|
1414 | QCAD (main) | Bug Report | Low | No 'Dark' theme available in Linux | Closed | |
|
Task Description
In Linux Mint QCAD offers no ‘Dark’ theme, not sure whether this is a bug or not?
|
|
1415 | QCAD (main) | Bug Report | Low | Text TE - Only simple text possible | Closed | |
|
Task Description
Text - Only simple text is possible. Checked or unchecked option “Simple Text” will not change this. Reboot QCAD after changing shows also no effect.
|
|
1416 | QCAD (main) | Bug Report | Low | Dimension value for drawing unit feet | Closed | |
|
Task Description
If the drawing unit is set to ‘feet’ and the dimension format is ‘architectural’ or ‘engineering’, the drawing unit should be implicitly regarded as inch for the purpose of calculating dimension values. Since QCAD uses the drawing unit, the dimension values are off by a factor of 12 when importing drawings from other products.
|
|
1417 | QCAD (main) | Bug Report | Very Low | Dimension: missing tolerance icons in options toolbar | Closed | |
|
Task Description
e.g. Dimension > Horizontal: tolerance inputs should have an icon next to them.
|
|
1418 | QCAD/CAM | Feature Request | Low | Layerlist and hidden sublayer | Closed | |
|
Task Description
The layerlist shows at any operation all sublayer, even if they were previously hidden!
|
|
1421 | QCAD (main) | Bug Report | Low | Command line calculator: functions containing 'd' broke ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=4235&start=15
|
|
1422 | QCAD (main) | Bug Report | Low | Invalid application window position in QCAD3.ini leads ... | Closed | |
|
Task Description
QCAD3.ini may contain invalid positions for the main application windows, e.g. [Appearance] Position.X=-32000 Position.Y=-32000
This leads to an invisible main window after starting QCAD under Windows systems.
|
|
1423 | QCAD (main) | Bug Report | Low | Modify > Trim: wrong end of spline trimmed | Closed | |
|
Task Description
Modify > Trim Choose line as limiting entity Choose spline as entity to trim The part of the spline that was clicked should remain but is trimmed instead
|
|
1424 | QCAD (main) | Bug Report | Very Low | Edit > Undo: hatches not selected | Closed | |
|
Task Description
If a hatch is selected, then rotated or scaled and this is undone afterwards, the hatch is not selected anymore.
|
|
1426 | QCAD (main) | Feature Request | Very Low | Load drawings that were open when closing QCAD on start ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249
|
|
1427 | QCAD (main) | Bug Report | Low | Info Tool / Polylinie Area (II)/ Preview broken | Closed | |
|
Task Description
Print “Command Line” and as “Add measurement to drawing” works as expected.
|
|
1429 | QCAD (main) | Bug Report | Low | Command line calculator: functions containing number fo ... | Closed | |
|
Task Description
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=89&t=4235&start=15
|
|
1431 | QCAD (main) | Bug Report | Low | Polyline pattern rendering | Closed | |
|
Task Description
Dots in line patterns along polylines with property “Polyline Pattern” set to “Yes” are rendered as horizontal lines. See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4262
|
|
1432 | QCAD (main) | Bug Report | Low | Wrong x scale for imported texts | Closed | |
|
Task Description
If text style has a text width (x scale) that is not 1, the property x scale from the text style is applied to all texts of that style. See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4266
|
|
1433 | QCAD (main) | Bug Report | Low | Cannot open file with erased layout | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4269
|
|
1434 | QCAD (main) | Bug Report | Low | File > Print: print offset | Closed | |
|
Task Description
Prints under Windows are offset by the default printer margins.
This is caused by QTBUG-5363, https://bugreports.qt.io/browse/QTBUG-5363
|
|
1436 | QCAD (main) | Bug Report | Low | Block > Create Library Item: item does not have same un ... | Closed | |
|
Task Description
Library items created from existing drawings should have the same unit as the drawing. Currently, the unit of newly created library items is ‘None’.
|
|
1437 | QCAD (main) | Bug Report | Low | Bug with Polyline > Offset | Closed | |
|
Task Description
Spotted a bug with Polyline > Offset (OQ)
On the attached file (png image, link : http://nikel.ovh/~tukuyomi/oq_bug.png ), the white entity is a polyline (1 line, 1 arc, 1 line). Using Polyline > Offset (OQ) with a big value (1100 in my case), I expect to get the green polyline. What I have is the red one (also CPU is maxed for some seconds every time I move the mouse.)
|
|
1438 | QCAD (main) | Bug Report | Low | MText with vertical alignment base saved with alignment ... | Closed | |
|
Task Description
Vertical alignment “base” (not supported for MText) is saved as “top”. Using “bottom” to replace “base” would be more appropriate.
|
|
1439 | QCAD (main) | Feature Request | Low | New CAM feature proposal: Cutplan (nesting) | Closed | |
|
Task Description
After designing one ore more parts you may want to produce them.
Maybe it is a flat part, made out of copper sheet metal. You need several copies of the part and you wonder how you can arrange them on your sheet metal in a clever way, so that you end up with as little waste as possible.
And here software could really speed up the process. It would be a great addition to QCADs CAM abilities if it would be able to produce a cutplan.
Enter the size of the sheet metal (or whatever material), select the part(s), enter number of copies and let QCAD find the best way(s) of arrangement. Additional parameters could be clearance between parts and border margin.
|
|
1441 | QCAD (main) | Bug Report | Low | Modify > Lengthen: unexpected behavior with polylines | Closed | |
|
Task Description
Modify > Lengthen with positive values can shorten the polyline in some cases. See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4303
|
|
1442 | QCAD (main) | Bug Report | Medium | Imported and saved dimensions reference empty blocks | Closed | |
|
Task Description
- Import drawing from other CAD application with dimension blocks (*D..) - Save file with QCAD - Dimension blocks are exported to drawing file but are empty which can break compatibility with other products
|
|
1444 | QCAD (main) | Bug Report | Low | Context menu: no entry to delete polyline node for firs ... | Closed | |
|
Task Description
Context menu does not show an entry to “Delete Node” for the first node of a polyline.
|
|
1447 | QCAD (main) | Bug Report | Low | Mouse cursors very small under Windows with high resolu ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4310
|
|
1448 | QCAD (main) | Bug Report | Low | Draw > Shape > Rectangle with Size: polygon option not ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4318
|
|
1450 | QCAD (main) | Bug Report | High | File > Save: Invalid Symbol Table Name | Closed | |
|
Task Description
Opens an Autocad .dwg file happily (Pro version x64). Allows you to make changes, when you go to save (or save as), you get the “Invalid symbol table name”.
It should figure this out when file is opened and squawk immediately.
Would be extremely useful to get some additional error details that might allow one to diagnose and fix the problem. i.e. “Invalid symbol table name: _” with the name of the offender.
I tried removing unused blocks, no joy.
|
|
1451 | QCAD (main) | Bug Report | Low | Space doesn't move focus to undocked command line (Linu ... | Closed | |
|
Task Description
Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4331
|
|
1453 | QCAD (main) | Bug Report | Low | Modify > Clip to Rectangle: exception when clipping poi ... | Closed | |
|
Task Description
- Create some points - Modify > Clip to Rectangle - Make sure some points are inside rectangle
→ Exception
|
|
1454 | QCAD (main) | Bug Report | Low | No HTML field for colours in Ubuntu Linux (Mint) | Closed | |
|
Task Description
No HTML field for colours in Ubuntu Linux (Mint).
|
|
1455 | QCAD (main) | Bug Report | Low | Orthographic Projection -Cylindrical, clipping query | Closed | |
|
Task Description
Please refer to attached drawing
1.Draw square 80mm x 80mm. 2.Draw circle in the centre 44mm dia. 3.Select circle and project using orthographic projection tool (cylindrical) with clipping enabled onto copy of square to the right. 4.Clipping should do what? is it suppose to clip the edges of the square? if so it doesn’t clip and doesn’t seem to make any difference whether I enable the ‘clipping’ option or not.
|
|
1456 | QCAD (main) | Bug Report | Low | Drag and drop: requires two clicks with auto snap | Closed | |
|
Task Description
Drag and drop requires two clicks with auto snap if grid snap and free snap are disabled for auto snap. - Edit > Application Preferences > Snap > Auto Snap: disable grid and free - Drag an entity and try to position it - First click does nothing, second click positions entity
|
|
1457 | Website | Bug Report | Low | Website FAQ Deutsch | Closed | |
|
Task Description
Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.
http://www.qcad.org/de/qcad-documentation/faq
|
|
1458 | QCAD (main) | Bug Report | Low | Draw > Polyline > From Segments: empty polyline created ... | Closed | |
|
Task Description
- Create four arc segments representing a full circle - Create polyline from segments
Empty polyline is created (caused by simplification).
|
|
1459 | QCAD (main) | Bug Report | Very Low | File > Revert: changes grid appearance | Closed | |
|
Task Description
... even if it wasn’t used in the saved drawing.
|
|
1461 | QCAD (main) | Bug Report | Low | Zoom in / out: not centred under mouse cursor if Retina ... | Closed | |
|
Task Description
see topic: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4381&p=15906#p15906
|
|
1465 | QCAD/CAM | Bug Report | Critical | Circle is drawn as polygon | Closed | |
|
Task Description
Hi,
I have a circle and circle is not round. Unit of drawing is in metres and radius is set to 2.38. The circle displays as a polygon instead.
|
|
1466 | QCAD (main) | Bug Report | Low | Toolbars on second screen cannot be accessed if second ... | Closed | |
|
Task Description
Hi,
One day I dragged print toolbar into another monitor. This worked ok when I had multiple monitor in the office. Then I took my laptop out where there is no external monitor connected. When I tried to use the QCAD I noticed that the tool bar I had dragged onto another monitor cannot be accessed. I cannot find a way to attach those floating toolbars...
Expected behaviour: Floating toolbars should be draggable or provide a button to attach it back to qcad main window.
No workaround to attach floating toolbars.
|
|
1467 | QCAD/CAM | Bug Report | Low | Short leader will not render the arrow | Closed | |
|
Task Description
Hi,
I tried to add a leader and for some reason the arrow does not appear. I found out that this occurs when the line is short. To me, line is sufficiently long enough but somehow QCAD thinks it is too short.
Screenshot shows added leader.
Also when I try to change arrow: no to “yes”, while the dropdown shows yes, I am not able to select it. It just defaults to no.
Workaround: Draw longer line.
|
|
1474 | QCAD (main) | Bug Report | Low | Dimension > Leader: changing options breaks tool | Closed | |
|
Task Description
Community 3.15.5.3 (Git 9c49f08b), FreeBSD 10.3, Qt 5.5.1
Start the Dimension Leader tool, click a point. While the rubber line is active, click the “Arrow head” option to toggle it (the effect is seen on the rubber line immediately). Now click it again to toggle. The entire dimension disappears with no appreciable trace left anywhere. The DL tool stays active.
Expected outcome would be for the dimension to just toggle the arrow head style.
This only seems to happen if this double-toggling is done as long as no segment is actually created yet (i.e. once at least one segment is actually set, the repeated toggling works as expected).
|
|
1475 | QCAD (main) | Bug Report | Low | Print Preview / fit to pages fails ... | Closed | |
|
Task Description
... in dependence to the used Units.
I have notice this behavior a couple times before but wasn’t sure what is the trigger for that. Now I figured out one (I’m sure there are more) scenario which shows the effect:
New drawing, Drawing preferences; Drawing Units: Meter, Meter, Metric,
Printing Page: ISO A4
Print Preview:
Auto fit drawing to page - fails to calculate the scale, Auto fit pages to drawing - fails also ...
Counter test: same drawing - change Paper Unit to mm, Reset Paper size to A4 ...
... and it works flawless
|
|
1476 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Radius: exception with a ... | Closed | |
|
Task Description
Draw > Circle > 2 Tangents and Radius Choose two arcs or two circles as tangential entities.
|
|
1477 | QCAD (main) | Bug Report | Low | exception in Viewport.js: sprintf not defined | Closed | |
|
Task Description
Git 21d95c48, Linux x64, Qt5
Starting QCAD causes it to crash:
QCAD version 3.15.5.4
02:17:30: Debug: RDxfPlugin::init
02:17:30: Debug: RExamplePlugin::init
02:17:30: Debug: TransactionListenerPlugin::init
02:17:31: Debug: TIMER: 187000000 ns ( 187 ms ) - "loading add-ons"
02:17:33: Debug: TIMER: 1492000000 ns ( 1492 ms ) - "initializing add-ons"
02:17:35: Debug: TransactionListenerPlugin::postInit
02:17:35: Debug: got transaction
Warning: RScriptHandlerEcma::eval: script engine exception: "ReferenceError: Can't find variable: sprintf"
Warning: "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) \
at /home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() at \
/home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() at \
/home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() at \
-1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() \
at scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
Warning: RScriptHandlerEcma::eval: script engine exception: "ReferenceError: Can't find variable: sprintf"
Warning: "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) \
at /home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() \
at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() \
at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() \
at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() \
at scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
Warning: At least one uncaught exception:
Warning: "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) at \
/home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() at \
/home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() at \
/home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() at \
-1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() at \
scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
02:17:35: Debug: "<global>() at 52"
Seems to be a fallout following a1941e2 (removal of sprintf.js from library includes).
Fix:
diff --git a/scripts/Widgets/Viewport/Viewport.js b/scripts/Widgets/Viewport/Viewport.js
index d9bc286..10b9b18 100644
--- a/scripts/Widgets/Viewport/Viewport.js
+++ b/scripts/Widgets/Viewport/Viewport.js
@@ -17,6 +17,8 @@
* along with QCAD.
*/
+include("scripts/sprintf.js");
+
if (new QFileInfo(autoPath("scripts/Navigation/DefaultNavigation/DefaultNavigation.js")).exists()) {
include("scripts/Navigation/DefaultNavigation/DefaultNavigation.js");
}
|
|
1478 | QCAD (main) | Bug Report | Low | compile qcad from git source problem | Closed | |
|
Task Description
I am following the instructions for compiling qcad from source
http://www.qcad.org/en/component/content/article/78-qcad/111-qcad-compilation-from-sources
I am using fedora 24 and qt4
git clone https://github.com/qcad/qcad
cd qcad qmake-qt4 -r this step ok make release this step fails
RSettings.cpp: In static member function ‘static QStringList RSettings::getPrinterNames()’: RSettings.cpp:722:12: error: ‘availablePrinterNames’ is not a member of ‘QPrinterInfo’
return QPrinterInfo::availablePrinterNames();
^~~~~~~~~~~~
RSettings.cpp: In static member function ‘static QString RSettings::getDefaultPrinterName()’: RSettings.cpp:726:12: error: ‘defaultPrinterName’ is not a member of ‘QPrinterInfo’
return QPrinterInfo::defaultPrinterName();
^~~~~~~~~~~~
Makefile.Release:2505: recipe for target ‘release/RSettings.o’ failed make[3]: *** [release/RSettings.o] Error 1
|
|
1479 | QCAD (main) | Bug Report | Low | Modify > Explode: too many segments for splines with la ... | Closed | |
|
Task Description
Exploding splines creates more segments than necessary in some cases with very large tolerances. The number of segments created should be the number of bezier spline segments times two.
|
|
1480 | QCAD (main) | Feature Request | Low | dwg2dwg: add command line switches to modify header var ... | Closed | |
|
Task Description
Add command line switches to dwg2dwg to change header variables during conversion (e.g. DIMASZ, DIMEXT, DIMTXT, ...)
|
|
1481 | QCAD (main) | Bug Report | Low | Block List: update changes selected item | Closed | |
|
Task Description
- Select a block in the block list. - Toggle the visibility of another block or add a block, etc. - Selected block changes
|
|
1482 | QCAD (main) | Bug Report | Low | FTBFS on FreeBSD | Closed | |
|
Task Description
Git 3ed32041, FreeBSD 10.3, amd64
Qt had been updated from 5.5.1 to 5.6.1 just recently. This resulted in two FTBFSs:
- Missing script bindings for 5.6.1:
--- /dev/null
+++ b/src/3rdparty/qt-labs-qtscriptgenerator-5.6.1/qt-labs-qtscriptgenerator-5.6.1.pro
@@ -0,0 +1,4 @@
+include( ../../../shared.pri )
+
+SUBDIRS = ../qt-labs-qtscriptgenerator-5.5.0/qtbindings
+TEMPLATE = subdirs
After this,
- Project ERROR: Unknown module(s) in QT: webenginewidgets
--- a/shared.pri
+++ b/shared.pri
@@ -46,8 +46,8 @@ macx-ios-* {
!r_mobile {
greaterThan(QT_MAJOR_VERSION, 4) {
- greaterThan(QT_MINOR_VERSION, 5) {
- # Qt >= 5.6
+ greaterThan(QT_MINOR_VERSION, 6) {
+ # Qt >= 5.7
QT += webenginewidgets
}
else {
|
|
1485 | dxflib | Bug Report | Low | dxflib: Lines are on the wrong layer when processing dx ... | Closed | |
|
Task Description
I create a drawing using QCAD which is stored using dxflib. For some reasons dxflib must be used. This drawing contains arcs and lines on a separate layer. If the dxf file is processed by an other tool only the arcs are referenced to the specific layer. The lines are referenced to the standard layer 0. It doesn’t matter if I’m using the community edition or the pro edition.
After a some investigations I found that the created dxf file is not correct. I manually corrected the dxf file and it works as it should.
For details please refer to the appended files. Take a look to the ENTITY section and the LINE entities, e.g. line 2370. It is just to swap two entities.
Thanks for support.
|
|
1487 | QCAD (main) | Bug Report | Low | On OS X using a trackpad pinch gesture to zoom in / out ... | Closed | |
|
Task Description
On OS X using a trackpad pinch gesture to zoom in / out breaks panning and zooming. When a drawing is opened or created, pan and zoom functions work as expected. As soon as you use a pinch gesture to zoom in/out all zooming and panning operations (toolbar buttons and scroll bars) begin producing erratic behavior. The drawing has to be closed and re-opened to restore proper operation. Other open drawing windows are not affected and work properly unless you pinch gesture zoom in their window.
|
|
1490 | QCAD (main) | Suggestion | Low | Text Edit Control <ESC> maps to <cancel>. If anything i ... | Closed | |
|
Task Description
For all the Linux VI editor geeks, can you disable the <ESC> function in the text edit mode. <ESC> maps to <cancel>. If anything it should map to <ok>. Which creates no harm as it can be later undone. I have accidentally lost edits countless times due to an unbreakable habit.
|