not possible to add an item with it’s parameters to favorites, e.g. some specific screw often used in a drawing. To make that possible, the parameters has to be saved, too.

Links

[mostly old] Generate Items Automatically

  • Research possibilities to turn data sheets into library parts, for example attached data sheet.
    • Ideas:
      • use an XML file for data entry, use an ECMAScript to generate symbols based on the XML file.
      • Instead of writing a complete ECMAScript file to generate the geometry, it might be possible to simply draw one item and attach XDATA to the entities for information on how the item can be scaled, stretched, etc.
        • E.g. a line might have the XDATA “transform” with value “translate(length-5, 0)” which would mean that the line has to be moved ‘length-5’ to the right, where ‘length’ is the current value of the ‘length’ parameter in the XML data file. Similarly, there could be functions like “moveEndpoint”, “moveStartpoint” or even “rotate”, “mirror”, etc.
      • XML file could contain all data and refer to a .js file that is used to generate the specific drawing. E.g.:
<!-- XML document defines a name template to use for the generated parts: -->
"DIN_912_M%1_L%2""din_912.js""DXF"
	<!-- Attributes to use for the name template -->
	"d"
	"L"
 
	<!-- For each type of the specific part, we define some parameters that 
		are identical for that type (here M3): -->
	"3""5.5""2.5""3""18"
		<!-- For each of these elements, a DXF file is generated. This DXF file 
			is generated with file name "DIN_912_M3_L22.dxf" and parameters d="3" D="5.5" 
			s="2.5" k="3" b="18" L="22": -->
		"var1"
		"var2"
		"60"
 
 
	"M4""7""3""4""3""20"
		"var1"
 
 
	"var1"
		"22"
		"25"
		"30"
		"35"
		"40"
		"45"
		"50"
 
 
	"var2"
		"70"
 
 
 
 569 TestsTaskLow murphy Closed
100%
Task Description

later on phase http://www.askweddingdress.net bridal evening dresses . five. http://www.askweddingdress.net maternity wedding gowns If you’re currently conscious in the quantity of one’s company who will likely be attending consult about discounted space prices, or other close by appropriate accommodation for them. http://www.askweddingdress.net beach wedding dresses cheap six. http://www.askweddingdress.net informal wedding dresses cheap If a wedding ceremony package deal is getting provided question no matter whether there’s any versatility within the checklist as a way to personalize the occasion to fit your needs or if it’s a mounted deal without any alterations permitted http://www.askweddingdress.net cheap bridesmaid dresses http://www.askweddingdress.net wedding gowns bridesmaid dresses . seven. Inquire concerning the amenities offered in the venue or inside the instant region and for anyone who is preparing to benefit from any of those what fees are concerned and in the event the venue can organize these in your behalf. eight http://www.askweddingdress.net cheap plus size bridesmaid dresses http://www.askweddingdress.net/prom-dresses.html beach brides dresses . Verify the climate ailments for that time of calendar year and time of day in the venue. If you’re preparing an http://www.askweddingdress.net inexpensive bridal dresses

 568 TestsTaskLow Melissa Closed
100%
Task Description

prince to possess a content existence permanently. http://www.askweddingdress.net fuchsia bridesmaid dresses http://www.askweddingdress.net mermaid wedding dresses a bride want a best marriage ceremony dresses for church marriage ceremony, http://www.askweddingdress.net prom evening dresses she need to decide on outside and informal marriage ceremony dresses,Therefore the halter strap neckline seaside wedding ceremony dresses on-line are outstanding option. seaside wedding ceremony dresses cabin and about the refuge a location that gives accommodation quickly for that friends from your nearby men and women obviously will need an individual somewhat some kindness http://www.askweddingdress.net vintage dresses new york http://www.askweddingdress.net cocktail dress cheap , cabin beneath thirty many years outdated and rocks the home of white stone that Warung or stand It’s also utilized, comfortable drinks, beer, fruit juices http://www.askweddingdress.net/cocktail-dresses.html vintage cocktail dresses http://www.askweddingdress.net plus size dresses http://www.askweddingdress.net petite wedding gowns http://www.askweddingdress.net vintage prom dresses . Balangan the tea duration seaside wedding ceremony dresses property, the wedding ceremony few standing within the bed room about eighteen many years previous, desire to expertise remaining inside a villa Rosanzerusujoya

 64 DocumentationTaskLow Manual CSS Closed
100%
Task Description

Create some CSS to display the user manual in a professional way, similar to web site.

 134 QCAD (main)TaskLow Lock relative zero Closed
100%
Task Description

Lock relative zero tool

 135 QCAD (main)TaskLow Lock layers Closed
100%
Task Description

Implement layer locking

 78 QCAD (main)TaskLow Linux deployment: tar.gz Closed
100%
Task Description

if possible, extend create_makeself script to create a tar.gz in addition to the executable installer, so we have both in the end.

 1120 QCAD (main)TaskLow Linetype Dropdown not useable in Linux x86_32 (and all  ...Closed
100%
Task Description

I just installed qcad-3.7.0-pro-linux-x86_32 on my up-to-date debian sid system.
When I choose the “Pen” to be visible in the toolbar, the line type is not useable at all, because the drop-down menu is far too narrow.
After deleting QCAD3.conf the drop-down menu appeared wide after the first startup of QCAD. After the second startup it appeared narrow again.
Got the same result on another 32bit installation, a 64bit installation, all debian sid/kde and the windows version 32bit (only tried with wine).

 227 QCAD (main)TaskLow Library browser as separate tool Closed
100%
Task Description

Split up library browser as separate, QCAD independent tool.

TODO

- Potential interaction with other products / release as separate product?

DONE

- Remove DB dependency from QCAD 3.
- start-up splash screen
- avoid drop in browser widget
- app name
- menu (exit, about, preferences)
- preference dialog
- fix app icon
- window title
- library browser as single app
- raise window to the top on start

Motivation

- Make QCAD 3 more reliable to start.
- Make QCAD 3 faster to start (if library browser not used).
- Reduce memory usage if library browser not open.

Interface with QCAD 3

- Launch Library browser from menu or tool button.

QCAD launches library browser for example as:
./QCAD -autostart scripts/Tools/LibraryBrowser/LibraryBrowser.js

- Insertion of library parts with drag and drop (like so far). No change should be required for this (?).

 1057 TranslationTaskLow Japanese translation missing in a couple spots .... Closed
100%
Task Description

Is the Japanese translation still in progress or is this a update Problem?

 136 QCAD (main)TaskLow Isometric projection Closed
100%
Task Description

Implement isometric projection tool

 347 QCAD (main)TaskLow Investigate QPainter warnings when running QCAD in -no- ...Closed
100%
Task Description

Invastiagte QPainter warnings when running QCAD in -no-gui mode

See forum:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1653&start=45

 1119 QCAD (main)TaskLow Improve presentation of linetype names in combobox Closed
100%
1 Task Description

The Linetype Names in the pull-down menu for Layer are hardly readable - it seams to me that the description is used twice (in different ways) in each row.
Till 3.6.4 the Information was short and clear.

 1507 QCAD (main)TaskLow Improve arc rendering for screen-based linetypes Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566

 129 QCAD (main)TaskLow Image entity Closed
100%
Task Description

Implement RImageEntity and related classes.

DONE

Image in block

Image insertion tool:

  • change size in options tool bar: keep ratio

Image file look up:

  • absolute path
  • relative path (?)
  • same path as drawing file

Image display:

  • draft: border
  • normal: image
  • preview: border (or image for small file)

Move, rotate, ...

POSTPONED

Selection with click inside image

Move reference points to scale

 570 TestsTaskLow gary Closed
100%
Task Description

look at, http://www.askweddingdress.net tea length wedding dresses don’t blindly look for huge http://www.askweddingdress.net plus sizes cocktail dresses http://www.askweddingdress.net/evening-dresses.html long sleeve wedding gowns , and can harm the all round perception of stability http://www.askweddingdress.net formal wedding dresses cheap , http://www.askweddingdress.net classic summer dresses just the reverse http://www.askweddingdress.net flower girl dresses . For a few complicated patek philippe watches attributes the excellent embodies the knowledge with the human hand, but when a view you should dial to make exaggerated capacity to invest plenty of eyes appear obvious and distinct around the time, http://www.askweddingdress.net large size bridesmaid dresses around the opposite towards the intention in the timing in the look at. And, to get a observe dial is actually a complicated, typically call for a really formal or incredibly daring with clothes to match http://www.askweddingdress.net mother of the bride dresses , so if you are not a lot gold loved ones, http://www.askweddingdress.net informal beach wedding dresses not per day to get a observe for that requirements of the fit or perhaps a easy dial with a lot more Patek philippe observe for every day check out. Getting this superb look at normally indicates you happen to

 572 TestsTaskLow Dylan Closed
100%
Task Description

http://www.askweddingdress.net black dresses http://www.askweddingdress.net discount bridesmaid dresses hour markers arms. Apart from some time indicator, this timepiece also contains a date indicator discovered on three o’clock. This look at can also be created to become appropriate for diving with its 300 meters h2o resistance. http://www.askweddingdress.net informal beach wedding dresses Although it could absence a chronograph http://www.askweddingdress.net orange bridal dresses , this really is nonetheless definitely an incredible view to get underwater http://www.askweddingdress.net/evening-dresses.html vintage gowns dress . You’ll be able to get this Longines Hydro Conquest for an approximate cost of $1 http://www.askweddingdress.net cheap dresses under http://www.askweddingdress.net formal wedding dresses cheap ,a hundred and fifty.Longines Women Diamond ConquestThe new Longines Girls Diamond Conquest quartz observe helps make the sporty timekeeper a bit little bit additional female in design, whilst preserving the robustness on the unique, nondecorated see.Developing this edition with the look at, Longines employed the timeproven recipe: to create a dressier edition of the sporty view, just just take an current design and adorn it with diamonds.As an icing within the cake, the http://www.askweddingdress.net cheap long evening dresses http://www.askweddingdress.net plus evening dresses

 573 TestsTaskLow Devin Closed
100%
Task Description

conducive to host presentations and video clip http://www.askweddingdress.net plus size beach wedding dresses , photography shooting , http://www.askweddingdress.net plus size dresses leaving a lovely second. additional affordable wedding ceremony dresses on 1luckybride 1 reader asks: What exactly are all of the legal actions and the way do you go about receiving your title altered? Is there an inventory of other things which has to alter, http://www.askweddingdress.net bridal gown dresses like your financial institution accounts, http://www.askweddingdress.net short brides dresses charge cards, insurance coverage, and so on http://www.askweddingdress.net brides mothers dresses http://www.askweddingdress.net bridal bridesmaid dresses .? I used to be gonna start into the best way to go about this when I recognized we’ve an intensive post on “How To Alter Your Surname Whenever you Get Married”on our weddings web page http://www.askweddingdress.net muslim wedding dresses . Study it it is useful! 1 factor to become conscious of, specifically in case your honeymoon is not using location appropriate following the marriage ceremony: http://www.askweddingdress.net vintage short dresses Ensure your identify lines up on all of the paperwork necessary to journey. As an example, your driver’s license http://www.askweddingdress.net/evening-dresses.html vintage gowns dress

 928 QCAD (main)TaskLow CXF font editing Closed
100%
1 Task Description

Port CXF font editor to QCAD 3.
- Load CXF fonts (load glyphs into blocks)
- Save back to CXF format

 114 QCAD (main)TaskLow Create QCAD Cheat Sheet Closed
100%
Task Description

Cheat Sheet which lists all QCAD tools with icon, key code and explanation

Possibly two versions for Windows / Linux and Mac

 131 QCAD (main)TaskLow Create block Closed
100%
Task Description

Create block from selection

 571 TestsTaskLow Blake Closed
100%
Task Description

industry for any marriage ceremony band that will stand the check of time http://www.askweddingdress.net beach prom dresses , or perhaps a bit of style jewellery that may create a long lasting impression, http://www.askweddingdress.net cocktail dress plus size the topic of tungsten carbide rings swiftly will come up http://www.askweddingdress.net short beach dresses http://www.askweddingdress.net inexpensive summer dresses . http://www.askweddingdress.net chian beach dresses Tungsten carbide marriage ceremony rings have develop into additional and additional preferred for a lot of reputable causes; http://www.askweddingdress.net/flower-girl-dresses.html white flower girl dresses nonetheless, just like all factors in existence they might not be for absolutely everyone http://www.askweddingdress.net mini wedding gowns . These guidlelines concerning the advantages and disadvantages of tungsten rings really should enable you to to ascertain if a wonderful tungsten marriage ceremony band will be the great match for you personally, or in case you may well uncover a greater match having a much more classic piece http://www.askweddingdress.net white bridesmaid dresses . http://www.askweddingdress.net cheap dresses The primary factor to understand about tungsten rings is the fact that in addition to

 80 DocumentationTaskLow API Doc Organization Closed
100%
Task Description

Rename everything from “RSFramework” to “QCAD Application Framework” (qcad_application_framework.pro / dox / doxyfile ...).

Add header with copyright / link to homepage.

Structure of documentation:

  • Entry (main) page
    • API (links to API doc for modules):
      • math
      • core
      • gui
      • ...
    • ECMAScript Developers (links to intros and examples):
      • ECMAScript introduction
      • ECMAScript module
Showing tasks 2251 - 2300 of 2301 Page 46 of 47<<First - 43 - 44 - 45 - 46 - 47 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing