|
1511 | QCAD (main) | Bug Report | Low | Preferences not saved | Closed | |
|
Task Description
as read in http://www.qcad.org/rsforum/viewtopic.php?t=2957, I want to edit my preferences, but it does not save from one session to the other.
I meet the same problem state here, http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&p=7287&hilit=preferences+save#p7287 but the solution two have one change at the time does not work for me. octal permits are: 120 -rwxrwxrwx@ 1 dr staff
should I change the group ?
In ini file at line 78, it points to a java script: scripts/Pro/Edit/AppPreferences/ShortcutPreferences, where is that stored ?
|
|
1513 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: Layer created, sel ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583
|
|
1514 | QCAD (main) | Bug Report | Low | Block attributes: association with block reference lost ... | Closed | |
|
Task Description
Create block reference with attribute Copy block reference and attribute Paste
The copied attribute is now associated with the first block reference instead of the second.
|
|
1515 | QCAD (main) | Bug Report | Low | hatch fail | Closed | |
|
Task Description
The hatch window does not open in version 3.16.1
|
|
1516 | QCAD (main) | Suggestion | Low | QT style on Linux | Closed | |
|
Task Description
The startup script still forces a QT-style; Getting bored of that one, qcad runs fine with the system default style - probably that was a qt4 thing, that can be removed, so it blends better with the DE?
18c18 /opt/qcad/qcad < LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@” —
LD_LIBRARY_PATH=”$DIR” “$binary” “$@”
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1519 | QCAD (main) | Bug Report | Low | Ruler precision always zero | Closed | |
|
Task Description
Rulers show only whole numbers.
|
|
1520 | QCAD (main) | Bug Report | Low | Modify > Rotate: rotating splines changes start/end tan ... | Closed | |
|
Task Description
- Create spline from fit points - Rotate spline - Spline shape changes due to erroneous start/end tangents
Similar problem when reversing spline from fit points.
|
|
1521 | QCAD (main) | Bug Report | Low | Modify > Offset: fails in certain cases with short arcs | Closed | |
|
Task Description
Offset curve not trimmed / clipped correctly.
Offset distance: 2.5
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1523 | QCAD (main) | Bug Report | Low | Draw > Hatch > Hatch from Segments: fails for circle in ... | Closed | |
|
Task Description
- Draw circle inside other circle - Draw > Hatch > Hatch from Segments - Click both circles - Right-click
|
|
1524 | QCAD (main) | Bug Report | Low | Command line: cannot enter @ sign in command line on Ge ... | Closed | |
|
Task Description
@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.
This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.
Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.
|
|
1525 | QCAD (main) | Bug Report | Low | Block attributes: escaped unicode sequences in files no ... | Closed | |
1 |
Task Description
The characters in Portuguese such as “ç é â ... etc ...” are replaced by codes starting with version 3.16.x Files created with versions of QCAD 3.15.x whose characters were correct in the Properties List when opened by QCAD 3.15.x appear in this strange way when opened in versions 3.16.x. However, in the screen and in the extraction of the list of attributes the characters are correct. Apparently the error only occurs in texts on the Block Properties List and Attributes. However, you can use correctly the characters in a file created from version 3.16.x
Exemplo: “dormitory’ in portuguese is “dormitório” it’s appear like “DORMIT\U+00d3RIO” when file is opened on QCAD 3.16.x
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
1528 | QCAD (main) | Bug Report | Low | Block attributes: relationship with block reference los ... | Closed | |
|
Task Description
The blocks that are included in drawings by version 3.16.4 do not obey the rule “select attributes along with block references” while in version 3.15.5 in the same drawings and for the same blocks the rule is obeyed. Note: Blocks already included in the previous version will enforce this rule in the new version.
|
|
1529 | QCAD (main) | Bug Report | Low | File > Save: error if dimension text size is zero | Closed | |
|
Task Description
The error shown in the attached figure (print sreen) appears when you try to create a library item from the selection. Versions 3.15.5 and 3.16.4 on Windows 10 and Linux Mint; Sometimes terminates the QCad program.
|
|
1530 | QCAD (main) | Bug Report | Low | Draw > Circle > 3 Tangents: solutions not found | Closed | |
1 |
Task Description
Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)
When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.
I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.
I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.
