QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  descSeveritySummaryStatusProgress
 235 QCAD (main)Feature RequestLow Trial version: dockable with links, etc. Closed
100%
Task Description

Trial version: dockable with static web page (links, special offers, ...)

 247 QCAD (main)Feature RequestLow tab names sometimes shortened too much Closed
100%
Task Description

When many tabs are open, the name of contained drawing is not fully shown. One way that some mdi applications do, is to append the name of the active tab to the top window title, which is also useful in other ways. At least a tool tip with the full name of the file on the tab top was nice.

 249 QCAD (main)Feature RequestLow Default Save Format Closed
100%
Task Description

It was nice to specify the default Format for saving files. 2010 is too young for distribution to unknown users, better use 2004 or so...

 255 QCAD (main)Feature RequestLow Trim ellipses Closed
100%
Task Description

Trim ellipses

 256 QCAD (main)Feature RequestLow Break out segments of ellipses Closed
100%
Task Description

Break out segments of ellipses

 262 QCAD (main)Feature RequestLow Perpendicular snap Closed
100%
Task Description

Perpendicular (orthogonal to entity) snap onto closest entity.

 265 QCAD (main)Feature RequestLow Block Attributes Closed
100%
1 Task Description

TODO:

  • Ask user to enter block attribute values when inserting block
  • If attribute definition changes (tag changes), update attributes accordingly (note that other CAD systems don’t do this)
  • Support for multiline attributes
  • Control order of attributes (as shown to user in property editor, when inserting blocks)

DONE:

  • Defining new block attribute definitions (constructing block attribute definition entities)
  • Editing block attribute definitions (property editor)
  • Synchronize attributes based on attribute definitions (position, angle, size, ...)
  • Loading block attribute definitions from DXF / DWG
  • Saving block attribute definitions to DXF / DWG
  • Loading block attributes from DXF / DWG
  • Saving block attributes to DXF / DWG

Related commands: DDATTE, ATTEDIT, ATTDEF

 267 QCAD (main)Feature RequestLow Toggle grid in view tool bar Closed
100%
Task Description

Toggle grid in view tool bar

 268 QCAD (main)Feature RequestLow Define grid origin Closed
100%
Task Description

Define grid origin

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
1 Task Description

Modify - Round - Click polyline - round all corners

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

 297 QCAD (main)Feature RequestLow Support drawing linetype scale factor (LTSCALE) Closed
100%
Task Description

Support drawing linetype scale factor (LTSCALE)

 302 QCAD (main)Feature RequestLow Printer calibration Closed
100%
Task Description

Calibrate printer X/Y ratio and possibly scale to allow accurate printing even on inaccurate printers.

 305 ECMAScriptFeature RequestLow executing script at terminal command prompt Closed
100%
Task Description

Hello. My question is: can I run my script under Linux QCAD using Linux command prompt.
Something like this. Print in terminal: “./qcad myscript.qs” And can the script executing without QCAD GUI? I need to make my drawing by printing specific command in linux command prompt without using GUI. So after script end his work I want to have my drawing at destination directory.

Thank you.

 310 QCAD (main)Feature RequestLow show/hide grid Closed
100%
Task Description

You removed the button to show and hide grid

I cannot find it and when I turn the grid off and on

 313 QCAD (main)Feature RequestLow Isometric grid Closed
100%
Task Description

Switch grid from orthogonal to isometric.

 315 QCAD (main)Feature RequestLow SVG PG export polylines Closed
100%
Task Description

Polylines may consist of lines and arcs. The SVG PG exporter writes them as all straight lines. A better mapping than polyline then was path, as is done with arcs now.

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

 320 QCAD (main)Feature RequestLow CAD Tool Bar: Back button should go back one menu Closed
100%
Task Description

CAD Tool Bar: Back button should go back one menu. Possibly use two buttons, one to go back to the previous tool bar, one to go back to the main tool bar.

 323 ECMAScriptFeature RequestLow Exceptions in headless scripts Closed
100%
Task Description

The capability of running headless, ie. without GUI, is a very welcome addition to QCAD. I suggest one more improvement:

When an exception occurs in a script (running from autostart) and no-gui was opted for on the command line, QCAD should not try to bring up the debugger ever (regardless of any preferences), but print the message of the exception and possibly a backtrace instead.

Otherwise all errors will produce the same message…

 324 ECMAScriptFeature RequestLow SVG export depends on GUI Closed
100%
Task Description

SvgExporter.js uses PrintPreview to parse the scale string, and therefore depends on the qt GUI part. That should not make maintenance harder to call RMath directly there? Results seem to match from a first look.

--- SvgExporter.js~	2011-10-20 14:11:45.527589416 +0200
+++ SvgExporter.js	2011-10-20 14:12:46.277502814 +0200
@@ -1,6 +1,5 @@
 include("scripts/library.js");
 include("scripts/date.js");
-include("scripts/File/PrintPreview/Print.js");
 
 /**
  * File exporter implementation for the SVG format.
@@ -116,7 +115,7 @@
     this.svgUnitAbbr = ret[1];
 
     // scale
-    this.scale = Print.parseScale(this.scaleStr);
+    this.scale = RMath.parseScale(this.scaleStr);
 
     var bb = this.doc.getBoundingBox();
     var size = bb.getSize();
 326 QCAD (main)Feature RequestLow Print preview: auto center / scale Closed
100%
Task Description

Print preview: auto center / scale

 327 QCAD (main)Feature RequestLow Text tool: options tool bar Closed
100%
Task Description

Text tool: options tool bar with text, angle, text height.

 329 QCAD (main)Feature RequestLow PDF Export: from file menu Closed
100%
Task Description

PDF Export: from file menu

 332 QCAD (main)Feature RequestLow Modify - divide should remain active after one use Closed
100%
Task Description

1. When selecting the Scissors function, it deactivates after the cut is done. One can therefore not continuously select lines and cut it at the selected point. Each time the function has to be activated from the start.

 335 QCAD (main)Feature RequestLow Drawing preferences: Change font of dimensions Closed
100%
7 Task Description

Configure font used for dimensions.

 346 QCAD (main)Feature RequestLow Set up fixed grid Closed
100%
Task Description

Set up fixed grid without any auto scaling or adjusting or meta grid at all.

 348 QCAD (main)Feature RequestLow Dimensions: Inch / Architectural: supporess 0 feet Closed
100%
Task Description

Dimensions: Inch / Architectural: supporess 0 feet

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

 358 ECMAScriptFeature RequestLow lfVVCSSMBo Closed
100%
Task Description

Good point. I hadn’t thgouht about it quite that way. :)

 359 QCAD (main)Feature RequestLow Bigger lineweights Closed
100%
Task Description

Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!

Regards

Clive

 366 QCAD (main)Feature RequestLow Draw circles tangent to other entities Closed
100%
2 Task Description

Hi Andrew

It would be useful to have an option in the Circle tools to be able to draw a circle tangent to other entities such as lines/circles etc.

Regards

Clive

 367 QCAD (main)Feature RequestLow Snap "Reference" also for an arc ... Closed
100%
1 Task Description

The Snap “Reference” is perfect working on circles.

I would be nice to have this function also on Arc’s.
There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.

 382 DocumentationFeature RequestLow Library Browser Closed
100%
Task Description

Please explain the possibilities of the “Library Browser” I’m not able to make a new entry (Drawing Sheets)

 384 QCAD (main)Feature RequestLow Menu icons under Mac OS X Closed
100%
Task Description

Make this an option. Default should be no icons since icons are unusual for Mac OS X application menus.

 388 QCAD (main)Feature RequestLow More options for Polygons ... Closed
100%
3 Task Description

Possibility to draw Polygons with a given dimension for across flats (not only corners).

 393 QCAD (main)Feature RequestLow Scrolling with arrow keys Closed
100%
Task Description

Scrolling with arrow keys

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

 397 QCAD (main)Feature RequestLow ISO project: circles and arcs as ellipses Closed
100%
Task Description

ISO project: circles and arcs as ellipses

 398 QCAD (main)Feature RequestLow status bar: avoid scientific display Closed
100%
Task Description

status bar: avoid scientific display of large float numbers

see also:
http://ribbonsoft.com/rsforum/viewtopic.php?t=1717

 404 QCAD (main)Feature RequestLow New Program Icon Closed
100%
Task Description

Pretty icon for Gnome 3 desktop favorite.. Kind of subjective :)

 408 QCAD (main)Feature RequestLow Script Macro recorder Closed
100%
3 Task Description

Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.

 417 QCAD (main)Feature RequestLow Autosave Dateinamen Nummer ersetzten mit Datum. Closed
100%
Task Description

Wenn ich das Autosave System richtig verstanden habe funktioniert es so:

Nach Ablauf der eingestellten Zeit wird eine Datei mit Nummer im angegebenen Zielordner abgelegt.
Diese Nummer ist weder fortlaufend noch sicher auf- oder absteigend - also keinerlei Hinweis im Dateinamen für den Anwender welches nun die letzte Sicherung ist.
Ziel scheint zu sein das man eine Sicherung pro Tag hat, richtig?

Allerdings ist die Anzahl der Sicherungen pro Tag abhängig von der Anzahl der neu gestarteten QCAD Sitzungen. Starte ich das Programm einmal für den ganzen Tag habe ich eine einzige Sicherung von jeder bearbeiteten Zeichnung. Sicherungen haben dann die selbe Nummer und werden deshalb jeweils überschrieben.

Starte ich das Programm 10 mal pro Tag habe ich 10 Sicherungen (vorausgesetzt ich bearbeite die selbe Zeichnung in jeder Sitzung) mit unterschiedlichen und nicht in Reihe laufenden Nummern. Sicherungen können somit nicht überschrieben werden und am ende des Tages könnten leicht zig wenn nicht hunderte Sicherungen gespeichert sein.

Würde nun diese Nummer im Dateinamen ersetzt mit dem aktuellen Datum habe ich eine Sicherung pro Tag unabhängig wie oft ich QCAD an diesem Tag gestartet habe. Zudem kann der Anwender gleich den Sicherungstag im Dateinamen erkennen und muss sich nicht durch die “geändert am” Info sekundengenau kämpfen.

Macht das Sinn?

 425 QCAD (main)Feature RequestLow Custom properties Closed
100%
1 Task Description

Assigning custom properties to entities and possibly layers and other objects.

 426 QCAD (main)Feature RequestLow Scriptable entities Closed
100%
Task Description

Provide script functionality for entities:

  • Paint or decorate entity, for example based on custom properties assigned to the entity
  • Listen and react to events
 431 QCAD (main)Feature RequestLow Construction lines Closed
100%
4 Task Description

Construction lines (’infinite’ lines).

 437 QCAD (main)Feature RequestLow trim 2 ends Closed
100%
Task Description

Selecting two enteties as borders for the entety to trim on both ends.

 448 QCAD (main)Feature RequestLow Put the asterisk in tab title of modied files in front  ...Closed
100%
Task Description

Put the asterisk in tab title of modified files in front of the name, so it can be seen, when there are so many tabs, that the names will be truncated.

 454 QCAD (main)Feature RequestLow combined move/rotate/scale with two reference points Closed
100%
Task Description

It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.

Showing tasks 151 - 200 of 1976 Page 4 of 40<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing