QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
2157QCAD (main)Bug ReportLowControlpoint Spline exploded to polyline may induce NaN...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Documented in 3.25.2.4, reproducible under 3.25.2.7
In the attached file:
→ Explode the trial cases and locate NaN Widths.
→ These faulty widths are cleared while saving and reverting.
= work around.

Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902
Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901
Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6

Arctic_Eddie reports failing CAM offset at exactly these points !!!
Reported is a faulty arc with radius of over 360,000mm.
- I can not reproduce this under QCAD working further on the Polys with NaNs.
- However the direct offset of such controlpoint Splines is erroneous.
(see file in post 30902)

Arctic_Eddie reports arc radii of over 10,000mm.
- These don’t seem to be faulty.
- I agree that BiArc fitting should be bound to a lower and certainly to an upper limit.
- That should be huge otherwise faint curvature is represented by many
wobbles or too quick by straight lines.
(All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)

Regards,
CVH

2159QCAD (main)Bug ReportLowDraw > Polyline > Polyline from Selection: may induce N...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

2160QCAD (main)Bug ReportLowDraw > Polyline > Relocate Start Point: fails on polyli...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

 2165 QCAD (main)Bug ReportLow Rectangle with Size (RS) doesn't remember Fill, RoundCo ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900
Report: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900#p30977

Rectangle with Size (RS) doesn’t update the Fill, RoundCorners & Radius settings shared under the [Shape] header in QCAD ini.

Explained as group synchronization while the Polygon methods have more settings in common, although not shared.

In the summary there are more minor issues listed.
All have a bar in the Options Toolbar that disappears after the first is drawn.

I rather would opt for all individual settings ...
... or all grouped.

Regards,
CVH

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

 2168 QCAD (main)Bug ReportLow Explosion of a bulging Polyline with Widths may include ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Follow up on: https://www.qcad.org/bugtracker/index.php?do=details&task_id=2023
The zero crossing at 180° turn is fixed.

Found two very minute Line segments where the Width is set zero.
Revision dxf included.

Referring to the grid they are rendered about 0.0002 long.
They are in the order of 5e-15 and less or simply zero long in this case (<1ULP).
Results may vary in length ... and vary after Save/Revert.
Files included: PolyWidthErrLargeArc_v2.csv (a/b)

Not encountered on a Polyline with line segments.

Regards,
CVH

 2170 QCAD (main)Bug ReportLow Draw > Text: Wrong color for formatted text blocks usin ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

File & picture included
Work around: Chop it up or use a TTF font

Regards,
CVH

2174QCAD (main)Bug ReportLow[SOLVED] Numerous shortcomings when exploding Polylines...Assigned
0%
1 Task Description

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

2177DocumentationSuggestionLowUpdate class_r_polyline.htmlAssigned
0%
1 Task Description

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

2178QCAD (main)Bug ReportLowStored Color of text dimension changesAssigned
0%
1 Task Description

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

2192QCAD (main)Feature RequestLowAdd "Define angle using mouse cursor" to Move and Rotat...Assigned
0%
1 Task Description

The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool

 2196 QCAD (main)Bug ReportLow Leader: Arrow removed on load if arrow only fits first  ...Closed
100%
1 Task Description

Andrew,
This is bugging me for over a year now.
I filed it as a feature request as it is dismissed twice as a possible bug on the forum.
In both cases the advice is to only use Specific Scale 0 for Leaders.
(... and adapt all other dimensions to that)

I am aware that an arrow head has to fit twice on the first leg of a Leader Entity.

The size is set global in the Drawing Preferences under Dimension Settings: ‘Text Height’.
Under Dimension Settings, there is also a global ‘Size scale factor’.
And every dimension entity has a Specific Property called ‘Scale’ that supersedes this global ‘Size scale factor’.

Proof of concept: Dim size 5 and for any regular dimension.
1) Size scale factor 1, Specific Scale 0 » text height & arrow length = 5 units.
2) Size scale factor 2, Specific Scale 0 » text height & arrow length = 10 units.
3) Size scale factor 2, Specific Scale 1 » text height & arrow length = 5 units.
4) Size scale factor 1, Specific Scale 2 » text height & arrow length = 10 units.
5) Size scale factor 10, Specific Scale 0.5 » text height & arrow length = 2.5 units.
6) Size scale factor 99, Specific Scale 0.1 » text height & arrow length = 0.5 units.
→ Obvious is that the ‘Specific Scale’ supersedes the dimensions ‘Size scale factor’.

Those two last Leader arrows (2.5 & 0.5 long) would definitely fit twice on an 8 units long first Leader leg! And they do perfectly while drawing them.

However, the arrow will be reset when the file is saved & loaded.

For case 5 the first leg has to be (2 times 5×10) 100 units or over so an arrow 2.5 long remains on save (=40 times). In the absurd case 6 that would be (2 times 5×99) 990 units or over for an arrow only 0.5 units long (=1980 times).
Verfied and true.

It seems that on save/load:
The Specific Scale is not taken into consideration while evaluating ‘At least twice’.

Apart from that they render fine when first drew.
And reappear when setting the arrow back on again after load.

Regards,
CVH

 2197 QCAD (main)Feature RequestLow Selection Filter: add properties Length and Area Closed
100%
1 Task Description

It would be nice if we could use the length of a polyline as a search criterion too.

Selection Filter, Property for Polyline, “Length” Comparison: same like Line?

Thanks. ;-)

 2198 QCAD (main)Bug ReportLow International characters change when saving and reloadi ...Closed
100%
1 Task Description

Text font changes when saving and reloading the file.
Original text before saving:
ľščťžýáíé ôúäň
Text after reopening the file:
¾šèžýáíé ôúäò
See also attachments.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

 2240 QCAD (main)Bug ReportLow Block Attributes not showing on "Specific Properties" o ...Closed
100%
1 Task Description

I just updated my QCAD to 3.26.2.0 (3.26.2) version and lost the hability to edit block attributes of my sheet or in any other block.

I tried to save as the drawing and the problem persists.

When I open the block, the attribute is there and is all set in the Specific Properties, but when I exit to the Model Space to edit the Attribute text, the created attributes don’t appear on Specific Properties tab.

The use of block attributes in sheets, balloon or any block that contains text is very necessary.

 2244 QCAD (main)Feature RequestLow Add poyline segment midpoint to 'Store Positions' Closed
100%
1 Task Description

Andrew,

Besides that Misc .. Information .. ‘Store Positions’ - stores the startpoint of each polyline
- or stores all nodes of each polyline (With: InfoStorePositions/PolylineNodes = true)
Refering to https://qcad.org/rsforum/viewtopic.php?t=6300

I somethimes require the midpoints of the line and arc segments as spline controlpoints
+ the start and the endpoint when geometrical open.

Could that be made an undocumented preference too?

Regards,
CVH

 1071 QCAD (main)Feature RequestVery Low (Bitmap) scaling convenience option Closed
100%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

 1154 QCAD (main)Feature RequestVery Low Add preference for round reference points Closed
100%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

 1460 QCAD (main)Bug ReportVery Low Two Display Environment --> Problems with Toolboxes and ...Closed
100%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

 1607 QCAD (main)SuggestionVery Low Indent 'Spline Segments:' in explode preferences Closed
100%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

 1743 QCAD (main)Bug ReportVery Low Draw > Text: Wrong bounding box for text with empty sup ...Closed
100%
1 Task Description

Hi,

I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.

Thanks,
Soma


 1765 QCAD (main)Bug ReportVery Low Errors with polyline offset Closed
100%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
1 Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

2098QCAD (main)Bug ReportVery LowOffset will pick up hidden blocks while using it in a l...Assigned
0%
1 Task Description

When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden.
It is not happening with all the block.

2107QCAD (main)Feature RequestVery LowAdd a button to the tool bar to allow for a quick backg...Assigned
0%
1 Task Description

I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.

 2126 QCAD (main)SuggestionVery Low PE casts on individual hatch segments Closed
100%
1 Task Description

QCADpro 3.25.2.1 / win7pro 32 bit / 4GB / 1e generation i7 2.6Ghz / HDD GeForce GT 520

The method PE casts the clipboard on individual hatch segments.
Hatches should be considered as a single complex entity not allowing certain actions.

Discovered while:
https://qcad.org/rsforum/viewtopic.php?f=33&p=30008#p30008

Not that it matters: In doing so the scaling is off too.

Regards,
CVH

2138QCAD (main)SuggestionVery LowBlock zoomstate supersedes Model_Space after Undo of BCAssigned
0%
1 Task Description

Summary: Block zoomstate supersedes Model_Space after Undo of BC

QCAD Professional
Version: 3.25.2.1 (3.25.2.1)
Internet: QCAD.org
Build Date: Oct 15 2020
Revision: 2895712
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown «< (Win installer 32 bit)

With the file provided:
ZW to see the top green ‘revision cloud’ up close
QQ
Box select around the cloud
»> 2 entities in selection
BC, select origin somewhere inside the selection, accept proposed naming
»> ‘Block 1’ is created from the selection
TN
BD, select the newly created Block Reference
»> Auto zoom of ‘Block 1’ (Intended behavior)
OO
»> Returns to Model_Space with the zoomstate of the removed Block
»> Halfway down the drawing
»> The former zoomstate of the Model_Space is lost

Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378

This proves they do, even if the block doesn’t exists anymore.

Regards,
CVH

PS: 3th trial to enter a suggestion ...

 2139 QCAD (main)Feature RequestVery Low Auto revert to format = 'Decimal' isn't complete Closed
100%
1 Task Description

From this Topic:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7818

Trial 1 doesn’t gives the intended result.
Trial 2 includes manual altering back and forth the Format field what gives the intended result

Regards,
CVH

2146QCAD (main)SuggestionVery LowKeep 'Invisible' objects invisible while savingAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882
Explanation found in REntity.cpp
Listed as a Public Member Functions inherited from RObject

Regards,
CVH

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

 2151 QCAD (main)Bug ReportVery Low Update viewport on Layout after Layer property change Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

With the attached file:
Viewing Layout1
Changing ON/OFF or Frozen state of layers in the Layer List

The view doesn’t update immediate.
Selecting an entity: Yes
After QQ Yes
Switching to another Application and reverting the focus back to QCAD: Yes
Using zoom / pan or the Zoom functions: No
Changing the display modes: Yes
Starting an action: No

2155QCAD (main)Bug ReportVery LowFaulty rendering Polyline Arcs with Width = 2RAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Most likely not related to the QCAD version, rather an old sore.

File included
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803
Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’

Polyline arcs with Width = 2R render as circle segments rather than circle sectors.
As Non-reversed arcs these don’t explode.
As reversed arc these explode to a single arc rather than a circle sector contour.

There is also still the faulty rendering with Z not zero
https://qcad.org/bugtracker/index.php?do=details&task_id=1923

Regards,
CVH

2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

 2180 QCAD (main)Feature RequestVery Low Surface area off a hatch Closed
100%
1 Task Description

That would ease this task:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8000

Correct surface area included.
CVH

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2194QCAD (main)Bug ReportVery LowMultiple selection of entities with custom properties d...Assigned
0%
1 Task Description

QCAD Professional
Win7 installer 32 bit
Version: 3.25.2.13 (3.25.2.13)
Internet: QCAD.org
Build Date: Feb 12 2021
Revision: cad2d36
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

In the file provided one would expect *VARIES* in the property editor under custom properties when selecting 2 or more entities.
The key list is reduced to what keys are common to the multiple selection. (Here 3)
The values displayed are inconsistent depending the selection.

Select All » 3 custom properties of line 3
Select the 3 vertical » 3 custom properties of line 2
Select the first vertical and the diagonal » 3 custom properties of line 1
Select all but the first vertical » 3 custom properties of line 3
And so on ...

Regards,
CVH

 2218 ECMAScriptBug ReportVery Low RPolyline.appendVertex() doesn't default to width = zer ...Closed
100%
1 Task Description

When I use poly.appendVertex(vector, bulge) the polyline is finally created with NAN widths

This, while the signature explains that bulge, width1 and width2 default to zero.
https://www.qcad.org/doc/qcad/latest/developer/class_r_polyline_entity.html#a9ee706e50d6cc267fc84a85b7c81d5e6

Regards,
CVH

 2219 ECMAScriptTaskVery Low Update simple_create.js addSimpleText() Closed
100%
1 Task Description

Andrew,

Reading:
https://www.qcad.org/rsforum/viewtopic.php?&t=8286

Can you update addSimpleText() as Text.Width is fixed =100

What is the noTextWidth value?

As far as I can detect ...
PrintPreviewImplPro.prototype.addDecorations uses value 1.
CrankWheel.js uses value 1.
ExText.prototype.beginEvent uses value 2.
ExDrawFonts.prototype.beginEvent uses value 1.
Counter.prototype.getOperation uses QCAD.ini or default zero.
TextAlong.prototype.getTextData usses the width of the textData from the dialog.

Regards,
CVH

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

 15 QCAD (main)Bug ReportCritical new created drawing can't be loaded Closed
100%
Task Description
  1. create new drawing
  2. draw a line
  3. save it as DWG or DXF
  4. close it
  5. re-open it → nothing is shown, nothings is selectable

no obvious errors or warnings in the console output

 222 QCAD (main)Bug ReportCritical MacOS X Lion Installation problem Closed
100%
Task Description

Installation problem.
After uneventful installation on MacOS X Lion 10.7.1 on a MacBook Pro Core I5 the QCAD will not launch by clicking into the app. When trying to launch the application by the command line I received an error message regarding the “plugin” folder, as follows:

al:MacOS everaldo$ ./QCAD
application directory: “/Applications/QCAD.app/Contents/MacOS”
working path: “/Applications/QCAD.app/Contents/Resources”
plugins folder does not exist

Renaming the folder from “/Applications/QCAD.app/Contents/PlugIns” to “Applications/QCAD.app/Contents/plugins” solved the problem.

Regards.

Everaldo de N. Peixoto
[email protected]

 226 QCAD (main)Bug ReportCritical Editing and saving a file Closed
100%
Task Description

Hello,
Just started with the program. I opened drawing made under 2.2 pro to modify it. Everything works ok (deleting entities) but as soon as I start removing unused layers, I get an error message when trying to save my work (photo attached). The previouly saved file becomes an empty file...Working on Win7x64, logged as admin.
JJ

Showing tasks 301 - 350 of 2280 Page 7 of 46<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing