QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
 1907 QCAD/CAMBug ReportLow having issues importing and opening dxf files  Closed
100%
Task Description

can not import dxf files

 1908 dwg2maptilesBug ReportLow dwg2maptiles: Transparent background not cleared Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6389

 1909 QCAD (main)Bug ReportLow Blocks invisible when loading disappear when made visib ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=6377

Regression caused by fix to  FS#1899 .

 1910 QCAD (main)SuggestionLow Please take a look at 1898 again Closed
100%
Task Description

Please take a look at 1898 again. There is a problem.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

 1912 QCAD/CAMBug ReportLow Tool Description Error Closed
100%
Task Description

Hallo Andrew,

Testing the drill toolpath I find it hard to select the correct tool by a small bug

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

 1914 QCAD/CAMFeature RequestLow CAM layer On/Off Closed
100%
Task Description

Hallo Andrew

If CAM layer invisible do not 3D Simulate and do not write G-code.

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

1916QCAD (main)Bug ReportLowMoving an object in an angled viewport with mouse does ...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport to 90 degrees
4. Place view-port in paper space
5. Select the view-port in paper-space by clicking it
6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.

Actual

The object in the viewport moves down vertically NOT to the right

Expected

The object moves to the right

(It seems mouse movement does not compensate for the rotated angle of the viewport)

Workaround

None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

 1918 QCAD (main)Bug ReportLow Splines whit control points of order 1 and 4 not select ...Closed
100%
Task Description

Set up a spline with control points let’s say of the order 3.
Clone it 3 times with some offset in x&y.
Edit the degree property and set 1ste to 1, 2nd to 2, aso
Draw select partially from right to left.
Those of the order 1 and 4 aren’t selected.

Regards

 1924 QCAD (main)Bug ReportLow SweepAngle = 0 Closed
100%
Task Description

Win7pro 32bit Wininstaller Qcadpro 3.23.0

Draw an arc.
Select the arc.
In Property Editor:
Set start angle to 135
Set end angle to 135

SweepAngle = */-360

edit the end angle and add “+360”, hit enter

SweepAngle = 0

An arc with zero sweep is a point.
A point is not an arc.
With the same start and end parameter an arc should have a sweep of +/-360.
As for entries by points or by angles.

Regards

 1925 QCAD (main)SuggestionLow Poly Ref Points manipulation that generates null-segmen ...Closed
100%
Task Description

Win7pro 32bit Wininstaller Qcadpro 3.23.0

With a polyline.

Select the poly.
Pick any reference point of a vertex.
Place it on any of its neighboring vertex reference points.

A null-segment is created.
The placement can not be undone by re-picking the reference point.
Can be Undone/Redone.
The action can result from editing the vertex coordinates.
When exploding null-entities are created.

This action should delete:
- if the target is next: the picked vertex. (incl. start or end-1)
- if the target is prior: the targetted vertex. (incl. start or end-1)
- if the target is and next and prior: both the prior and the picked vertex.

As the user intentionally places any vertex reference points on:
- any excluding its neighbors:
→ the intented nature is ‘Self-Touching’, ‘Self-Crossing’ or ‘Trace-Back’.
- any of its neighbors:
→ the intention is to delete the segment(s).

Regards

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

 1931 QCAD (main)Bug ReportLow File > SVG Export: hatch arc interpolation Closed
100%
Task Description

Hatches with arc boundaries are exported as crude polygons.

See also:
https://qcad.org/rsforum/viewtopic.php?f=33&t=6494

 1933 QCAD (main)Bug ReportLow File > Advanced SVG export: file overwrite check doesn' ...Closed
100%
Task Description

In the Advance SVG Export dialog, when I edit the filename to be different than the default file that already exists and then clear the checkbox for “Overwrite existing file without asking” just to make sure that I haven’t already created a file with the modified name as well, then I get a popup warning that the export would overwrite the default filename, not the name as edited. In other words, the overwrite check ignored the fact that I edited the filename.

Observed on MacOS Mojave (10.14), but probably applies to all.

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

 1935 QCAD (main)Bug ReportLow Startup preferences Closed
100%
Task Description

Startup preferences

On Mac 10.14.6: QCAD Pro → Preferences... → Startup

Check or uncheck “Enable Splash Screen”

1. Restart of QCAD, the splash screen with Initialising add-ons xx% is identical

2. Apply, Cancel and OK buttons - why have both Apply and OK buttons?

 1936 QCAD (main)Bug ReportLow ver 3.23 not saving font information Closed
100%
Task Description

The attached file is not saving font preference.
All fonts on the online layer are reported as the standard font. If I highlight one or all of the text entities and change the font to something like Yu gothic light, the property page reports yu gothic light and the screen reflects the changed font.
If I save, close and reload, the fonts for all text is again “standard”.

So then I try to enter new text via the “A” draw text command icon. I select “Broadway.ttf” as the main font in the text entry dialog.
One word “Broadway” is entered as the text. it appears on the upper left of the screen as expected and the font name is Broadway in the property editor. If I look at the dxf file source there is a whole bunch of text styles.
I save and close the file, and then open it again. Now the word Broadway has changed to font name “standard” in the property editor and is very definitely not the Broadway.ttf font.

I am not the originator of the file, I am just trying to change the font. If I start a new file and enter new text the font saves just fine, so I am thinking it is a setting somewhere, but I am unable to find it.

We (me and my customers) use these files for engraving so exact font is critical.

 1937 QCAD (main)Bug ReportLow Circle shown in QCAD but not in AutoCAD Closed
100%
Task Description

The attached drawing shows two large concentric circles when viewed in QCAD but the inner circle is missing when viewed in other CAD programmes. This cost $50 in rework as my laser cutting was not cut correctly!

 1939 QCAD Community EditionBug ReportLow Right click not working in QCAD Community Edition Closed
100%
Task Description

After I remove the .dll files from the pro trial version, right click stop working on Windows 10.
I went a little further to try identifying which of the 5 files specifically causes right click to stop working, and I found that it is qcadproscripts.dll. The presence or absence of the other 4 dll files that make up the pro version has no influence on this behavior.

 1941 Snapshot ReleaseBug ReportLow Invisible layers displayed Closed
100%
Task Description

Snapshot release 3.23.0.2

See also:
https://qcad.org/rsforum/viewtopic.php?p=24757

 1942 QCAD (main)Bug ReportLow Draw > Circle > Two tangents and point: fails for case  ...Closed
100%
Task Description

The result of the tool CT2 depends on the position where the circle is constructed.

See also https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6577&p=24772#p24772

 1943 QCAD (main)Bug ReportLow Tool "New from Template" fails Closed
100%
Task Description

QCAD 3.23.0.2
File / New from Template fails in different situation like immediately after launching the tool, sometimes after changing directories in the dialog like from imperial to metric etc..
QCAD tries for ever (wait cursor) or even quits QCAD. It’s not a clear pattern ...

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6585

3.23.0.2 doesn’t works
3.23.0 works

Reported on Ubuntu 19.4, Win10

 1944 QCAD (main)Bug ReportLow Block toggle switch for visibility fails Closed
100%
Task Description

3.23.02 Block toggle switch for visibility fails.
3.23.0 Block toggle switch for visibility works.

 1945 QCAD (main)Bug ReportLow Splines saved incorrectly Closed
100%
Task Description

Closed splines (Control points) are saved as “not closed” with a new knot (when DXF is closed and re-opened).
Is this behavious intended ?

 1946 QCAD/CAMBug ReportLow CAM > Cam Legacy Export: Cut inner paths before outer p ...Closed
100%
Task Description

The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.

Attached is a link to the script files and gcode examples.

 1947 QCAD (main)Bug ReportLow Startup failure Closed
100%
Task Description

QCAD community, Git ba68e28d3d (current HEAD), fresh clean compile on Ubuntu 18.04/x64 (gcc 7.4.0, Qt 5.9.5)

QCAD version  3.23.0.2
Warning:  QApplication: invalid style override passed, ignoring it.
Warning:  Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning:  action not found: "Scheme"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
17:14:39: Debug:    "<global>() at 172"

Then QCAD exits (does not start). As far as I remember, 3.23.0.2 release was fine.

 1948 QCAD (main)Bug ReportLow Modify > Offset (through Point): Point orthogonal to en ...Closed
100%
Task Description

See also:
https://www.ribbonsoft.com/rsforum/viewtopic.php?t=6590

 1949 QCAD (main)Bug ReportLow Modify > Break out: Leftover (zero length line) after u ...Closed
100%
Task Description

When using D2 on the vertical line (orange line in the attached example) a small zero length line is left over. This doesn’t happen if the vertical orangle line were a finite, line with two distinct endpoints.

 1950 QCAD (main)Bug ReportLow File > Save As: File dialog offers unsupported export f ...Closed
100%
Task Description

QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected.
Tested the issue back to QCAD 3.18 - no version is able to save those file types.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980

 1952 dwg2pdfBug ReportLow Drawing problem for the object in pdf which converted b ...Closed
100%
Task Description

The original file is A5.dwg. I’m using QCAD professional 3.23.0. A5.pdf is converted by command line tool dwg2pdf.
I found the drawing problem in it. See the attachment file problem.png.

As you see, I write down 3 bugs in problem.png.

1. bug 1. The position of ‘green 90’ is wrong.
2. bug 2. The line width is too large. You can see dot in A5.dwg, but a line in A5.pdf.
3. bug 3. The ‘green 42’ is missing.

Thank you very much for your help!

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

 1955 dwg2pdfBug ReportLow Encoding or font error Closed
100%
Task Description

Morning, I found a bug.
Andrew, Thank you very much.

Original file: 跨海大桥.dwg

Converted file: 跨海大桥.pdf

Bug Description file: problem3.png

As you see, all the Chinese fonts are drawed as ???

 1956 dwg2pdfBug ReportLow Missing some drawing elements after being converted by  ...Closed
100%
Task Description

Morning, I found a bug.

Original file: 006–【武汉会展中心店】一层合用前室.dwg

Converted file: 006–【武汉会展中心店】一层合用前室.pdf

Bug Description file: problem4.png

As you see, there are too many drawings missing.

 1957 dwg2pdfBug ReportLow Missing some drawing elements after being converted by  ...Closed
100%
Task Description

Morning, I found a bug.

Original file: 006–【武汉会展中心店】一层合用前室.dwg

Converted file: 006–【武汉会展中心店】一层合用前室.pdf

Bug Description file: problem4.png

As you see, there are too many drawings missing.

 1958 dwg2pdfBug ReportLow Draw rectangle as ellipse Closed
100%
Task Description

Good afternoon, I found a bug.

Original file: 006–【武汉会展中心店】一层合用前室.dwg

Converted file: 006–【武汉会展中心店】一层合用前室.pdf

Bug description file: problem5.png

As you see, all the rectangle fills are drawed as ellipse.

 1959 dwg2pdfFeature RequestLow The table cell is not autofit the content Closed
100%
Task Description

Good afternoon, I found a bug.

Original file: 跨海大桥.dwg

Converted file: 跨海大桥.pdf

Bug description file: problem6.png

As you see, the content is not fit in the table cell.

 1960 dwg2pdfBug ReportLow dwg2pdf command fail Closed
100%
Task Description

Good afternoon, I found a bug.

Source file: B5.dwg.

Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -font-substitution Standard GBK path

After I used the command, the message “Warning: standard font not found” occured. And B5.pdf is not found.
Convert is fail.

 1961 dwg2pdfBug ReportLow Too many drawings are missing Closed
100%
Task Description

Hello, I found a bug.

Original file: 006–【武汉会展中心店】一层合用前室.dwg

Converted file: 006–【武汉会展中心店】一层合用前室.pdf

Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -block=布局1 path

Bug description file: problem8.png

As you see. I use dwg2pdf to export the block named “布局1”. There are too many drawings missing.

 1962 QCAD/CAMBug ReportLow CAM > Drill Toolpaths: Cannot be edited / updated from  ...Closed
100%
Task Description

Hallo Andrew,

Found a bug in the drill toolpath generator.

 1963 QCAD/CAMBug ReportLow Bug Font Standard OR Cam Config Closed
100%
Task Description

Hallo Andrew

Confronted with a bug in font Standard glyph ”s” (small S),
and a solution.

 1964 dwg2pdfBug ReportLow The width of line is wrong Closed
100%
Task Description

Morning, I found a bug.

Original file: 南博湾3-702户型.dwg

Converted file: 南博湾3-702户型.pdf

Bug description file: problem9.png

Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 path

As you see, the width of lines are wrong.
Please follow the red arrow in problem9.png.

 1965 dwg2pdfBug ReportLow More than one problems in it Closed
100%
Task Description

Original file: Connected King Room.dwg

Converted file: Connected King Room.pdf

Bug description file: problem10.png

As you see, there are 2 bugs:

1. There are 4 tabs in the original file. But dwg2pdf can only convert one tab to pdf.
2. After converting, the right column drawing is missing.

 1967 QCAD/CAMBug ReportLow Development snapshot: Toolpath generator problem Closed
100%
Task Description

Hallo Andrew,

I had updated QCAD/CAM to 3.23.0.2 and I am confronted with a major bug in the toolpath generator.

 1969 QCAD (main)Bug ReportLow font name not saving correctly Closed
100%
Task Description

0
STYLE

5

31D
330
239
100
AcDbSymbolTableRecord
100
AcDbTextStyleTableRecord

2

textstyle11
70

   0

40
0.0
41
1.0
50
0.0
71

   0

42
0.2

3

CASTELAR.TTF

4

1001
ACAD
1000
Castellar
1071

      0
1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

 1973 QCAD (main)Bug ReportLow File > SVG Export: polylines with large arc segments (> ...Closed
100%
Task Description

Create polyline from clockwise arc with total angle > 180°.
Export as SVG.
SVG path arc data does not export sweep correctly.

Showing tasks 1851 - 1900 of 2100 Page 38 of 42<<First - 36 - 37 - 38 - 39 - 40 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing