|
4 | Book | Bug Report | Medium | Book "CAD Instruction" layout issues | Closed | |
1 |
Task Description
Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.
|
|
10 | Book | Bug Report | Low | Book numbering in PDF is incorrect | Closed | |
|
Task Description
The numbers in the book don’t match with the bookmarks numbers in the PDF as shown in Acrobat Reader.
|
|
886 | Book | Bug Report | Low | Wrong coordinates in the Orthographic Projections hands ... | Closed | |
|
Task Description
I have the book dating about a year back, with the following metadata (no other version information in there):
Producer: FPDF 1.7
CreationDate: Fri Aug 24 15:10:36 2012
I believe there is a slight error in the Orthographic Projections hands-on (it may not be there in current versions of the book, but since my download timeframe is long over, I can not check that – should that be the case, sorry for the noise).
On page 219, step 1 of the exercise (drawing the front view), it is said
Set the first corner of the rectangle at the origin of the drawing (1)
and the other corner at 30,20 (2).
On pages 225-226, steps 7 and 8, drawing a 45-degree auxiliary line for the right-side view, it is said
Set the position of the line at the origin of the drawing (coordinate 0/0).
0/0 is the “bottom left” corner of the top view. The correct coordinates for the auxiliary line’s position are 0/30, the “bottom left” corner of the front view.
(I had not realized the bug tracker had a Book category as well – hence this is a duplicate of an e-mail report I have sent to info@.)
|
|
888 | Book | Bug Report | Low | Wrong pictures in hands-on | Closed | |
|
Task Description
In the “Drawing a Shape Using Absolute Polar Coordinates” hands-on, step 3, there are two toolbar pictures, each with a caption. The pictures don’t match the captions; ie. the pictures should be swapped.
|
|
2117 | Command line tools | Bug Report | Low | BBOX inconsistent output | Closed | |
1 |
Task Description
When I run bbox with the attached file I get inconsistent results if I run it 6 or 10 times.
Sometimes the size is 448979.2349223149/310815.2964427199 (it thinks that there is an object at 0,0) sometimes it is 338.0789223148604/302.31644271989353 (this is what I think is correct)
ubuntu@server-a:/opt/qcad-3.25.2-pro-linux-x86_64$ ./bbox test.dwg QCAD version 3.25.2 Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” 15:59:40: Debug: calling odInitialize 15:59:42: Debug: dropped global XDATA (no res buf): “ViewportCenter” Min: 0/0 Max: 448979.2349223149/310815.2964427199 Size: 448979.2349223149/310815.2964427199
ubuntu@server-a:/opt/qcad-3.25.2-pro-linux-x86_64$ ./bbox test.dwg QCAD version 3.25.2 Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” 15:59:49: Debug: calling odInitialize 15:59:51: Debug: dropped global XDATA (no res buf): “ViewportCenter” Min: 448641.156/310512.98 Max: 448979.2349223149/310815.2964427199 Size: 338.0789223148604/302.31644271989353
|
|
2193 | Command line tools | Bug Report | Very Low | dwg2csv retains the last encountered custom properties | Closed | |
|
Task Description
QCAD Professional Win installer 32 bit Version: 3.25.2.13 (3.25.2.13) Internet: QCAD.org Build Date: Feb 12 2021 Revision: cad2d36 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Andrew, While enhancing DrawFromCSV: Forum Link. I had a peek at the new command line tool: dwg2csv
I would never come up with 115 columns. That wouldn’t be efficient to generate entities from. Although this way it is very complete and one could use specific lists to filter. One downside is that the ‘-list’ switch return is far too vast for the windows command line.
Remarked that: Only the first alphabetically custom property is listed under: QCAD:Line & QCAD:Reference (columns 114-115). And that the last encountered is persistent for all entities that follows.
Maybe this originates from a multiple entity selection ... ... what also retains the last encountered custom properties in the property editor. Should I add a seperate task for that?
Also had an exception thrown: Debug: dropped global XDATA (no res buf): “ViewportCenter”. Discarted that as this very basic test drawing hasn’t even a Viewport.
Regards, CVH
Added: Snippet from DrawFromCSV code (merely a test case)
CSVcomma/semicolon
Offset;50;50
Point;39,789355;-0,815325;+[Custom;Reference:101];
Point;38,49526;4,014304;+[Custom;Reference:102;Line:56]
The two points, and only those two points, are casted with custom properties QCAD|Reference|101 QCAD|Reference|102 & QCAD|Line|56
Added: The dxf file Added: The csv file (change to the comma/semicolon style)
|
|
2486 | Command line tools | Bug Report | Low | dwgnest: part multiplicator switch (-u) has no effect | Closed | |
|
Task Description
-u / -multiplier switch has no effect (option applied to later during initialization of nester).
|
|
61 | Documentation | Bug Report | Medium | QCAD 3 Manual | Closed | |
|
Task Description
Change the user manual directory / file names from ‘simpletextviewer’ to ‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown in the help menu.
We can simply drop the contents of the manual that is checked in and replace it with a simple note “No manual is available yet for this technology preview of QCAD 3”
|
|
642 | Documentation | Bug Report | Low | Better explanaton for Layer '0' | Closed | |
|
Task Description
Layer ‘0’ has some special function. E.g. it can not be deleted, it will contain the data of undeleted layers.
I recommend adding some explanations: Explain the function of Layer ‘0’ as third paragraph in chapter 12 of the manual. Further it should be recommended to never use this layer for drawing.
By the way: I consider this to be better than no layer undelete. BUT: is there really not way for a true layer undelete...
|
|
1004 | Documentation | Bug Report | Low | QCAD e-book not searchable in Preview, Acrobat | Closed | |
|
Task Description
I just downloaded QCAD and bought the doc that goes with it. Lo and behold, I find that I cannot search the doc in Preview (Acrorbat Reader too!)! So I paid extra for doc that might be argued should come with a product (although its hard to complain about the price) and then I cannot even search it electronically? There is just everything wrong with that in the year 2014! Please fix as it is extremely inefficient and time consuming to not have electronic search capability.
|
|
1040 | Documentation | Bug Report | Low | Break out Manual on Circle/Ellipse does not respect Rem ... | Closed | |
|
Task Description
3.4.7 trial as well as community Git 9d3979
Expected:
Actual:
Same for an ellipse.
I can see that by selecting two points on a closed circular shape it’s nigh impossible to tell which segment the user actually wants to remove :)
The documentation doesn’t mention this corner case. For clarity, a note detailing this effect a bit should be added to the docs.
On a slightly related note, I do not see why the feature couldn’t work on Polyline objects as well (with the same corner case restriction if it’s a closed polyline).
Very useful feature btw, thanks for it.
|
|
1086 | Documentation | Bug Report | Low | Spline corner control responding to multiple mouse clic ... | Closed | |
|
Task Description
I can’t find any documentation (Reference Manual / Book) about the possibility to change the “corner” transition shape for Spline’s (Control Points) with multiple mouse clicks. 1, 2 or 3 clicks = smooth to sharp corner.
|
|
1889 | Documentation | Bug Report | Low | Autosave fails for QCAD original cxf font location | Closed | |
|
Task Description
Now I try the third time to post this .... .... deleted by “wrong token”??????? However ...
Regarding to the online tutorial:
quote: Opening a CXF Font for Editing
To load an existing CXF font file in QCAD to view and edit its glyphs, simply use the menu File > Open and choose the format filter “CXF Font Files (*.cxf)”. Then choose the font file you want to open. The fonts that come with QCAD are stored in directory “fonts” of your QCAD installation.
quote end
Editing the cxf font in the original QCAD font folder will lead to a error message triggered by the Autosave function:
File access error: “C:/Program Files/qcad-3.22.1-pro-win64/fonts\~~Husky_test_font.dxf”. Access is denied. [15:34:58] Autosave failed: C:\Program Files\qcad-3.22.1-pro-win64\fonts\~Husky_test_font.dxf
Note: Windows will not save anything in a system folder and the process is terminated by windows.
Solution: Move the cxf font for editing from the QCAD folder to a unprotected folder like Documents/drawings. After editing is done move it back to the QCAD font folder.
|
|
2324 | dwg2csv | Bug Report | Low | dwg2csv: exception when listing properties (-l) | Closed | |
|
Task Description
dwg2csv -l
Exception when trying to list properties for RDwgStyle
|
|
2419 | dwg2csv | Bug Report | Low | dwg2csv quote handling | Closed | |
1 |
Task Description
When a text string contains a double quote(”) character, the value is not quoted. If the text string contains a comma, the value is quoted (using double quotes).
When a text string starts with a double quote, it is unclear which of the above two states is correct, making for difficult parsing. (Excel seems to assume the second state when possible)
It would make parsing much easier if the output csv followed the format provided in rfc4180, namely that
If fields are not enclosed with double quotes, then double quotes may not appear inside the fields (2.5)
If double-quotes are used to enclose fields, then a double-quote appearing inside a field must be escaped by preceding it with another double quote (2.7)
|
|
1908 | dwg2maptiles | Bug Report | Low | dwg2maptiles: Transparent background not cleared | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6389
|
|
1221 | dwg2pdf | Bug Report | Low | dwg2pdf: Cannot create a QWidget | Closed | |
|
Task Description
dwg2pdf shows error under Windows systems: Fatal: QWidget: Cannot create a QWidget when no GUI is being used
|
|
1675 | dwg2pdf | Bug Report | Low | draw order incorrect using dwg2pdf to convert DXF to PD ... | Closed | |
|
Task Description
explicit drawing order of objects (such as sending hatch to back and bringing text to front) not respected when export to pdf used, the order of overlapping objects seems to use the order in which they were added to the drawing
this causes problems if we try to export a dxf to pdf and the hatching was drawn after some of the text
observed in Mac OSX El Capitan and Linux
|
|
1712 | dwg2pdf | Bug Report | Low | dwg2pdf: auto fit fails for blocks | Closed | |
|
Task Description
Autofit (-a) has no effect when converting a block or layout block (other than Model_Space).
|
|
1952 | dwg2pdf | Bug Report | Low | Drawing problem for the object in pdf which converted b ... | Closed | |
|
Task Description
The original file is A5.dwg. I’m using QCAD professional 3.23.0. A5.pdf is converted by command line tool dwg2pdf. I found the drawing problem in it. See the attachment file problem.png.
As you see, I write down 3 bugs in problem.png.
1. bug 1. The position of ‘green 90’ is wrong. 2. bug 2. The line width is too large. You can see dot in A5.dwg, but a line in A5.pdf. 3. bug 3. The ‘green 42’ is missing.
Thank you very much for your help!
|
|
1953 | dwg2pdf | Bug Report | High | Too small to see any drawings in pdf which converted by ... | Closed | |
|
Task Description
Hello, I found a bug.
See the problem2.png.
Original file: 004.dwg. After converting pdf by dwg2pdf. The file is 004.pdf. I can’t find any drawings. I scale the pdf reader to 6400%. But the drawings are still too small.
This is my using command: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 path
|
|
1955 | dwg2pdf | Bug Report | Low | Encoding or font error | Closed | |
|
Task Description
Morning, I found a bug. Andrew, Thank you very much.
Original file: 跨海大桥.dwg
Converted file: 跨海大桥.pdf
Bug Description file: problem3.png
As you see, all the Chinese fonts are drawed as ???
|
|
1956 | dwg2pdf | Bug Report | Low | Missing some drawing elements after being converted by ... | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug Description file: problem4.png
As you see, there are too many drawings missing.
|
|
1957 | dwg2pdf | Bug Report | Low | Missing some drawing elements after being converted by ... | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug Description file: problem4.png
As you see, there are too many drawings missing.
|
|
1958 | dwg2pdf | Bug Report | Low | Draw rectangle as ellipse | Closed | |
|
Task Description
Good afternoon, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug description file: problem5.png
As you see, all the rectangle fills are drawed as ellipse.
|
|
1960 | dwg2pdf | Bug Report | Low | dwg2pdf command fail | Closed | |
|
Task Description
Good afternoon, I found a bug.
Source file: B5.dwg.
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -font-substitution Standard GBK path
After I used the command, the message “Warning: standard font not found” occured. And B5.pdf is not found. Convert is fail.
|
|
1961 | dwg2pdf | Bug Report | Low | Too many drawings are missing | Closed | |
|
Task Description
Hello, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -block=布局1 path
Bug description file: problem8.png
As you see. I use dwg2pdf to export the block named “布局1”. There are too many drawings missing.
|
|
1964 | dwg2pdf | Bug Report | Low | The width of line is wrong | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 南博湾3-702户型.dwg
Converted file: 南博湾3-702户型.pdf
Bug description file: problem9.png
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 path
As you see, the width of lines are wrong. Please follow the red arrow in problem9.png.
|
|
1965 | dwg2pdf | Bug Report | Low | More than one problems in it | Closed | |
|
Task Description
Original file: Connected King Room.dwg
Converted file: Connected King Room.pdf
Bug description file: problem10.png
As you see, there are 2 bugs:
1. There are 4 tabs in the original file. But dwg2pdf can only convert one tab to pdf. 2. After converting, the right column drawing is missing.
|
|
2542 | dwg2pdf | Bug Report | Low | dwg2pdf: lineweight is scaled with drawing scale, shoul ... | Closed | |
|
Task Description
When using PDF Export I see different lineweight to using dwg2pdf. See Different lineweights PDF Export vs dwg2pdf
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|
|
1139 | dxflib | Bug Report | Low | dxflib: leading / trailing spaces are removed from text | Closed | |
1 |
Task Description
dxflib strips leading / trailing spaces from text when importing DXF files.
|
|
1180 | dxflib | Bug Report | Low | dxflib cannot open files with international characters ... | Closed | |
4 |
Task Description
With dxflib, QCAD cannot open any file with Chinese file name or path name, it popups a “Important Error” dialog. But the writing (”Save As” command) with Chinese file name or path name is of no problem. Does it mean dxflib can only handle single byte characters file name/path name? WinXP, QCAD 3.8.0
|
|
1203 | dxflib | Bug Report | Low | Images not saved (dxflib) | Assigned | |
|
Task Description
I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.
The layer contains a point and the image and nothing else.
The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.
With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:
@@ -158699,28 +153057,6 @@ AcDbXrecord
90
6
0
-IMAGEDEF
- 5
-A1
-100
-AcDbRasterImageDef
- 90
-0
- 1
-/critter/HTV10/Ortofoto/ortofoto201502f.png
- 10
-210.0
- 20
-149.0
- 11
-1.0
- 21
-1.0
-280
-1
-281
-0
- 0
ENDSEC
0
EOF
The point in the same layer does not similarly disappear, the bug only seems to affect images.
I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).
I have not been able to correlate the bug with anything.
Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.
(Any chance of getting FreeBSD into the “Operating System” field ?)
|
|
1246 | dxflib | Bug Report | Low | Saving MText with linefeeds in escaped text causes corr ... | Closed | |
|
Task Description
Saving MText with linefeeds in escaped text causes corruption of file.
See: http://www.qcad.org/rsforum/viewtopic.php?f=76&t=3593
|
|
1290 | dxflib | Bug Report | Low | test code does misspell all api functions containing th ... | Closed | |
|
Task Description
All such functions in the api seem to be use the spelling Linetype (with lower-case t) while every function call in the test code does use LineType instead.
Report is for version 3.7.5 as it was the only version I found to download on the qcad.org webpage. Sourceforge also didn’t seem to have any downloads and while I found a few dxflib clones on GitHub, none seemed official or up-to-date. But maybe I’m just blind
|
|
1294 | dxflib | Bug Report | Medium | Hatches scale differently now from earlier releases | Closed | |
|
Task Description
Something with hatching changed between 3.10 and 3.12; Changelog for 3.11.2 states: “Add support for hatch patterns defined per entity”. That may be?
Attached drawing from an older version; open in current and see a black box where there should be earth. Change scaling of hatch from 10 to 254 and it will be exactly the same it was when saving the file.
Curiously, that is like swapping inches and mm? Looking into prefs, there is a new drop down: “Messsytem für Linien und Schraffuren” and it read “imperial”; making it metric and bingo, my drawing looks as intended!
This is bad, because each drawing has to be changed! I changed the application default drawing setting to metric and the existing drawing still had imperial set…
Probably a heuristic was on order? If the drawing does not specify the new setting, and the drawing units is metric, use metric?
|
|
1314 | dxflib | Bug Report | Very Low | DL_Attributes::isInPaperSpace should be const | Closed | |
|
Task Description
Only getter that’s missing it in dl_attributes.h
|
|
1321 | dxflib | Bug Report | Low | dxflib: Handles not parsed correctly | Closed | |
|
Task Description
I did noticed a bug in the lib: Indeed, the handle numbers that DL_Dxf is parsing are in most case incorrect. I believe this is due to the way then handle number is parsed in DL_Dxf::processDXFGroups. The handle is parsed by calling the function getIntValue, which itself calls the function toInt to convert the handle from std::string to int by calling the function std::strtol(handle, NULL, 10). However, the handle numbers in a dxf file are stored as hexadecimal. I wrote a quick and easy fix to this issue, just tell me if you are interested!
|
|
1485 | dxflib | Bug Report | Low | dxflib: Lines are on the wrong layer when processing dx ... | Closed | |
|
Task Description
I create a drawing using QCAD which is stored using dxflib. For some reasons dxflib must be used. This drawing contains arcs and lines on a separate layer. If the dxf file is processed by an other tool only the arcs are referenced to the specific layer. The lines are referenced to the standard layer 0. It doesn’t matter if I’m using the community edition or the pro edition.
After a some investigations I found that the created dxf file is not correct. I manually corrected the dxf file and it works as it should.
For details please refer to the appended files. Take a look to the ENTITY section and the LINE entities, e.g. line 2370. It is just to swap two entities.
Thanks for support.
|
|
1595 | dxflib | Bug Report | Low | LWPOLYLINE exports Z values for vertices | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=22&t=4925
https://www.autodesk.com/techpubs/autocad/acad2000/dxf/lwpolyline_dxf_06.htm
|
|
1631 | dxflib | Bug Report | Low | dxflib: wrong definition of DL_POLYLINE3D flag | Closed | |
|
Task Description
DL_POLYLINE3D should be 0×8.
|
|
1732 | dxflib | Bug Report | Low | Saving dimension with custom text position | Closed | |
|
Task Description
Custom text position must be written as type flag (code 70, flag 128) as well as in style overrides as codes
1070
279
1070
2
|
|
2461 | dxflib | Bug Report | Very Low | ASCII Control characters not handled correctly in Commu... | Assigned | |
|
Task Description
I see the following problem: When I open a particular DXF file in the Professional Trial version 3.27.9.0 on macOS, “^I” in text fields is expanded to whitespace. When I open the same DXF file in the Community Edition 3.27.9.0 on NetBSD/x86_64 (installed from pkgsrc), “^I” in text fields is visible as “^I”.
|
|
17 | ECMAScript | Bug Report | Low | RLineEntityPointer doesn't work as function argument of ... | Closed | |
|
Task Description
Script code (SvgExporter.js):
245 // only export entities on main block "*Model_Space":
246 if (realEntity.getBlockId() == this.doc.getBlockId("*Model_Space")) {
247 RFileExporterAdapter.prototype.exportEntity.call(this, entity, false);
248 }
Script debugger exception:
Uncaught exception at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246:
Error: :-1:-1: RExporter: Argument 0 is not of type REntity*.
<native>(RLineEntityPointer(0xb6fb158), false) at -1
<anonymous>(entity = RLineEntityPointer(0xb6fb158), preview = false) at
/home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246
<anonymous>() at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:211
Workaround: Used exportEntity() with ID as argument instead. However there may be other cases where no alternative method is available.
RFileExporterAdapter.prototype.exportEntity.call(this, realEntity.getId());
|
|
32 | ECMAScript | Bug Report | High | REcmaDocument.h: queryIntersectedEntitiesXY() is missin ... | Closed | |
|
Task Description
context:
'doc.queryIntersectedEntitiesXY'
RDocument.h:
QSet<REntity::Id> queryContainedEntities(
const RBox& box
);
QSet<REntity::Id> queryIntersectedEntitiesXY(
const RBox& box,
bool checkBoundingBoxOnly=false,
RBlock::Id blockId = RBlock::INVALID_ID,
const QList<RS::EntityType>& filter = QList<RS::EntityType>()
);
QSet<REntity::Id> queryContainedEntitiesXY(
const RBox& box
);
REcmaDocument.h:
static QScriptValue
queryContainedEntities(QScriptContext* context, QScriptEngine* engine);
static QScriptValue
queryContainedEntitiesXY(QScriptContext* context, QScriptEngine* engine);
static QScriptValue
|
|
149 | ECMAScript | Bug Report | Low | SIGABRT when trying to use entiy.setColor() | Closed | |
|
Task Description
Script context: Compare.js#413:
"green"
ECMA code:
QScriptValue
REcmaSharedPointerEntity::setColor
(QScriptContext* context, QScriptEngine* engine)
{
QScriptValue result = engine->undefinedValue();
// public function: can be called from ECMA wrapper of ECMA shell:
REntity* self =
getSelf("setColor", context);
=> Q_ASSERT(self!=NULL);
Stacktrace:
Thread [1] 18673 (Suspended : Signal : SIGABRT:Aborted)
__kernel_vsyscall() at 0xffffe424
raise() at 0xb4efc8df
abort() at 0xb4efe220
RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8f3917a
qt_message_output() at 0xb5356f65
0xb53571ab
qFatal() at 0xb53572c9
qt_assert() at 0xb5357355
REcmaSharedPointerEntity::setColor() at REcmaSharedPointerEntity.cpp:1,360 0x8bc0602
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa622afd2
0xb6a423e3
0xb6af06e0
0xb6ac201e
0xb6be0cd3
0xb6be11a9
QMetaObject::metacall() at 0xb5478c83
QMetaObject::activate() at 0xb5489134
<...more frames...>
|
|
160 | ECMAScript | Bug Report | Medium | SplitIntoEqualParts.js: Uncaught exception | Closed | |
|
Task Description
Uncaught exception at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174: Error: :-1:-1: REntity: Argument 0 is not of type REntity *REntity *.
<native>(RLineEntityPointer(0xb73b4c8)) at -1
<anonymous>(op = RAddObjectsOperation(0xb733790), argLine = RLineEntityPointer(0xb73b4c8)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174
<anonymous>(op = RAddObjectsOperation(0xb733790)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:111
<anonymous>(true) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:95
<anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
<anonymous>() at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:73
<global>() at -1
174 line.copyAttributesFrom(argLine);
qsdb> argLine
RLineEntityPointer(0xb73b4c8)
|
|
357 | ECMAScript | Bug Report | Low | include should raise exception if file not found | Closed | |
|
Task Description
include() should raise exception if file not found.
This is actually the case but does not seem to work properly.
|
|
1163 | ECMAScript | Bug Report | Medium | DoveTail-script crashes QCAD | Closed | |
|
Task Description
Hi!
I just installed QCAD v3.7.5 and it works like a charm.
Then I installed the DoveTail-script (http://www.qcad.org/rsforum/download/file.php?id=623) and after that QCAD won’t start anymore.
This is the output on the command line in Linux:
Debug: RDwgPlugin::init Debug: RDxfPlugin::init Debug: RHelpPlugin::init Debug: RProScriptsPlugin::init Debug: loading patterns from file: “/opt/qcad-3.7.5-pro-linux-x86_64/linetypes/metric/qcadiso.lin” Debug: shape found: “ZIG” Debug: shape found: “BAT” Debug: shape found: “TRACK1” Debug: shape found: “BOX” Debug: shape found: “CIRC1” Debug: shape found: “RIGHT_ARROW” Debug: loading patterns from file: “/opt/qcad-3.7.5-pro-linux-x86_64/linetypes/imperial/qcad.lin” Debug: TIMER: 67 ms - “loading add-ons” Warning: RScriptHandlerEcma::eval: script engine exception: “TypeError: Result of expression ‘action.addToWidget’ [undefined] is not a function.” Warning: “<anonymous>()@/opt/qcad-3.7.5-pro-linux-x86_64/scripts/File/../EAction.js:1180” Warning: At least one uncaught exception: Warning: “<anonymous>()@/opt/qcad-3.7.5-pro-linux-x86_64/scripts/File/../EAction.js:1180” Debug: “<global>() at -1”
Don’t know whether that is a bug in the script or in QCAD, so I am reporting it here.
Christian
|