QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

 1283 QCAD (main)Bug ReportHigh Crash when snapping to intersection points between zero ...Closed
100%
1 Task Description

Create spline through point P.
Create zero length line at P.
Snap to P → crash.

1287QCAD (main)Feature RequestLowInformation tool shows absolute units in print previewAssigned
0%
1 Task Description

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

1288QCAD (main)Feature RequestLowPrint Preview Scaled RulersAssigned
0%
1 Task Description

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

1312QCAD (main)Feature RequestLowMake dimension label decimal separator configurableAssigned
0%
1 Task Description

Make dimension label decimal separator configurable (DIMDSEP).

 1329 QCAD (main)Bug ReportLow Property Editor: Changing value of block attribute sets ...Closed
100%
1 Task Description

Attributes are not fixed on their layer. When changing the content of an attribute the content is automatically placed on the active layer not on the attribute layer.
It would be much better if changing an attribute would not result in a change of the assigned layer.
For an example look also on www.qcad.org/rsforum/viewtopic.php?f=89&t=3870

Thomas

 1335 QCAD (main)Bug ReportLow Wrong tangential snap point by moving an existing line  ...Closed
100%
1 Task Description

When I try to make a tangential snap of an existing line to a circle by moving one line end to the circle, qcad snaps to a wrong snap point on the circle.

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
1 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
1 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

1373QCAD (main)Feature RequestLowLine From Angle - additional option to select exisitng ...Assigned
0%
1 Task Description

Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.

 1387 QCAD (main)Bug ReportLow Offset tool not working on rounded polylines Closed
100%
1 Task Description

When “offset whole polyline” is selected and the mouse is moved over a rounded polyline, the preview is not working at least in Window 7/8.
This worked in older versions e.g. 3.6.3.

There is an example appended with an edged inner polyline and a rounded outer one. For the inner one, the offset preview is working as expected, for the rounded one it isn’t. Tested on two different PCs, one Win7 and the other one Win8.

Also see:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4009

 1394 QCAD (main)Feature RequestLow Arc length dimension Closed
100%
1 Task Description

Support arc length dimenions (undocumented DXF entity ‘ARC_DIMENSION’).
Create arc length dimensions with parallel extension lines for angle < 90, orthogonal extension lines otherwise.
Display arc symbol beside or on top of label text.

 1419 QCAD (main)Bug ReportLow Multi-Monitor enviroment - Option toolbar didn't work Closed
100%
1 Task Description

Hello everybody,

I’m using QCAD 3.14.3 on Ubuntu Linux 64bit wit a two monitor enviroment.
When I place the option toolbar from the top of main window onto the second monitor, it’s impossible to input a distance. The cursor is missing.
Seems that the input-field is only working correct, when the option toolbar is connected to the main-window.

Hope I described the issue understandable, if not, please don’t hesitate to ask me for further descriptions...

Whould be nice to fix this bug...

Best regards

Andreas

 1420 QCAD (main)Bug ReportLow Multi-Monitor environment - Commandline toolbar didn't  ...Closed
100%
1 Task Description

Hello everybody,

I’m using QCAD 3.14.3 on Ubuntu Linux 64bit with a two monitor environment.
When I place the commandline-toolbar from the bottom of main window onto the second monitor, it’s impossible activate the commandline by pressing SPACE or CTRL+M. Only when I click into the commandline-toolbar with the mouse-cursor it’s been activated.

Hope I described the issue understandable, if not, please don’t hesitate to ask me for further descriptions...

Whould be nice to fix this bug...

Best regards

Andreas

1446QCAD (main)Feature RequestLowNew Polygon toolAssigned
0%
1 Task Description

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

1449QCAD (main)Feature RequestLowProperty Editor: show centroid of polylinesAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

 1460 QCAD (main)Bug ReportVery Low Two Display Environment --> Problems with Toolboxes and ...Closed
100%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
0%
1 Task Description

Hi,

I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Workaround:
Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1471QCAD (main)Feature RequestLowFile > Open file locationAssigned
0%
1 Task Description

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.

 1484 QCAD (main)Feature RequestLow Dimensions: optionally use comma instead of dot Closed
100%
1 Task Description

Use comma to display dimension labels.

1489QCAD (main)Feature RequestLowEdit > Drawing Preferences > Dimensions: Add option to ...Assigned
0%
1 Task Description

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

1502QCAD (main)Feature RequestLowInfo tool / Setting for Font and Size ... Assigned
0%
1 Task Description

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

 1517 QCAD (main)Bug ReportLow Modify > Break out Segment: fails with closed polyline Closed
100%
1 Task Description

Occurs when breaking out segment from closed polyline with more than two intersecting entities.

This also affects the hatch from segments tool when used with closed polylines.

Example:
https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf

 1525 QCAD (main)Bug ReportLow Block attributes: escaped unicode sequences in files no ...Closed
100%
1 Task Description

The characters in Portuguese such as “ç é â ... etc ...” are replaced by codes starting with version 3.16.x
Files created with versions of QCAD 3.15.x whose characters were correct in the Properties List when opened by QCAD 3.15.x appear in this strange way when opened in versions 3.16.x.
However, in the screen and in the extraction of the list of attributes the characters are correct.
Apparently the error only occurs in texts on the Block Properties List and Attributes.
However, you can use correctly the characters in a file created from version 3.16.x

Exemplo: “dormitory’ in portuguese is “dormitório” it’s appear like “DORMIT\U+00d3RIO” when file is opened on QCAD 3.16.x

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

 1530 QCAD (main)Bug ReportLow Draw > Circle > 3 Tangents: solutions not found Closed
100%
1 Task Description

Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)

When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.

I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.

I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.

Hope you can confirm my findings.

 1535 QCAD (main)Bug ReportLow File > Save: image references of deleted images remain  ...Closed
100%
1 Task Description

by inserting and deleting many figures in the drawing the references to these figures are not excluded from the dxf / dwg file structure, if you exclude a figure and include it again, the reference is duplicated, etc .. this causes an increase of the size of the files dwg / dxf.

 1539 QCAD (main)Feature RequestLow One more "Offset" option: Infinitive Line ... Closed
100%
1 Task Description

hi,

I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need.
Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation.
This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

 1543 QCAD (main)Bug ReportLow Input with dead-keys broken (Linux) Closed
100%
1 Task Description

Latin characters do not work in version 3.16.5 on Linux, such as ã, õ, é, à, the curious thing is that “ç-” works. If on your machine the Latin characters that do not work are not appearing follow a bitmap for visualization.

 1548 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: exception Closed
100%
1 Task Description

Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

 1558 QCAD (main)Bug ReportLow unlayed lines Closed
100%
1 Task Description

DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.

 1566 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: deleted bl ...Closed
100%
1 Task Description

Deleted (undone) block attributes are stored to DXF/DWG.

 1570 QCAD (main)Feature RequestLow make the stretch tool more flexible in selecting nodes Closed
100%
1 Task Description

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

 1576 QCAD (main)Feature RequestLow add option to switch off dialog for modify: rotate tool ...Closed
100%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

 1599 QCAD (main)Bug ReportLow Commandline - Can not insert @ - No relative coordinate ...Closed
100%
1 Task Description

Hello,

since 3.17.1 (also on 3.17.2.0) it’s impossible to insert “@” in commandline, so it’s impossible to work with relative coordinates in all funktions like rectangle, line etc.
Please do a fast Bugfix, I need that functionality for workflow urgently :-)

Regards

Andreas

Linux Mint 64bit
Cinnamon
Kernel 4.11.6

QCAD 3.17.2.0

 1605 QCAD (main)Bug ReportLow Edit > Paste: Empty layers created when pasting to curr ...Closed
100%
1 Task Description

Copy - Paste to current layer from an other drawing creates empty layers, where the entities orininated from, in the drawing where they are pasted to.

 1607 QCAD (main)SuggestionVery Low Indent 'Spline Segments:' in explode preferences Closed
100%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

 1637 QCAD (main)Bug ReportLow Buttons Layer List Widget acting on other open file  Closed
100%
1 Task Description

With multiple files open 4 of the 5 buttons of the Layer List Widget are acting on an other file that is open instead of acting on the file in focus.
in this condition only Add Layer YA acts on the file in focus.

Not easy to reproduce.
Encountered it more frequent
after copy with ref and pasting.
with more then 2 files open.
with similar drawing file names.
Did reproduce after several hopping between files.
Usually acts on the first open file but this can be different as in the example.

workarround none; save all; close all; close Qcad; reopen and redo.

 1648 QCAD (main)Feature RequestLow Uniform Layer listing in dropdown as in Layer List Widg ...Closed
100%
1 Task Description

The order layers are listed in dropdown boxes is different as how there are presented in the Layer List Widget.
Uniformity can shorten lookup time drastically with a large number of layers / sublayers.

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

 1693 QCAD (main)Performance IssueLow Formatted text is not correctly displayed Closed
100%
1 Task Description

Texts justified and/or formatted in dxf or dwg files generated by Autocad not presented correctly when the file is opened by QCad, follow file for verification.

Showing tasks 201 - 250 of 2250 Page 5 of 45<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing