QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
 1758 QCAD (main)Bug ReportHigh Draw > Polyline > Create from Selected Entities: crash  ...Closed
100%
Task Description

(Re-)combining polys touching at node with ‘create from selected’ leads to application crash.

QCAD 3.20.1 Win7 32bit

In the file example 2.
Regards

 1759 QCAD (main)SuggestionVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
B2
- Modify D3
- Modify
MT

Questionable
- Modify RM
- Modify
CH
- Modify RN Less severe
- Modify
OF
- Modify OH
- Modify
SS

Regards

 1761 QCAD (main)Bug ReportLow Info Polyline area does not find polylines (II) Closed
100%
Task Description

Selecting Info // Polyline area
And hovering over a drawing with all kinds of entities.
Does not find any polyline on the drawing hovering over them.
Nor clicking on them.

Not a locked layer issue.
All are visible.

 1762 QCAD (main)Bug ReportVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Not served with the degration to ‘Suggestion’  FS#1759 .
Demanded closing  FS#1759  & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

Questionable:
- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

 1763 QCAD (main)Feature RequestLow Simple Modify Move function Closed
100%
Task Description

Moving things require an extra click on ‘Delete original’ and a click on ‘OK’

A simple Modify Move functionality will reduce mouseclicks for moving by 2 for every move that is made.

Regards

 1766 QCAD (main)Bug ReportLow Edit > Application Preferences: Tool Settings: cannot a ...Closed
100%
Task Description

I wanted to add a couple of toolbars to the Tool matrix via the Tool Settings application preferences but all options are greyed out (see attached screenshot). I tried with a new config file and the result is the same. Is this the expected behaviour?

 1769 QCAD (main)Bug ReportLow QCAD Help link to "FAQ's (Online) is broken Closed
100%
Task Description

QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page.
(Menu → Help → FAQ‘s (Online))

 1770 WebsiteBug ReportLow qcad.org shop language Closed
100%
Task Description

FR - Ok,
DE - Ok,

EN - not OK. Main text is in english, menu is in german.

 1771 QCAD (main)Bug ReportCritical Open file bug: QCAD fails to open a file with space or  ...Closed
100%
Task Description

Description:
QCAD fails to open a file with space or special characters in its name or in its path.
Special characters are “á”, “ç”, “Ê”, “ß”, “+” etc.

Steps to reproduce:
1. Open a file named with spaces or with special characters or a file inside a folder that is named with spaces or with special characters.

What happens
- Warning about import error and file is not opened

What would be the correct behavior
- The file would be opened


I have used QCAD for a long time waiting for developers to correct that issue, that happened with all versions QCAD I used.

It was a trivial behavior for programs in Windows to manipulate files and folders with spaces and special characters. That issue is like the conversion method is too old, like from MSDOS 8.3 limitations.

The people that just want to open a DXF file to work face with that issue and thinks “that QCAD does not open DXF files”, and give up using that software. I gave up in the past because that. I discovered that QCAD works fine with MSDOS 8.3 format, and I created a script to rename files and folders before opening them, but it is not for everyone.

As QCAD works well with open DXF format, I think it is a important software to eliminate DWG dependency. Also, I think it would be very simple to solve that in code and very important to correct it.

I do not know if DWG trial plugin avoid that issue.

 1773 QCAD (main)Bug ReportMedium File > PDF Export / SVG Export / Bitmap Export: file na ...Closed
100%
Task Description

Configure QCAD to use native file dialogs
Load file
Export file as PDF, SVG, Bitmap
File name suggested by file dialog is drawing file which means user might accidentally overwrite drawing file.

 1774 QCAD (main)Bug ReportHigh Draw > Polyline > Morph: crash under macOS Closed
100%
Task Description

Depolyment issue with qcaddwg plugin.

 1775 QCAD (main)Bug ReportLow Viewports: images sometimes not clipped at viewport edg ...Closed
100%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=89&t=5657

 1776 QCAD (main)Bug ReportLow Edit > Application Preferences: Tool Settings: cannot c ...Closed
100%
Task Description

Multikey shortcuts are broken in Qt.
QCAD needs its own implementation of shortcut handling which also affects shortcut configuration.

 1777 QCAD (main)Bug ReportHigh Crash when pasting / importing drawing with missing ima ...Closed
100%
Task Description

Importing or pasting a drawing which references a non-existing image crashes.

RGraphicsSceneDrawable or type image references deleted, temporary preview document through RImageData which leads to crash when trying to load the image.

 1778 QCAD (main)Bug ReportHigh Draw > Point > Single Point: Exception Closed
100%
Task Description

Exception due to invalid include path.

 1779 QCAD (main)Feature RequestLow Layer list, block list, etc: add support for internatio ...Closed
100%
Task Description

The attached screenshot will make clear what the problem is:
“échelle” should be between “cotes” and “platines”, not at the bottom. “e” and “é” must be considered the same letter when ordering alphabetically.

 1780 QCAD (main)Bug ReportLow QCad quits when you double-click a text Closed
100%
Task Description

QCad quits when you double-click a text; What’s wrong, QCad or file?

 1781 QCAD (main)Bug ReportHigh QCAD 3.21.2 crashes when selecting an entity in attache ...Closed
100%
Task Description

QCAD 3.21.2 x86_64 Linux crashes if I try to select any entity of the attached file. The qt4 legacy version is working fine.

 1782 QCAD (main)Bug ReportLow Successive middle mouse button zoom in/out: delay betwe ...Closed
100%
Task Description

I very much like the new middle mouse button zoom in/out and congratulate Andrew for implementing it so quickly but there’s an annoying delay that is necessary between successive zoom in/out actions. This is easily understood by comparing it to zooming in/out with the +/- keys. With the keyboard you can repeat zooms as quickly as the keyboard repeat rate allows; with the middle mouse button quick zooms are not possible.

 1783 QCAD (main)Bug ReportLow RArc::splitAt(): fails in some cases Closed
100%
Task Description

RArc::splitAt() works wrong in some cases.
To reproduce execute this script:

            var arc = new RArc(new RVector(0, 0), 100, Math.PI*2, Math.PI/2, true);
            var points = [];
            points.push(arc.getPointAtPercent(1/3));
            var arcs = arc.splitAt(points);
            if (arcs.length == 2) {
                qDebug("OK, arcs count:", arcs.length);
            } else {
                qDebug("FAILED, arcs count:", arcs.length);
            }

            arc.mirror(new RLine(0, 0, 0, 100));

            points = [];
            points.push(arc.getPointAtPercent(1/3));
            arcs = arc.splitAt(points);
            if (arcs.length == 2) {
                qDebug("OK, arcs count:", arcs.length);
            } else {
                qDebug("FAILED, arcs count:", arcs.length);
            }

The first case split in two arcs, but the second splits in one arc only.

I think the reason is the code in RArc::splitAt():

        ...
        if (RMath::getAngleDifference180(a1, a2))*radius()<0.001) {
            continue;
        }
        ...

The RMath::getAngleDifference180() return angle between -pi and pi so absolute value should be used.

 1784 QCAD (main)Bug ReportLow View > Property Editor: Block attribute labels with int ...Closed
100%
Task Description

Bei der Eingabe von Blockattributen im Eigenschaften Editor werden die deutschen Sonderzeichen nicht richtig wiedergegeben.

When entering block attributes in the Properties Editor, the German special characters are not displayed correctly.

 1785 QCAD (main)Bug ReportLow Template / Viewport scale issue Closed
100%
Task Description

Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1.
Drawing 1:1
First Viewport / scale 1:1 / inserted in Paper Space = everything fine,
Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.

 1786 QCAD (main)Bug ReportLow Block > Select Block References: not using active block ...Closed
100%
Task Description

... can’t find Block References if the Block which contains the Block References (Attributes) isn’t selected prior with the mouse.

The Selection Filter will find the Block References regardless which block is chosen in the Block List.

 1787 QCAD (main)Bug ReportLow View > Property Editor: Layer combo box not sorted Closed
100%
Task Description

Layer combo box in the property editor is not sorted.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5714

 1790 QCAD (main)Bug ReportLow Info fuction returns right dimensions but drawing dimen ...Closed
100%
Task Description

no task description

 1791 QCAD (main)Bug ReportLow Edit > Paste: relative zero point not set Closed
100%
Task Description

If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created.
I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.

Screenshot:
Clipboard content = circle

1. First insert

Restriction horizontal

2. Second insert

 1794 QCAD (main)Bug ReportLow Detect Duplicates / Options / Refresh Icon missing Closed
100%
Task Description

Please see also http://www.qcad.org/rsforum/viewtopic.php?f=32&t=5745

 1795 QCAD (main)Bug ReportVery Low Quit Menu Item disabled after opening preferences Closed
100%
Task Description

Quit Menu Item disabled after opening preferences.

System: OSX 10.13.6
Qcad version: 3.21.2.0

How to repeat:

  1. Open QCad
  2. Open preferences dialogue “QCad Pro → Preferences”
  3. Close dialogue
  4. The menu item “Quit QCad Pro” is now disabled. See attached screenshot

Repeatability: 100%

 1796 QCAD (main)Bug ReportLow File > Open Recent: crash when file is in Google Drive  ...Closed
100%
Task Description

When a file is opened from “File→Open Recent” on QCad Pro it gives a 100% repeatable crash if the file is on a folder synchronized with Google Drive. If the file is opened using “File→Open” instead it works as expected. See attached crash-log.

OSX specific. Does not happen on Linux with synchronized Google Drive folder

System: OSX 10.13.6

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

 1797 QCAD (main)Bug ReportLow Keyboard shortcuts not saved between sessions Closed
100%
Task Description

In 3.21.1, and 3.21.2 a change to a shortcut looses all previous shortcut changes.
This does not become apparent in the current session; a modified shortcut works fine together with all the previous modifications, until you close QCAD.
But-
When you re-open QCAD, the only customised shortcut available is the last one that was changed, every other customised keyboard shortcut has gone back to default.

Windows 10 64 , Gigabyte laptop i7 processor

 1798 QCAD (main)Bug ReportVery Low Drawing Pref > Linetype > Scale of linetypes matches th ...Closed
100%
Task Description

“Drawing Preferences / General / Linetype / Scale of linetypes matches the scale of each viewport” is checked by default for new drawings, however the option is not applied until you open the “Drawing Preferences / General / Linetype” screen and click OK – no need to change anything, just opening the screen and clicking OK is sufficient.

 1799 QCAD/CAMBug ReportVery Low Postprocessor: sign not forced for negative values roun ...Closed
100%
Task Description

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

 1800 QCAD (main)Bug ReportLow circle/arc intersection bug with line Closed
100%
Task Description

There is a case that qcad do not detect intersection between a circle/arc and a line. Attached is an example.

 1802 QCAD (main)Bug ReportLow Startpoint indication disapears for some entities while ...Closed
100%
Task Description

Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.

Entities that suffer from this are:
Other arcs
Polyline
Splines

Only the ‘oldest’ arc in selection will have a startpoit indication.
Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection.
Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.

In the file provided entities where drew in order from left to right.
Select all and start deseleting arcs from the left.

The behaviour is affected by changing the draw order property and a save/close/open.
In the second file the rightmost arc was set to draw order 7, the same as the 4th was.
After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.

Regards

 1804 QCAD (main)Bug ReportVery Low Application Preferences > Tool Settings: Filter for "Vi ...Closed
100%
Task Description

1. Search the Tool Settings for “View” and you will only find “Overlays” without the submenu information.
2. Check View manually without a search will provide the submenu information.

 1805 QCAD (main)Bug ReportLow Modify > Split Entities: broken for logically closed po ...Closed
100%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5825&p=21761

 1807 QCAD (main)Bug ReportLow The ORDINAL 3906 not found in LIBEAY32.DLL Closed
100%
Task Description

Hello
the message: The ORDINAL 3906 was not found in the LIBEAY32.dll dynamic-link library. is displayed each time QCAD is opened.
How to fix this problem
thanks in advance
cordially**

 1808 QCAD (main)Bug ReportLow Property Editor: Changing width, height, orientation fo ...Closed
100%
Task Description

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

 1809 QCAD (main)Bug ReportLow Draw > Viewport > Add Viewport: layout dialog combobox  ...Closed
100%
Task Description

Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),

Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block,
I choose Layout4 - the Viewport is placed on Layout2,

next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...

 1812 QCAD/CAMBug ReportLow Coordinate display: coordinates not updated while mouse ...Closed
100%
Task Description

The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.

This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?

MacOS 10.12.6

 1814 QCAD/CAMBug ReportLow FS#1813 Revisited Closed
100%
Task Description

 FS#1813  Revisited. (Several bugs in QCAD/CAM 3.21.3. when generating G-code in “G-code Laser (offset).)

Hi Andrew,

After closing the bug notification I realised I didn’t add the DXF. My apologies for not attaching the DXF-file at hand.

Fortunately I am not the only one;

You can fix the missing G01 by replacing your file postprocessors/GCodeLaserOffsetMM.js with the attached updated file.

Since it was not attached, that makes two of us.

Anyway I have attached the DXF-file to be tested.

 1817 QCAD/CAMBug ReportLow CAM Export: offset fails for contours with arcs (tolera ...Closed
100%
Task Description

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

 1818 DocumentationTaskLow QCAD Reference Manual / Paste along Entity ... Closed
100%
Task Description

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

 1819 QCAD (main)Feature RequestLow  Additional Options for "Paste along Entity" Closed
100%
Task Description

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

 1820 QCAD/CAMBug ReportMedium CAM Export: exporting text entities broken Closed
100%
Task Description

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

 1821 QCAD (main)Feature RequestMedium Export svg with linetype parameter Closed
100%
Task Description

Hi,

as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.

Example:
...

      <!-- Line -->
      <path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>

...

Thanks,
Soma

 1822 QCAD (main)Bug ReportCritical Cannot download old purchased QCAD due to expired link  ...Closed
100%
Task Description

Hi,

I logged in to my account, and checked my order. The link does not work anymore for the purchased item QCAD Pro.
Please help me ow can I download my Pro version QCAD.

Thanks,
Soma

 1825 QCAD (main)Bug ReportLow File > Svg Export: text exported with wrong height Closed
100%
Task Description

If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.

 1828 QCAD (main)Bug ReportLow Chinese language not loading correctly Closed
100%
Task Description

Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.

I’m using the Pro version 3.21.3.0

 1829 QCAD (main)Bug ReportLow Incorrect font weights in macOS 10.14 Mojave Closed
100%
Task Description

See QTBUG-69955 which affects QCAD on Mojave:
https://bugreports.qt.io/browse/QTBUG-69955

Showing tasks 1851 - 1900 of 2061 Page 38 of 42<<First - 36 - 37 - 38 - 39 - 40 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing