|
277 | QCAD (main) | Feature Request | Low | command line arguments: allow class name after -exec | Assigned | |
|
Task Description
command line arguments: allow class name after -exec
|
|
287 | QCAD (main) | Feature Request | Very Low | tool bar icon size | Closed | |
|
Task Description
It would be nice if one could not only change the icon size of the widget panel but also the icon size of the tool bars.
|
|
292 | QCAD (main) | Feature Request | Very Low | Choose number of copies when using 'snap with distance ... | Closed | |
|
Task Description
Choose number of copies when using ‘snap with distance to end’.
This might make sense for certain tools only.
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1643
|
|
293 | QCAD (main) | Feature Request | Low | multi-select for blocks | Assigned | |
|
Task Description
It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.
|
|
297 | QCAD (main) | Feature Request | Low | Support drawing linetype scale factor (LTSCALE) | Closed | |
|
Task Description
Support drawing linetype scale factor (LTSCALE)
|
|
302 | QCAD (main) | Feature Request | Low | Printer calibration | Closed | |
|
Task Description
Calibrate printer X/Y ratio and possibly scale to allow accurate printing even on inaccurate printers.
|
|
304 | QCAD (main) | Feature Request | Medium | invalid hatch area hint | Closed | |
|
Task Description
Trying to build a hatch area sometimes results in “invalid hatch area”. It would be nice if QCAD could give a hint why / where the problem occurs (where is “line too long” or “not closed”).
|
|
310 | QCAD (main) | Feature Request | Low | show/hide grid | Closed | |
|
Task Description
You removed the button to show and hide grid
I cannot find it and when I turn the grid off and on
|
|
313 | QCAD (main) | Feature Request | Low | Isometric grid | Closed | |
|
Task Description
Switch grid from orthogonal to isometric.
|
|
315 | QCAD (main) | Feature Request | Low | SVG PG export polylines | Closed | |
|
Task Description
Polylines may consist of lines and arcs. The SVG PG exporter writes them as all straight lines. A better mapping than polyline then was path, as is done with arcs now.
|
|
316 | QCAD (main) | Feature Request | Low | Blocks list and selected block | Assigned | |
1 |
Task Description
Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?
(Feature request sounds a little harsh, enhancement proposal would seem more apt.)
|
|
320 | QCAD (main) | Feature Request | Low | CAD Tool Bar: Back button should go back one menu | Closed | |
|
Task Description
CAD Tool Bar: Back button should go back one menu. Possibly use two buttons, one to go back to the previous tool bar, one to go back to the main tool bar.
|
|
326 | QCAD (main) | Feature Request | Low | Print preview: auto center / scale | Closed | |
|
Task Description
Print preview: auto center / scale
|
|
327 | QCAD (main) | Feature Request | Low | Text tool: options tool bar | Closed | |
|
Task Description
Text tool: options tool bar with text, angle, text height.
|
|
329 | QCAD (main) | Feature Request | Low | PDF Export: from file menu | Closed | |
|
Task Description
PDF Export: from file menu
|
|
332 | QCAD (main) | Feature Request | Low | Modify - divide should remain active after one use | Closed | |
|
Task Description
1. When selecting the Scissors function, it deactivates after the cut is done. One can therefore not continuously select lines and cut it at the selected point. Each time the function has to be activated from the start.
|
|
335 | QCAD (main) | Feature Request | Low | Drawing preferences: Change font of dimensions | Closed | |
7 |
Task Description
Configure font used for dimensions.
|
|
344 | QCAD (main) | Feature Request | Medium | show warning if someone draws on locked layer | Closed | |
|
Task Description
|
|
346 | QCAD (main) | Feature Request | Low | Set up fixed grid | Closed | |
|
Task Description
Set up fixed grid without any auto scaling or adjusting or meta grid at all.
|
|
348 | QCAD (main) | Feature Request | Low | Dimensions: Inch / Architectural: supporess 0 feet | Closed | |
|
Task Description
Dimensions: Inch / Architectural: supporess 0 feet
|
|
355 | QCAD (main) | Feature Request | Low | Remember function for dimension Option | Assigned | |
|
Task Description
I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.
Why Remember Function: If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.
|
|
359 | QCAD (main) | Feature Request | Low | Bigger lineweights | Closed | |
|
Task Description
Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!
Regards
Clive
|
|
366 | QCAD (main) | Feature Request | Low | Draw circles tangent to other entities | Closed | |
2 |
Task Description
Hi Andrew
It would be useful to have an option in the Circle tools to be able to draw a circle tangent to other entities such as lines/circles etc.
Regards
Clive
|
|
367 | QCAD (main) | Feature Request | Low | Snap "Reference" also for an arc ... | Closed | |
1 |
Task Description
The Snap “Reference” is perfect working on circles.
I would be nice to have this function also on Arc’s. There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.
|
|
384 | QCAD (main) | Feature Request | Low | Menu icons under Mac OS X | Closed | |
|
Task Description
Make this an option. Default should be no icons since icons are unusual for Mac OS X application menus.
|
|
388 | QCAD (main) | Feature Request | Low | More options for Polygons ... | Closed | |
3 |
Task Description
Possibility to draw Polygons with a given dimension for across flats (not only corners).
|
|
393 | QCAD (main) | Feature Request | Low | Scrolling with arrow keys | Closed | |
|
Task Description
Scrolling with arrow keys
|
|
396 | QCAD (main) | Feature Request | Low | Blocks: moving blocks: show bounding box | Assigned | |
|
Task Description
Blocks: moving complex blocks with drag and drop should show bounding box as preview
|
|
397 | QCAD (main) | Feature Request | Low | ISO project: circles and arcs as ellipses | Closed | |
|
Task Description
ISO project: circles and arcs as ellipses
|
|
398 | QCAD (main) | Feature Request | Low | status bar: avoid scientific display | Closed | |
|
Task Description
status bar: avoid scientific display of large float numbers
see also: http://ribbonsoft.com/rsforum/viewtopic.php?t=1717
|
|
404 | QCAD (main) | Feature Request | Low | New Program Icon | Closed | |
|
Task Description
Pretty icon for Gnome 3 desktop favorite.. Kind of subjective :)
|
|
408 | QCAD (main) | Feature Request | Low | Script Macro recorder | Closed | |
3 |
Task Description
Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.
|
|
417 | QCAD (main) | Feature Request | Low | Autosave Dateinamen Nummer ersetzten mit Datum. | Closed | |
|
Task Description
Wenn ich das Autosave System richtig verstanden habe funktioniert es so:
Nach Ablauf der eingestellten Zeit wird eine Datei mit Nummer im angegebenen Zielordner abgelegt. Diese Nummer ist weder fortlaufend noch sicher auf- oder absteigend - also keinerlei Hinweis im Dateinamen für den Anwender welches nun die letzte Sicherung ist. Ziel scheint zu sein das man eine Sicherung pro Tag hat, richtig?
Allerdings ist die Anzahl der Sicherungen pro Tag abhängig von der Anzahl der neu gestarteten QCAD Sitzungen. Starte ich das Programm einmal für den ganzen Tag habe ich eine einzige Sicherung von jeder bearbeiteten Zeichnung. Sicherungen haben dann die selbe Nummer und werden deshalb jeweils überschrieben.
Starte ich das Programm 10 mal pro Tag habe ich 10 Sicherungen (vorausgesetzt ich bearbeite die selbe Zeichnung in jeder Sitzung) mit unterschiedlichen und nicht in Reihe laufenden Nummern. Sicherungen können somit nicht überschrieben werden und am ende des Tages könnten leicht zig wenn nicht hunderte Sicherungen gespeichert sein.
Würde nun diese Nummer im Dateinamen ersetzt mit dem aktuellen Datum habe ich eine Sicherung pro Tag unabhängig wie oft ich QCAD an diesem Tag gestartet habe. Zudem kann der Anwender gleich den Sicherungstag im Dateinamen erkennen und muss sich nicht durch die “geändert am” Info sekundengenau kämpfen.
Macht das Sinn?
|
|
425 | QCAD (main) | Feature Request | Low | Custom properties | Closed | |
1 |
Task Description
Assigning custom properties to entities and possibly layers and other objects.
|
|
426 | QCAD (main) | Feature Request | Low | Scriptable entities | Closed | |
|
Task Description
Provide script functionality for entities:
Paint or decorate entity, for example based on custom properties assigned to the entity
Listen and react to events
|
|
431 | QCAD (main) | Feature Request | Low | Construction lines | Closed | |
4 |
Task Description
Construction lines (’infinite’ lines).
|
|
437 | QCAD (main) | Feature Request | Low | trim 2 ends | Closed | |
|
Task Description
Selecting two enteties as borders for the entety to trim on both ends.
|
|
448 | QCAD (main) | Feature Request | Low | Put the asterisk in tab title of modied files in front ... | Closed | |
|
Task Description
Put the asterisk in tab title of modified files in front of the name, so it can be seen, when there are so many tabs, that the names will be truncated.
|
|
454 | QCAD (main) | Feature Request | Low | combined move/rotate/scale with two reference points | Closed | |
|
Task Description
It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.
|
|
455 | QCAD (main) | Feature Request | Low | logical operations for polylines | Assigned | |
|
Task Description
A missing feature in my work are logical operations (combine, intersect, ..) for polylines
Example: Draw some elements, select them, say combine. The result will be the outline of all elements.
|
|
467 | QCAD (main) | Feature Request | Low | Feature request for new Arc tool option to add to Arc s... | Assigned | |
2 |
Task Description
For and behalf of mandrena
To add another Arc tool option in Arc tools set:
1.Specify Start point for Arc. 2.Specify End point for Arc. 3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!
|
|
471 | QCAD (main) | Feature Request | Low | Feature request -to make the Library browser "dockable" ... | Closed | |
|
Task Description
It would be very useful to be able to “dock” the library browser in the main QCAD window.
|
|
477 | QCAD (main) | Feature Request | Low | crop objects at page margins | Closed | |
|
Task Description
It would be nice if QCad would print only objects inside page margins (i.e. to print a detail of a large drawing with margins). At the moment objects are visible up to page borders, and exporting to PDF with re-printing to a larger page contains even more objects.
|
|
482 | QCAD (main) | Feature Request | Low | Disproportionate scaling of blocks | Closed | |
|
Task Description
Block with hatch scaled with factor in X different from factor in Y leads to problems if contour contains arcs (which cannot / are not scaled disproportionally).
|
|
488 | QCAD (main) | Feature Request | Low | Font preference for dimensions | Closed | |
|
Task Description
It would be nice to have a selectable fonts for dimension text.
|
|
491 | QCAD (main) | Feature Request | Very Low | Show keycodes in menus. | Closed | |
|
Task Description
In the 2.2.2 version was possible to suppress the display keycodes in menus. You can also restore it in version 3?
See attach.
|
|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
501 | QCAD (main) | Feature Request | Low | Dimension labels: R prefix | Closed | |
|
Task Description
Is it possible to add the “R” prefix (Radius) in the label drop box when dimensioning?
|
|
502 | QCAD (main) | Feature Request | Low | Points on line: enter distance instead of number of poi... | Assigned | |
1 |
Task Description
Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.
|
|
503 | QCAD (main) | Feature Request | Low | Convert entities to points with a fixed distance | Assigned | |
|
Task Description
Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.
See also forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834
|