Hope you can confirm my findings.
|
|
1532 | QCAD (main) | Bug Report | Low | Selection Problem ? | Closed | |
|
Task Description
Please attached file. When dragging a selection window across only the cyan lines -I get only one line selected?
|
|
1533 | QCAD (main) | Bug Report | Low | I can not print and I can not export to "pdf" file (Qca ... | Closed | |
|
Task Description
I can not print and I can not export to “pdf” file. I use the latest professional version of Qcad with windows 10. Thank you
|
|
1534 | QCAD (main) | Suggestion | Low | Headless Styling | Closed | |
|
Task Description
Since the launcher batch no longer requests “-style plastique” QT wants to apply the native style of the desktop environment. This fails on a headless system (or where the current user has no graphical shell to connect to) with the message “Gtk-WARNING **: cannot open display: “. Fortunately, QT provides a workaround in addtion to the new “platform=offscreen” flag.
In the tools that set -no-gui, beforehand export these variables into the environment
export QT_STYLE_OVERRIDE=""
export QT_QPA_PLATFORM=offscreen
export DISPLAY=""
PS: QT-offscreen will not find fonts; unfortunately the workaround only allows for a single directory to search them (I need helvetica):
export QT_QPA_FONTDIR="/usr/local/share/fonts/type1"
Maybe that should get reported upstream, so that like LD_LIBRARY_PATH several directories could be specified.
|
|
1535 | QCAD (main) | Bug Report | Low | File > Save: image references of deleted images remain ... | Closed | |
1 |
Task Description
by inserting and deleting many figures in the drawing the references to these figures are not excluded from the dxf / dwg file structure, if you exclude a figure and include it again, the reference is duplicated, etc .. this causes an increase of the size of the files dwg / dxf.
|
|
1537 | QCAD (main) | Feature Request | Low | Draw > Shape: Add option to fill shape (add solid fill) | Closed | |
|
Task Description
Add an option to create a solid fill hatch for shape tools.
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
1540 | QCAD (main) | Bug Report | Low | Draw > Line > Parallel: Changing back to Auto has no ef ... | Closed | |
|
Task Description
Draw > Line > Parallel - switch type to Line, XLine or Ray - switch back to Auto - Parallel is always line segment
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1543 | QCAD (main) | Bug Report | Low | Input with dead-keys broken (Linux) | Closed | |
1 |
Task Description
Latin characters do not work in version 3.16.5 on Linux, such as ã, õ, é, à, the curious thing is that “ç-” works. If on your machine the Latin characters that do not work are not appearing follow a bitmap for visualization.
|
|
1544 | QCAD (main) | Bug Report | Low | Crash when selecting spline | Closed | |
|
Task Description
This is an interesting bug on my machine. The attached file crashes on 3.15.5, works perfectly well on 3.11.0 and 3.7.5
To see the problem open the file and click on the upper spline. QCAD disappears.
dajo
|
|
1545 | QCAD (main) | Bug Report | Low | File > Open: Crash on some Linux setups | Closed | |
|
Task Description
A curious fact is occurring here QCad 3.16.5 is aborting the opening of files in 90% of the attempts on a machine with native Linux Mint 18.1 and works normally in a virtual machine under Virtualbox in Windows 10, tests were done on the 3 machines (VM-Linux, Nat-Linux and Win 10) with QCad 3.15.5 and everything works normally. The two notebooks tested have Intel I-7 RAM = 8Gb Ram and 4 processors. Follow 02 files for evaluation.
|
|
1546 | QCAD (main) | Bug Report | Low | 'Open file' dialog shows no files - although the direct ... | Closed | |
|
Task Description
I have many .dxf files created in QCad-2.2.2.0 (which I still use) all of which open in LibreCad without issues.
If I try to open a file in the version below (or an earlier fairly recent version) the file chooser dialog is empty.
Version: 3.16.5.0 (3.16.5) Build Date: Feb 20 2017 Qt Version: 5.6.2 Architecture: x86_64 Compiler: gcc 5.4.0 OS: Mageia 6 x86_64 with plasma5 D.E
However if I copy a file name from the same directory using Dolphin file manager and paste it into the filename field in the chooser (which is showing no files) the file opens up correctly.
I reported this in Mageia bugzilla here against an earlier version but there was no response as I think the maintainer is MIA. https://bugs.mageia.org/show_bug.cgi?id=18816
Today I decided to try the latest version in the hope that this issue would be fixed (I am also a packager with Mageia) but it is still the same.
I will add the build log as an attachment in case you see something that may be specific to our configuration.
It would be good if we could resolve this before the imminent release of Mageia 6 ;)
Running from CLI I see these around the time I open the file chooser dialog: ——–snip———
22:05:02: Debug: TransactionListenerPlugin::postInit 22:05:02: Debug: got transaction 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:19: Debug: got transaction 22:05:47: Debug: got transaction 22:06:08: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:06:09: Debug: got transaction ———-snip——–
|
|
1547 | QCAD (main) | Bug Report | Low | PDF won't print out properly | Closed | |
|
Task Description
Hi Andrew
I have attached a file which was drawn in QCAD, but for some reason when exported to PDF from QCAD it doesn’t print out properly,all I get is the dimensions only.
When printed direct from QCAD all is fine?
Regards
Clive
|
|
1548 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: exception | Closed | |
1 |
Task Description
Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.
|
|
1549 | QCAD (main) | Feature Request | Low | Separate Coordinate Display from Drawing Dimensions | Assigned | |
|
Task Description
Source: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752
According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.
|
|
1550 | QCAD (main) | Bug Report | Low | Block references: mirrored block references in 3rd part ... | Closed | |
|
Task Description
Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.
|
|
1551 | QCAD (main) | Bug Report | Low | File > Bitmap Export: exception when image size too lar ... | Closed | |
|
Task Description
Hi friends,
I have this traceback with my Qcad from ppa for linux, to export in png image: Warning: libpng warning: Image width is zero in IHDR Warning: libpng warning: Image height is zero in IHDR libpng error: Invalid IHDR data Error: cannot save file: /home/patrinux/Bureau/IMAGE.png Error: Unknown error Debug: got transaction Warning: RScriptHandlerEcma::eval: script engine exception: “Error: :-1:-1: Wrong number/types of arguments for RMainWindowQt.handleUserWarning(). <native>() at -1 <anonymous>() at scripts/File/BitmapExport/BitmapExport.js:56 <native>(RActionAdapter(0x26d1ea0)) at -1 <global>() at 1” Warning: “<anonymous>()@scripts/File/BitmapExport/BitmapExport.js:56” Debug: got transaction
Impossible to obtain an png image, and others too. I am on Linux Mint Serena 64B alias Ubuntu Xenial 16.04. Qcad last release:
Version : 3.16.4.4 (3.16.4.4) Internet : QCAD.org Date de fabrication : Jan 26 2017 Révision :
Qt Version : 4.8.7 Architecture : x86_64 Compiler : gcc 5.4.0
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
2 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|
|
1553 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception with circles | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4776
|
|
1554 | QCAD (main) | Bug Report | Low | Auto focus of options toolbar when entering numbers bro ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4774
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|
|
1556 | QCAD (main) | Bug Report | Low | Linux lubuntu - menu doesn't work properly | Closed | |
|
Task Description
This is not the only menu that didn’t work properly: moving the mouse cursor on the lower arrow made the list moving up; but is impossible to make the list moving down when I put the mouse over the upper arrow. The only workaround (time consuming but effective) is to select the first upper paper size: selecting again the menu I can see tha current selection in the second position: I select the one above it; and so on, until I find what I need.
|
|
1557 | QCAD (main) | Bug Report | Low | Zero length lines not shown | Closed | |
|
Task Description
Zero length lines are not shown in QCAD. For best compatibility these should be shown as dots.
|
|
1558 | QCAD (main) | Bug Report | Low | unlayed lines | Closed | |
1 |
Task Description
DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.
|
|
1559 | QCAD (main) | Bug Report | Low | Font substitution in command line tools | Closed | |
|
Task Description
Font substitutions broken for many cases. Font “Standard” can never be substituted.
|
|
1561 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: menu missing (macOS, French ... | Closed | |
|
Task Description
Qt menu heuristic causes Edit > Drawing Preferences to disappear with French locale under macOS.
Edit > Application Preferences and Help > About are moved to erroneous locations as well.
|
|
1562 | QCAD (main) | Bug Report | Low | 3.16.7 MacOS 64bit Crashes on Launch | Closed | |
|
Task Description
Hi, I have just tried updating from 3.16.2 (working) to the latest version 3.16.7 on MacOS Lion 64bit, and the new version crashes immediately on launch.
Here is the Apple problem report: Process: launchd [438] Path: /Applications/QCAD_new_broken.app/Contents/MacOS/QCAD Identifier: org.qcad Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [236]
Date/Time: 2017-03-22 08:28:00.043 +0000 OS Version: Mac OS X 10.7.5 (11G63) Report Version: 9
Interval Since Last Report: 17907473 sec Crashes Since Last Report: 173 Per-App Crashes Since Last Report: 6 Anonymous UUID: A36E8DD9-5A71-4361-9929-92E4633D8136
Crashed Thread: Unknown
Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00007fff5fc01028
Backtrace not available
Unknown thread crashed with X86 Thread State (64-bit):
rax: 0x0000000000000055 rbx: 0x0000000000000000 rcx: 0x0000000000000000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000000 rbp: 0x0000000000000000 rsp: 0x0000000000000000
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000000000000 r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
rip: 0x00007fff5fc01028 rfl: 0x0000000000010203 cr2: 0x00007fff5fc01028
Logical CPU: 1
Binary images description not available
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 498
thread_create: 0
thread_set_state: 0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11 Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020 Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0×87), Atheros 5416: 2.1.14.9 Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5 Serial ATA Device: ST1000LM014-1EJ164, 1 TB Parallel ATA Device: HL-DT-ST DVDRW GWA4080MA USB Device: Built-in iSight, apple_vendor_id, 0×8502, 0xfd400000 / 3 USB Device: hub_device, 0×0424 (SMSC), 0×2514, 0xfd100000 / 2 USB Device: DataTraveler 2.0, 0×0951 (Kingston Technology Company), 0×1665, 0xfd130000 / 6 USB Device: Samsung M3 Portable, 0x04e8 (Samsung Electronics Co., Ltd.), 0x61b6, 0xfd120000 / 5 USB Device: iPod, apple_vendor_id, 0×1209, 0xfd140000 / 4 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0×8205, 0x1a100000 / 2 USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1a200000 / 3 USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021b, 0x5d200000 / 3 USB Device: IR Receiver, apple_vendor_id, 0×8242, 0x5d100000 / 2
|
|
1565 | QCAD (main) | Bug Report | Low | Disappearing blocks. | Closed | |
|
Task Description
Blocks disappear (or their content does) after creating again with the same name. In attached file:
1) Created cirle 2) Select circle, BC, select center, name is ‘testblock’ 3) Repeat 2) – circle is now gone
|
|
1566 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: deleted bl ... | Closed | |
1 |
Task Description
Deleted (undone) block attributes are stored to DXF/DWG.
|
|
1567 | QCAD (main) | Feature Request | Low | Add support for separate window | Assigned | |
2 |
Task Description
Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already. That would help a lot when working on multiple files and copying blocks between.
|
|
1568 | QCAD (main) | Bug Report | Low | Issues: Snaps, Trim, Green selection tool | Closed | |
|
Task Description
Hello,
There is some issues with the snap tool and the selection tool.The trim button only trims some lines but not all.
1. The snap tool does not let me snap to certain things when i select something. For example i will select a box and i will try to extend the corner to another entities corner but the snap is not there so its free and thus not accurate.
2. For some reason the selection tool does not allow me to select certain things. If i have two boxes overlapping and i use the selection tool (from right to left “green selection box”) it does not allow me to select what i want i have to actually click it. This is annoying when it comes to selecting specific things.
3. The trim tool does not work properly.If i want to trim the inside of a cross hair or such, it only allows me to trim the inside of one line and if i try to trim the other it deletes the complete line.
Please fix as soon as possible. Thanks
|
|
1569 | QCAD (main) | Bug Report | Low | File > Print Preview: changing offset in drawing prefer ... | Closed | |
|
Task Description
In print preview mode I click the button for drawing preferences. I go to Printing: Page and change the offset for x,y in the viewport. Then apply but the page has not moved and the autozoom still redirects to the old position. When I redraw the window through the window manager or quit and reopen the printpreview the page has moved to it spot.
|