|
1699 | QCAD (main) | Feature Request | Low | Dimensioning - add option to insert text in the middle ... | Assigned | |
|
Task Description
Dimensioning - add option to insert text in the middle of dimension.
To have an option to have text aligned in the middle of the dimension line, rather than above it.
|
|
1700 | dwg2pdf | Feature Request | Low | dwg2pdf: output multiple layouts | Assigned | |
|
Task Description
Add support to specify multiple blocks (layouts) to output (one per page).
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1708 | QCAD (main) | Feature Request | Low | Layer > Select Layer: add feedback | Closed | |
|
Task Description
Win 7 Q-CAD 3.19.2
R-Click in Layer list With a selection, selecting by Layer adds the Items on that Layer to the selection. With a selection, deselecting by Layer subtracts the Items on that Layer from the selection. This is not a bug in casu because this can be the intention of the function. Adding or Subtracting.
Intuitively ‘selecting by Layer’ to retrict to that Layer solely has only the desired effect if no selection existed before. Deselecting by Layer with no previous selection should mention there was none to start with. Selecting by Layer from an empty Layer should mention that nothing is added.
Faults are prone to make.
Selecting a Layer uniquely would be an interesting additional feature.
Regards
|
|
1709 | QCAD (main) | Feature Request | Very Low | Feature request: Add extra padding to textbox. | Closed | |
|
Task Description
When placing text on a drawing you are offered with the choice of where you want the origin of the textbox to be. That’s very nice. Image 1 shows an example of text with top left origin. It seems there is already some top padding above the text.
Unfortunately there is no option to add extra padding to the other sides so the text is right to the left border of the textbox. To correct this you have to add some parallel construction lines and move the text a bit to the right. Now the text has nice padding. See image 2.
It would be nice to have some padding options when adding/editing text, like in web-design: https://www.w3schools.com/css/css_padding.asp
|
|
1722 | QCAD (main) | Feature Request | Low | Option to insert viewport at either of the rectangle co... | Assigned | |
|
Task Description
Hi Andrew,
Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.
Hope that makes sense.
Many thanks
Clive
|
|
1731 | QCAD (main) | Feature Request | Low | Option to place text to other side | Assigned | |
|
Task Description
Hi Andrew,
It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(
Many thanks
C;live
|
|
1763 | QCAD (main) | Feature Request | Low | Simple Modify Move function | Closed | |
|
Task Description
Moving things require an extra click on ‘Delete original’ and a click on ‘OK’
A simple Modify Move functionality will reduce mouseclicks for moving by 2 for every move that is made.
Regards
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
1779 | QCAD (main) | Feature Request | Low | Layer list, block list, etc: add support for internatio ... | Closed | |
|
Task Description
The attached screenshot will make clear what the problem is: “échelle” should be between “cotes” and “platines”, not at the bottom. “e” and “é” must be considered the same letter when ordering alphabetically.
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
1815 | QCAD/CAM | Feature Request | Low | Add Laser tool option | Assigned | |
|
Task Description
Hi Andrew,
Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.
Attached a laser tool proposal
|
|
1819 | QCAD (main) | Feature Request | Low | Additional Options for "Paste along Entity" | Closed | |
|
Task Description
Please see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098
|
|
1821 | QCAD (main) | Feature Request | Medium | Export svg with linetype parameter | Closed | |
|
Task Description
Hi,
as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.
Example: ...
<!-- Line -->
<path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>
...
Thanks, Soma
|
|
1823 | dwg2pdf | Feature Request | Low | plotting error to pdf a Dwg where the view port is not ... | Assigned | |
|
Task Description
When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up the data in the view port is plotted north up. see attached DWG and pdf for clarification.
|
|
1824 | dwg2pdf | Feature Request | Low | dwg2pdf does not obey frozen layers in paper-space view... | Assigned | |
|
Task Description
We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up. dwg2pdf should obey the specific frozen layer for each viewport
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
1836 | QCAD (main) | Feature Request | Low | Offset for paste along entity | Assigned | |
|
Task Description
add a new parameter “offset” in the dialog “Paste along entity”
see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307
|
|
1838 | QCAD (main) | Feature Request | Low | Carbide Create import | Assigned | |
|
Task Description
Add support for importing Carbide Create files (.c2d).
Format is JSON based, human readable.
|
|
1841 | QCAD/CAM | Feature Request | Low | QCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ... | Assigned | |
|
Task Description
Add SPx; with x being pen number from 1-8.
TODO: - Which color corresponds to which pen number? - What if there are more than 8 colors in a DXF files?
|
|
1844 | QCAD/CAM | Feature Request | Low | HP/GL (PLT) import | Assigned | |
|
Task Description
Hi Andrew
QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.
|
|
1846 | QCAD/CAM | Feature Request | Low | Toolpath preset offsets | Assigned | |
|
Task Description
Hi Andrew
A request for adding some fields to the toolpath
|
|
1848 | QCAD/CAM | Feature Request | Medium | PWM Laser | Closed | |
|
Task Description
Hi Andrew,
I have added a PWM Laser post processor.
You can add it to QCAD’s post processor directory
|
|
1852 | QCAD (main) | Feature Request | Low | Layer state management | Closed | |
|
Task Description
- Store layer states under a name - Restore layer states - Remove layer states object - Update layer states object
|
|
1856 | QCAD (main) | Feature Request | Low | SVG import: add support for rotate transformations with ... | Closed | |
|
Task Description
QCAD seems either to mishandle or ignore svg group transformations altogether.
Importing the attached file into QCAD renders the largest polygon (polygon18) to be rotated and misplaced. This is shown in actual.png. The expected result (original Inkscape renedering) is shown in expected.png.
Looking at the code of the original drawing it can be observed there is a transformation applied to the group which polygon18 is in:
<g
style="stroke-width:0.35433099;stroke-miterlimit:4;stroke-dasharray:none"
id="g20"
transform="rotate(-90,316.66796,298.95141)" >
<path
inkscape:connector-curvature="0"
id="polygon18"
d="..." />
Removing the ‘transform’ attribute produces virtually identical (erroneous) rendering in Inkscape as well.
|
|
1858 | QCAD (main) | Feature Request | Low | Enter measurements from drawing into line inputs | Closed | |
|
Task Description
Add option to line input context menu to enter a distance from the drawing, measured from two points. Perhaps existing measuring tools can be re-used to feedback values into line edits to avoid duplication.
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=6111
|
|
1863 | ECMAScript | Feature Request | Low | WidgetFactory.saveState: save state of checkable QGroup... | Assigned | |
|
Task Description
QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf
|
|
1870 | QCAD (main) | Feature Request | Low | Stretch tool / option to turn selection restriction on... | Assigned | |
|
Task Description
Hi,
since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.
That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?
It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.
|
|
1877 | QCAD/CAM | Feature Request | Low | Post Processor Tutorial | Assigned | |
|
Task Description
Hallo Andrew,
I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.
Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?
|
|
1890 | QCAD (main) | Feature Request | Low | Possibility to address an QCAD extern font folder | Assigned | |
|
Task Description
Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD.
The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.
|
|
1895 | QCAD (main) | Feature Request | Low | Add support for block transformation matrices | Assigned | |
|
Task Description
Support transformations by transformation matrix for block references.
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333
|
|
1901 | QCAD/CAM | Feature Request | Low | CAM Traverse Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.
Example added as pdf.
Greetings
|
|
1902 | QCAD/CAM | Feature Request | Low | CAM G-Block Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.
|
|
1911 | QCAD/CAM | Feature Request | Low | Drill Toolpath | Assigned | |
|
Task Description
Hallo Andrew
It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.
|
|
1914 | QCAD/CAM | Feature Request | Low | CAM layer On/Off | Closed | |
|
Task Description
Hallo Andrew
If CAM layer invisible do not 3D Simulate and do not write G-code.
|
|
1917 | QCAD (main) | Feature Request | Low | Automatic labels with static information of the drawing | Assigned | |
|
Task Description
I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)
This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
1921 | QCAD (main) | Feature Request | Very Low | Add error message when requesting raster for a non-exis ... | Closed | |
|
Task Description
(sorry for duplicate task, cannot remove it now)
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
1922 | dwg2bmp | Feature Request | Very Low | Add error message when requesting raster for a non-exis... | Assigned | |
|
Task Description
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
1934 | QCAD (main) | Feature Request | Low | Diametric text - overlaid | Assigned | |
|
Task Description
Diametric text is always placed above a horizontal measurement.
I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.
To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.
A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.
Similarly for a vertical measurement, the text is overlaid and illegible.
When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).
Kind regards Simon
|
|
1959 | dwg2pdf | Feature Request | Low | The table cell is not autofit the content | Closed | |
|
Task Description
Good afternoon, I found a bug.
Original file: 跨海大桥.dwg
Converted file: 跨海大桥.pdf
Bug description file: problem6.png
As you see, the content is not fit in the table cell.
|
|
1966 | dwg2pdf | Feature Request | High | Add a new option to convert all blocks to pdfs | Closed | |
|
Task Description
Relative to https://www.ribbonsoft.com/bugtracker/index.php?do=details&task_id=1965
I suggest that if dwg2pdf have an new options that can convert all the blocks to pdf. Now, I need to know all the block names before converting.
But if I put qcad on server, the computer won’t know how many blocks in the dwg and their names.
For examples:
There are 4 blocks in dwg.block1, block2, block3, block4
Command line: ./dwg2pdf -block-all path
Result: block1.pdf block2.pdf block3.pdf block4.pdf
|
|
1968 | dwg2pdf | Feature Request | High | Add a -max-lineweight option | Closed | |
|
Task Description
Good afternoon! I have a suggestion.
Relative to https://www.ribbonsoft.com/bugtracker/index.php?do=details&task_id=1964
I did not find option -max-lineweight. Please see the attachment.
|
|
1981 | QCAD/CAM | Feature Request | Low | I would like an external post processor | Closed | |
|
Task Description
I use gcode ripper for some of my jobs. (see here: https://www.scorchworks.com/Gcoderipper/gcoderipper.html) This is a large python script that I use to wrap flat code around a cylinder for engraving. What I would like to see is a way to run it from my own custom post processor that I wrote for my machine. Maybe some kind of keyword that allows me to specify an arbitrary external command with some parameters. It would be very helpful to me. I create a lot of ad-hock jobs to run.
Thanks, Chuck Tilbury
|
|
1982 | QCAD (main) | Feature Request | Low | measure DIN 1356 | Assigned | |
|
Task Description
To measure in the format DIN 1356 , Architect It is hard work to do this manual input with meta characters.
|
|
2004 | QCAD (main) | Feature Request | Low | Library Browser: configurable icon background color | Closed | |
|
Task Description
Add preference for library browser icon background color.
|
|
2034 | QCAD (main) | Feature Request | Low | Paint Properties to include modifying linetype scales w... | Assigned | |
|
Task Description
Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result. QCAD Pro 3.24 Windows10.
|
|
2037 | QCAD (main) | Feature Request | Low | Support alternative angle reference | Assigned | |
|
Task Description
E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.
|