Properties with title ‘Z’ are not displayed in the property editor. This is correct but should not apply to custom, user defined properties.

Editing redundant properties in the property editor has no effect (e.g. length of line, area of circle, ...)

Entity filter is not applied to combo box type properties.

Drawing Unit: Inch
Label Format: Architectural and Engineering

Note: Info tool calculation is correct.

I just compiled from github master 10dd588243cce87eb9a7c901ebd77c70464bcb94, and discovered that the Property Editor does not display the values of the “Linetype Scale” or the “Draw Order” anymore, even though they were properly displayed in version 3.12.1.0. The gui text boxes allow the values to be edited, it seems, but the current values are still not displayed after entering new values.

Tested on Arch Linux, 64 bit.

Case:

Drawing unit = inch,

Dimension Label Format set to Engineering or Architectural,

Configuration option for property editor:

• if block reference with attributes is selected, filter by block reference
• if block reference with attributes is selected, show all selected entities (no filter)

Entities cannot be added to an invisible layer which is intended.

However, it should be allowed to change the layer in the property editor to an invisible layer.

1. select hatch
2. click “+” in property editor to move selection to new layer
3. enter new layer name
4. OK

• Select text entity
• Right-click on line edit of property ‘Plain Text’
• Insert symbol

1. Select line and arc
2. Set selection filter in property editor to ‘lines’
3. Selection filter combo no longer contains choice for ‘arcs’.

property editor: shift - left / right arrow to select in line edit broken (hot key for next / prev tab)

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

- Create block
- Add attribute with tag “MY_ATTR” - Create block reference

- Select block reference
- Block attribute of block reference shown as “ATTR”

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5544

I was editing a block using the “Edit block in-place” and then (because I was exploring QCad a little) tried the “Purge unused blocks” option. I suspect that the purge removed the block I was editing, since when I now click “Save and close”, I get “Original block not found”. Also when I click “Cancel”, I get “Original block reference data not found”.

Recreating an empty block with the same name fixes this, and “Save and close” seems to work as expected again.

This is probably very much a corner case which is not really important, but I wanted to report it just so it is known.

Put the asterisk in tab title of modified files in front of the name, so it can be seen, when there are so many tabs, that the names will be truncated.

Affects drawings in inch with hatch patterns ISO03W100 and ISO03W100A

Intersection between ellipses are not all detected.

This makes difficult difficult to make the projection as the example I give, where part of ellipses are to be removed betwwen intersection ponts.

QCad 3.0 RC2 on a Mac Leopard 10.5 (MacBook). Everything seems to work OK, but the lower left corner status bar text is in an incredibly tiny font, basically unusable. Same version of QCad on the Bootcamp/XP side of the MacBook is readable.

But I can’t find a preferences setting on either for the font size. On the old version it’s easy to find, but I think it got left out somehow on 3.0.

Had to re-install XUbuntu, now 13.04 64 bit instead of 12.04 32 bit. Now qcad 3.0.0 professional isn’t working any more (bash won’t execute qcad-bin), even after fresh re-install. I tried qcad-3.0.0-prof-linux-alt-x86.tar.gz and qcad-3.0.0-prof-linux-x86.tar.gz downloaded 20.07.2012 (I can not download anything and can not get updates because payment is more than 12 months ago).

XP32/ QCAD 3.0.5

The 3.0.5 Version is very instable - crashes many times in an hour

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe
ModVer: 0.0.0.0 Offset: 00de468d

XP32/ QCAD 3.0.6

The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ...

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll
ModVer: 4.7.4.0 Offset: 0005d1e8

Here’s the output in the console:

Qcad alters color of adjacent text, if certain unicode characters are used.

Version:
3.28.2.0 (3.28.2)
Internet:
QCAD.org
Build Date:
Aug 30 2023
Revision:
a8039fc
Qt Version:
5.13.2
Architecture:
x86_64
Compiler:
MSVC++ 14.0 (2015)

Flytracker appears to have the same problem, as this report was rejected when I inserted the same characters into the title. Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {1,} Failed! (Illegal mix of collations (utf8_unicode_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation ‘like’)

QCad Book

Would be nice to have the index linked (like Bookmarks, Hyperlinks, Jump marks) with the regarding chapter.

So that I just can click in the index what I’m looking for and it jumps directly to the correct chapter.

The QCAD Community Edition isn’t able to read / import dxf files with a German “Umlaut” like ä,ö, ü in the dxf file name.
If I change the file name from a “ä” into a “ae” QCAD CE will open the file flawless.

When multiple superscripts or subscripts are used in a text field, re-opening the saved dxf file will fail to render all but the first super/subscript element. As per attached example. Bug occurs on all Mac OS X from Mavericks onward.

Minimal reproducible steps:
1. Open new document in QCAD
2. Add a text object
3. Make part of the text sub or super-script
4. Make another part of the text also sub/superscript, with at least one ‘normal’ character between the two sub/superscripts
5. Save file and close it. Don’t have to quit QCAD.
6. Reopen the file. Voila, all but the first sub/superscript element is broken.

Dan.

ps. QCAD is a pretty great piece of software, nice work all.

Community version (still on FBSD only), so dxflib. I suspect the culprit is dxflib.

I have created layers and blocks and whatnot with (hungarian) accented characters in their names.
Apparently (according to the Internet, as evidenced probably most glaringly by usa.autodesk.com /adsk/servlet/ps/dl/item?siteID=123112&id=7586582&linkID=9240617) the R15 DXF version assumes single-byte character sets being used. Quick grepping the DXF2000 mentions “String (255-character maximum; less for Unicode strings)” (Group Code Value types), so it may be a false track...

Anyway, the DXF file written does have strings converted to single-byte encoding, but it seems it’s always ANSI-1252. When the output encoder encounters a character that is not representable in this one, it will use a literal question mark.

Actual case, I have a block with the name

106 egypólusú váltókapcsoló jelzőfénnyel

Of this, “ő” (U+0151) is not representable in ANSI-1252, so what gets written to the dxf is (non-ASCII shown in hex)

106 egyp<f3>lus<fa> v<e1>lt<f3>kapcsol<f3> jelz?f<e9>nnyel

Note the literal question mark.

Now the problem is this is an irreversible operation but the result is perfectly valid ANSI-1252, so upon opening the file again, I will get a block named

106 egypólusú váltókapcsoló jelz?fénnyel

IMHO the ideal resolution is to

1. Have a preference for the export code page (and use it, too, circumstances permitting)
2. Iff this is not set (or set to a default “Use system locale to determine” or something), use a look-up table to take a good guess (like old QCAD2 qcadlib/src/engine/rs_system.cpp:QCString RS_System::localeToISO())
3. If the output encoder encounters a character that is not representable in the target code page, throw an error with an option to ignore the error (and keep using question marks, but then this must have been acknowledged by the user so not silent problem anymore), pick a new output code page, whatever else

This all assuming the R15 doesn’t actually depends hardly on ANSI-1252 and ANSI-1252 only. In that case, option #3 would still be nice.

Most Western European languages (and English) are not affected by this as ANSI-1252 has most of them covered, but a little to the east, a little to the south, a little to the north, and it does make a bit of a difference :)

See forum thread at:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2833

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2595

QCAD Community, built from Git HEAD (bf30371), Linux (Ubuntu 18.04 x64), Qt 5.10.1, fresh build on a completely clean, new checkout.

Warning:  QApplication: invalid style override passed, ignoring it.
17:00:05: Debug:    RDxfPlugin::init
17:00:05: Debug:    RScriptsPlugin::init
Warning:  Cannot load translation: "qtbase_en"
Warning:  Cannot load translation: "qt_en"
Warning:  Cannot load translation: "assistant_en"
Warning:  Cannot load translation: "qt_help_en"
Warning:  Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning:  action not found: "Scheme"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
17:00:07: Debug:    "<global>() at 522"

My best guess is this was introduced sometime during last week or thereabouts (i.e. before that, Git HEAD used to work fine).

application crashes as soon as I try to save or save as a drawing - Windows 10

Version :
3.12.6.0 (3.12.6)
Internet :
QCAD.org
Date de fabrication :
Jan 28 2016
Révision :
664eeb0
Qt Version :
5.5.1
Architecture :
x86_64
Compiler :
MSVC++ 12.0 (2013)

Have tried several samples from the web and the result is the same.

Here is the event log entry:
Faulting application name: qcad.exe, version: 3.20.0.0, time stamp: 0x5ad07892
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x000000000006dd27
Faulting process id: 0x34d0
Faulting application start time: 0x01d3dbdf73dc50d2
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: 0644b1d2-d503-4525-ab02-fc36f87288a0
Faulting package full name:
Faulting package-relative application ID:

Please see this downstream bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265989

Hello!
I tried to save attached file (file in R15 dxf format) to any other formats and I got a crash of QCAD 3.4.5 with the next log:

Debug:    RCamScriptsPlugin: init 
Debug:    RDwgPlugin::init: trial 
Debug:    RDxfPlugin::init 
Debug:    RHelpPlugin::init 
Debug:    RProScriptsPlugin::init 
Debug:    TIMER:  56 ms -  "loading add-ons" 
Debug:    TIMER:  617 ms -  "initializing add-ons" 
Debug:    checking for updates... 
Warning:  QSslSocket: cannot resolve SSLv2_client_method
Warning:  QSslSocket: cannot resolve SSLv2_server_method
Debug:    no updates available 
Debug:    checking for updates... 
Debug:    no updates available 
Warning:  KGlobal::locale(): Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
Warning:  Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Warning:  Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Debug:    "/org/freedesktop/UDisks2/drives/ST31000340AS_5QJ0WQPV" : property "Drive" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "Drive" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "DeviceNumber" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "Device" does not exist 
Debug:    "/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist 
Debug:    "/" : property "DeviceNumber" does not exist 
Debug:    "/" : property "Device" does not exist 
Debug:    "/" : property "MediaCompatibility" does not exist 
Debug:    "/" : property "MediaRemovable" does not exist 
Debug:    "/" : property "Removable" does not exist 
Debug:    "/" : property "ConnectionBus" does not exist 
Debug:    code page:  30 
Debug:    RDxfExporter::exportFile 
Debug:    RDxfExporter::exportFile: header 
Debug:    RDxfExporter::exportFile: variables 
Debug:    RDxfExporter::exportFile: tables 
Debug:    RDxfExporter::exportFile: vport 
Debug:    RDxfExporter::exportFile: linetypes 
Debug:    RDxfExporter::exportFile: linetypes table 
Debug:    RDxfExporter::exportFile: linetypes loop 
Debug:    RDxfExporter::exportFile: linetypes table end 
Debug:    RDxfExporter::exportFile: layers 
Debug:    RS_FilterDxf::writeLayer:  "0" 
Debug:    writing styles... 
Debug:    writing views... 
Debug:    writing ucs... 
Debug:    writing appid... 
Debug:    writing dim styles... 
Debug:    writing block records... 
Debug:    writing block record:  "_____ _3 _________ _______" 
Debug:    writing block record:  "*Model_Space" 
Debug:    writing end of section TABLES... 
Debug:    writing blocks... 
Debug:    writing block:  "_____ _3 _________ _______" 
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 24, document: "0xa59ee48", address: "0xd779d30", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(8, 90, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(8, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 25, document: "0xa59ee48", address: "0xa2965f0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  1 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 90, 0) - RVector(20, 90, 0)) )  ) , startPoint: RVector(8, 90, 0), endPoint: RVector(20, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 26, document: "0xa59ee48", address: "0xd5ef410", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  2 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 65, 0) - RVector(20, 65, 0)) )  ) , startPoint: RVector(8, 65, 0), endPoint: RVector(20, 65, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 27, document: "0xa59ee48", address: "0xd7784f0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  3 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 30, 0) - RVector(20, 30, 0)) )  ) , startPoint: RVector(8, 30, 0), endPoint: RVector(20, 30, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 28, document: "0xa59ee48", address: "0xd2c3250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  4 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(13, 5, 0) - RVector(13, 90, 0)) )  ) , startPoint: RVector(13, 90, 0), endPoint: RVector(13, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 29, document: "0xa59ee48", address: "0xa575df8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  5 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 13, 0) - RVector(415, 13, 0)) )  ) , startPoint: RVector(405, 13, 0), endPoint: RVector(415, 13, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 30, document: "0xa59ee48", address: "0xd37d0e8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  6 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 5, 0) - RVector(405, 20, 0)) )  ) , startPoint: RVector(405, 20, 0), endPoint: RVector(405, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 31, document: "0xa59ee48", address: "0xc83cbb0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  7 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(285, 5, 0) - RVector(285, 20, 0)) )  ) , startPoint: RVector(285, 5, 0), endPoint: RVector(285, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 32, document: "0xa59ee48", address: "0xa6f90f8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  8 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(270, 5, 0) - RVector(270, 20, 0)) )  ) , startPoint: RVector(270, 5, 0), endPoint: RVector(270, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 33, document: "0xa59ee48", address: "0xd67d868", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  9 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260, 5, 0) - RVector(260, 20, 0)) )  ) , startPoint: RVector(260, 5, 0), endPoint: RVector(260, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 34, document: "0xa59ee48", address: "0xd984548", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  10 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 7.88608, 0) - RVector(11.7998, 27.1139, 0)) )  ) , alignmentPoint: RVector(11.75, 17.5, 0), position: RVector(11.75, 9.36111, 0), text: "Инв. № подл.", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 35, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  11 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(250, 5, 0) - RVector(250, 20, 0)) )  ) , startPoint: RVector(250, 5, 0), endPoint: RVector(250, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 36, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  12 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 37.5675, 0) - RVector(11.7998, 57.4325, 0)) )  ) , alignmentPoint: RVector(11.75, 47.5, 0), position: RVector(11.75, 39.0556, 0), text: "Подп. и дата", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 37, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  13 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(240, 5, 0) - RVector(240, 20, 0)) )  ) , startPoint: RVector(240, 5, 0), endPoint: RVector(240, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 38, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  14 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 67.82, 0) - RVector(11.7998, 87.18, 0)) )  ) , alignmentPoint: RVector(11.75, 77.5, 0), position: RVector(11.75, 69.2222, 0), text: "Взам. инв. №", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 39, document: "0xa59ee48", address: "0x9a13980", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  15 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(20, 292, 0) - RVector(415, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(20, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(415, 5, 0)) ,  RBox(RVector(415, 5, 0) - RVector(415, 292, 0)) )  ) RPolyline(RShape(address: "0x9a139d0"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(415, 292, 0), endPoint: RVector(20, 292, 0)), 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(20, 292, 0), endPoint: RVector(20, 5, 0)), 
RLine(RShape(address: "0xd987298"), startPoint: RVector(20, 5, 0), endPoint: RVector(415, 5, 0)), 
RLine(RShape(address: "0xa2d31b0"), startPoint: RVector(415, 5, 0), endPoint: RVector(415, 292, 0)), ))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 40, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  16 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(20, 5, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(20, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 41, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  25 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  17 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 15, 0) - RVector(295, 15, 0)) )  ) , startPoint: RVector(295, 15, 0), endPoint: RVector(230, 15, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 42, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  18 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 10, 0) - RVector(295, 10, 0)) )  ) , startPoint: RVector(295, 10, 0), endPoint: RVector(230, 10, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 43, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  19 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(231, 5.85618, 0) - RVector(236, 8.1, 0)) )  ) , alignmentPoint: RVector(231, 7, 0), position: RVector(228.472, 7, 0), text: "Изм.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 44, document: "0xa59ee48", address: "0xa98c480", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  20 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(0, 0, 0) - RVector(420, 0, 0)) ,  RBox(RVector(420, 0, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 297, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 0, 0) - RVector(0, 297, 0)) )  ) RPolyline(RShape(address: "0xa98c4d0"), vertices: 4, closed: true, 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(0, 0, 0), endPoint: RVector(420, 0, 0)), 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(420, 0, 0), endPoint: RVector(420, 297, 0)), 
RLine(RShape(address: "0x9be2218"), startPoint: RVector(420, 297, 0), endPoint: RVector(0, 297, 0)), 
RLine(RShape(address: "0x9c0c3e0"), startPoint: RVector(0, 297, 0), endPoint: RVector(0, 0, 0)), ))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 45, document: "0xa59ee48", address: "0x9a0ea88", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  21 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 5, 0) - RVector(230, 20, 0)) ,  RBox(RVector(230, 20, 0) - RVector(415, 20, 0)) )  ) RPolyline(RShape(address: "0x9a0ead8"), vertices: 3, closed: false, 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(230, 5, 0), endPoint: RVector(230, 20, 0)), 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(230, 20, 0), endPoint: RVector(415, 20, 0)), ))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 46, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  22 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(241, 5.24, 0) - RVector(249.534, 8.1, 0)) )  ) , alignmentPoint: RVector(241, 7, 0), position: RVector(236.639, 7, 0), text: "Кол.уч.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 47, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  23 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(251.956, 5.9, 0) - RVector(258.044, 8.1, 0)) )  ) , alignmentPoint: RVector(255, 7, 0), position: RVector(251.944, 7, 0), text: "Лист", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 48, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  24 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(295, 5, 0) - RVector(295, 20, 0)) )  ) , startPoint: RVector(295, 5, 0), endPoint: RVector(295, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 49, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  25 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260.677, 5.85618, 0) - RVector(269.323, 8.1, 0)) )  ) , alignmentPoint: RVector(265, 7, 0), position: RVector(260.861, 7, 0), text: "№ док.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 50, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  26 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(272.414, 5.90284, 0) - RVector(282.565, 8.14667, 0)) )  ) , alignmentPoint: RVector(277.49, 7.04667, 0), position: RVector(272.323, 7.04667, 0), text: "Подпись", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 51, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  27 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(286.669, 5.68, 0) - RVector(293.331, 8.1, 0)) )  ) , alignmentPoint: RVector(290, 7, 0), position: RVector(286.556, 7, 0), text: "Дата", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 52, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  28 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(406.541, 14, 0) - RVector(413.459, 16.5, 0)) )  ) , alignmentPoint: RVector(410, 14, 0), position: RVector(406.944, 14, 0), text: "Лист", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    writing block:  "*Model_Space" 
Debug:    writing section ENTITIES... 
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 54, document: "0xa59ee48", address: "0xa788310", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  30 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(-182, -97.5, 0) - RVector(238, 199.5, 0)) )  ) , position: RVector(-182, -97.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 55, document: "0xa59ee48", address: "0xd97ffb8", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  31 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(340, -88.5, 0) - RVector(760, 208.5, 0)) )  ) , position: RVector(340, -88.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    writing end of section ENTITIES... 
Debug:    writing section OBJECTS... 
Debug:    writing end of section OBJECTS... 
Debug:    writing EOF... 
Debug:    RDxfExporter::exportFile: close 
Debug:    RDxfExporter::exportFile: delete 
Debug:    RDxfExporter::exportFile: OK 
Debug:    RDxfExporter::exportFile 
Debug:    RDxfExporter::exportFile: header 
Debug:    RDxfExporter::exportFile: variables 
Debug:    RDxfExporter::exportFile: tables 
Debug:    RDxfExporter::exportFile: vport 
Debug:    RDxfExporter::exportFile: linetypes 
Debug:    RDxfExporter::exportFile: linetypes table 
Debug:    RDxfExporter::exportFile: linetypes loop 
Debug:    RDxfExporter::exportFile: linetypes table end 
Debug:    RDxfExporter::exportFile: layers 
Debug:    RS_FilterDxf::writeLayer:  "0" 
Debug:    writing styles... 
Debug:    writing views... 
Debug:    writing ucs... 
Debug:    writing appid... 
Debug:    writing dim styles... 
Debug:    writing block records... 
Debug:    writing block record:  "_____ _3 _________ _______" 
Debug:    writing block record:  "*Model_Space" 
Debug:    writing end of section TABLES... 
Debug:    writing blocks... 
Debug:    writing block:  "_____ _3 _________ _______" 
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 24, document: "0xa59ee48", address: "0xd30fef0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(8, 90, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(8, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 25, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  1 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 90, 0) - RVector(20, 90, 0)) )  ) , startPoint: RVector(8, 90, 0), endPoint: RVector(20, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 26, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  2 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 65, 0) - RVector(20, 65, 0)) )  ) , startPoint: RVector(8, 65, 0), endPoint: RVector(20, 65, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 27, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  3 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 30, 0) - RVector(20, 30, 0)) )  ) , startPoint: RVector(8, 30, 0), endPoint: RVector(20, 30, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 28, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  4 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(13, 5, 0) - RVector(13, 90, 0)) )  ) , startPoint: RVector(13, 90, 0), endPoint: RVector(13, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 29, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  5 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 13, 0) - RVector(415, 13, 0)) )  ) , startPoint: RVector(405, 13, 0), endPoint: RVector(415, 13, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 30, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  6 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 5, 0) - RVector(405, 20, 0)) )  ) , startPoint: RVector(405, 20, 0), endPoint: RVector(405, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 31, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  7 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(285, 5, 0) - RVector(285, 20, 0)) )  ) , startPoint: RVector(285, 5, 0), endPoint: RVector(285, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 32, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  8 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(270, 5, 0) - RVector(270, 20, 0)) )  ) , startPoint: RVector(270, 5, 0), endPoint: RVector(270, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 33, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  9 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260, 5, 0) - RVector(260, 20, 0)) )  ) , startPoint: RVector(260, 5, 0), endPoint: RVector(260, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 34, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  10 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 7.88608, 0) - RVector(11.7998, 27.1139, 0)) )  ) , alignmentPoint: RVector(11.75, 17.5, 0), position: RVector(11.75, 9.36111, 0), text: "Инв. № подл.", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 35, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  11 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(250, 5, 0) - RVector(250, 20, 0)) )  ) , startPoint: RVector(250, 5, 0), endPoint: RVector(250, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 36, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  12 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 37.5675, 0) - RVector(11.7998, 57.4325, 0)) )  ) , alignmentPoint: RVector(11.75, 47.5, 0), position: RVector(11.75, 39.0556, 0), text: "Подп. и дата", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 37, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  13 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(240, 5, 0) - RVector(240, 20, 0)) )  ) , startPoint: RVector(240, 5, 0), endPoint: RVector(240, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 38, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  14 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 67.82, 0) - RVector(11.7998, 87.18, 0)) )  ) , alignmentPoint: RVector(11.75, 77.5, 0), position: RVector(11.75, 69.2222, 0), text: "Взам. инв. №", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 39, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  15 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(20, 292, 0) - RVector(415, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(20, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(415, 5, 0)) ,  RBox(RVector(415, 5, 0) - RVector(415, 292, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a0fe10"), startPoint: RVector(415, 292, 0), endPoint: RVector(20, 292, 0)), 
RLine(RShape(address: "0xd497720"), startPoint: RVector(20, 292, 0), endPoint: RVector(20, 5, 0)), 
RLine(RShape(address: "0x99fd1a8"), startPoint: RVector(20, 5, 0), endPoint: RVector(415, 5, 0)), 
RLine(RShape(address: "0x9a10628"), startPoint: RVector(415, 5, 0), endPoint: RVector(415, 292, 0)), ))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 40, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  16 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(20, 5, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(20, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 41, document: "0xa59ee48", address: "0xd3703e0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  25 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  17 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 15, 0) - RVector(295, 15, 0)) )  ) , startPoint: RVector(295, 15, 0), endPoint: RVector(230, 15, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 42, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  18 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 10, 0) - RVector(295, 10, 0)) )  ) , startPoint: RVector(295, 10, 0), endPoint: RVector(230, 10, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 43, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  19 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(231, 5.85618, 0) - RVector(236, 8.1, 0)) )  ) , alignmentPoint: RVector(231, 7, 0), position: RVector(228.472, 7, 0), text: "Изм.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 44, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  20 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(0, 0, 0) - RVector(420, 0, 0)) ,  RBox(RVector(420, 0, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 297, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 0, 0) - RVector(0, 297, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a044c0"), startPoint: RVector(0, 0, 0), endPoint: RVector(420, 0, 0)), 
RLine(RShape(address: "0x99fd1a8"), startPoint: RVector(420, 0, 0), endPoint: RVector(420, 297, 0)), 
RLine(RShape(address: "0x9a0fe10"), startPoint: RVector(420, 297, 0), endPoint: RVector(0, 297, 0)), 
RLine(RShape(address: "0x9a10628"), startPoint: RVector(0, 297, 0), endPoint: RVector(0, 0, 0)), ))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 45, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  21 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 5, 0) - RVector(230, 20, 0)) ,  RBox(RVector(230, 20, 0) - RVector(415, 20, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 3, closed: false, 
RLine(RShape(address: "0x9a11a90"), startPoint: RVector(230, 5, 0), endPoint: RVector(230, 20, 0)), 
RLine(RShape(address: "0xa6ffd58"), startPoint: RVector(230, 20, 0), endPoint: RVector(415, 20, 0)), ))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 46, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  22 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(241, 5.24, 0) - RVector(249.534, 8.1, 0)) )  ) , alignmentPoint: RVector(241, 7, 0), position: RVector(236.639, 7, 0), text: "Кол.уч.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 47, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  23 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(251.956, 5.9, 0) - RVector(258.044, 8.1, 0)) )  ) , alignmentPoint: RVector(255, 7, 0), position: RVector(251.944, 7, 0), text: "Лист", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 48, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  24 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(295, 5, 0) - RVector(295, 20, 0)) )  ) , startPoint: RVector(295, 5, 0), endPoint: RVector(295, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 49, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  25 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260.677, 5.85618, 0) - RVector(269.323, 8.1, 0)) )  ) , alignmentPoint: RVector(265, 7, 0), position: RVector(260.861, 7, 0), text: "№ док.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 50, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  26 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(272.414, 5.90284, 0) - RVector(282.565, 8.14667, 0)) )  ) , alignmentPoint: RVector(277.49, 7.04667, 0), position: RVector(272.323, 7.04667, 0), text: "Подпись", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 51, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  27 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(286.669, 5.68, 0) - RVector(293.331, 8.1, 0)) )  ) , alignmentPoint: RVector(290, 7, 0), position: RVector(286.556, 7, 0), text: "Дата", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 52, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  28 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(406.541, 14, 0) - RVector(413.459, 16.5, 0)) )  ) , alignmentPoint: RVector(410, 14, 0), position: RVector(406.944, 14, 0), text: "Лист", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    writing block:  "*Model_Space" 
Debug:    writing section ENTITIES... 
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 54, document: "0xa59ee48", address: "0x9a02c98", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  30 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(-182, -97.5, 0) - RVector(238, 199.5, 0)) )  ) , position: RVector(-182, -97.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 55, document: "0xa59ee48", address: "0x9a02c98", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  31 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(340, -88.5, 0) - RVector(760, 208.5, 0)) )  ) , position: RVector(340, -88.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    writing end of section ENTITIES... 
Debug:    writing section OBJECTS... 
Debug:    writing end of section OBJECTS... 
Debug:    writing EOF... 
Debug:    RDxfExporter::exportFile: close 
Debug:    RDxfExporter::exportFile: delete 
Debug:    RDxfExporter::exportFile: OK 
./qcad-3.4.5-linux-x86_32/qcad: line 18: 12988 segmantation fault                   LD_LIBRARY_PATH="$DIR" "$binary" -style plastique "$@"

Andrew,

Related topic:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=10562

From the looks of it the cursor image data is read at a wider pace as it is stored.
One can distinguish the double cross positioning QCAD cursor but it is shifted.

Regards,
CVH

Hello
Qcad does not show! DWF-files. it seems, that the File is opened, but thre is nothing displayed on the screen. onl the Rastes is showed, but not the DWf-drawing.

I just downloaded QCAD and bought the doc that goes with it. Lo and behold, I find that I cannot search the doc in Preview (Acrorbat Reader too!)! So I paid extra for doc that might be argued should come with a product (although its hard to complain about the price) and then I cannot even search it electronically? There is just everything wrong with that in the year 2014! Please fix as it is extremely inefficient and time consuming to not have electronic search capability.

indows10 QCAD3.28.2
I display different fonts in three different CAD software. QCAD displays incorrectly (text display width is incorrect). The attachment is three different CAD display effects. The red mark is where QCAD displays errors.

QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page.
(Menu → Help → FAQ‘s (Online))

Arch Linux x86_64 (up to date Nov 2022)
System Qt version: 5.15.7
Qcad Pro 3.27.8 64-bit

The ‘standard’ Linux installer for Qcad Pro 3.27.8 (qcad-3.27.8-pro-linux-x86_64.run) dumps core on either of the following actions:

- Help/’Check for Updates’

- File/Save As...

However, installing the ‘qcad-3.27.8-pro-linux-qt5.14-x86_64.run’ version built against a more recent version of Qt (as of Nov 2022) does not display these issues.

I am leaving this here in case it is helpful to other users.

Hi I am having an issue with the attached DWG file, when I try to open the file qcad opens then immediately crashes and I am unable to do anything.

Here is the event viewer log:

Faulting application name: qcad.exe, version: 3.21.3.0, time stamp: 0x5b9fbdd3
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x0000000000074a30
Faulting process id: 0x1ad8
Faulting application start time: 0x01d48bbf05480557
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: fa661b18-d0df-41a8-88e9-37c2ea345bcb
Faulting package full name:
Faulting package-relative application ID:

Description:
QCAD quits when trying to insert a library item (PC_1kW.dxf) from the library browser. Both by dragging it or clicking on insert.
Joined a copy of the terminal and dmesg (Linux) and what I found on the windows logs.

- Tested with other libraries elements of the same origin with the same result.
- The file opens normally in QCAD. When you create a block from it, you can re-insert it and it works as expected, try with PC_1kWblock.dxf...
- If you re-create a library item from the file with another name it fails also to insert.
- Tested with a new empty file or with a file containing same blocks...

Now the strange part:

-On a brand new HP Zbook 14u G6 it works flawlessly on Windows but fails on Linux... That was the first computer I tried (with Windows) when I decided that it will replace Draftsight... I was lucky...
-On a 4 years old Lenovo Yoga 14 it fails both on Linux & Windows... This computer has only 8Gb of RAM, but dedicated graphics...
-On a customer’s HP Pavillon 17’’ it fails... He bought a licence & Book of QCAD because of me...
-On my Dell 7720 it fails both on Windows and Linux. This workstation has everything to run any CAD software (64Gb RAM, Xeon 1535M v6, Quadro P5000)
-Reinstallation of the software doesn’t solve the problem. 2 independent sources tested (my download and my customer’s download)

These blocks have a lot of attributes on different layers, needed for the intended usage. I’m developping a script to extract them to a CSV file based on a template file... As on Draftsight.

Looks a lot like  FS#1938 ... But now you have files to test...

I made further testings and this bug is definitely related to the fact that the attributes definitions are on different layers...

If the layer definition exists before the library items is inserted, it works as expected.

If one layer existing in the item definition is missing from the layer list before the item is inserted it fails.

If you create a block from an instance of the library item, and create a new library item with the block, then it can be inserted without problems and the layers are created... But you must explode it first to access the attributes which is not the idea behind the block attributes that should be editable when a block with attributes is inserted.

So at the moment the only way to work is to start with a template document with all the possible layers on which attributes definitions are defined...

Can’t go further in debugging as block attributes are one of the feature of the ‘professional’ version I paid for and are not open source...

Ready and willing to sign a NDA to get access to the sources and make this work if nobody else takes care of this.

QCad quits when you double-click a text; What’s wrong, QCad or file?

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

The QCAD scripts, that contain a great deal of functionality in the QCAD framework, are so to say open source, in the limited, still powerful, sense that they can be read, inspected and single-handedly adapted to local needs. Wouldn’t it make sense to store these in a public source code repository?

So to allow closer tracking of development, eg. Of course, all of the scripts would then have to know which release of the /kernel/ they require as a support. But that should be a good thing anyways, as soon as a community of framework users arises, wasn’t it?

I installed the professional edition of QCAD 3.0 on a fresh OpenSUSE 12.1/x86_64 system. After installing the 32bit freeglut (freeglut-32bit-100529-8.1.2.x86_64) package, the application still won’t start and fails with a sefault :

/opt/qcad-3.0.0-prof-linux-x86> ./qcad
./qcad : line 38 : 5843 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” $OPT1 $OPT2 “$@”

/opt/qcad-3.0.0-prof-linux-x86> LD_LIBRARY_PATH=. ./qcad-bin -style plastic
Segmentation fault

Here is a gdb backtrace, hoping that it may help diagnose the problem :
(gdb) bt
#0 0x09af5d81 in ?? ()
#1 0xf4b2ddbf in FT_Has_PS_Glyph_Names () from /usr/lib/libfreetype.so.6
#2 0xf4babe44 in ?? () from /usr/lib/libfontconfig.so.1
#3 0xf4bac91e in FcFreeTypeCharSetAndSpacing () from /usr/lib/libfontconfig.so.1
#4 0xf4badf53 in FcFreeTypeQueryFace () from /usr/lib/libfontconfig.so.1
#5 0xf4bae654 in FcFreeTypeQuery () from /usr/lib/libfontconfig.so.1
#6 0xf4ba9509 in ?? () from /usr/lib/libfontconfig.so.1
#7 0xf4ba987d in ?? () from /usr/lib/libfontconfig.so.1
#8 0xf4ba9a57 in ?? () from /usr/lib/libfontconfig.so.1
#9 0xf4ba59d1 in ?? () from /usr/lib/libfontconfig.so.1
#10 0xf4ba5c86 in FcConfigBuildFonts () from /usr/lib/libfontconfig.so.1
#11 0xf4baebac in FcInitLoadConfigAndFonts () from /usr/lib/libfontconfig.so.1
#12 0xf4baee1d in FcInit () from /usr/lib/libfontconfig.so.1
#13 0xf53537e1 in qt_init(QApplicationPrivate*, int, _XDisplay*, unsigned long, unsigned long) ()

 from ./libQtGui.so.4

#14 0xf52d5db8 in QApplicationPrivate::construct(_XDisplay*, unsigned long, unsigned long) ()

 from ./libQtGui.so.4

#15 0xf52d649a in QApplication::QApplication(int&, char**, bool, int) () from ./libQtGui.so.4
#16 0x08b59746 in ?? ()
#17 0x08171cd6 in ?? ()
#18 0xf4bf6003 in __libc_start_main () from /lib/libc.so.6
#19 0×08171701 in ?? ()
Backtrace stopped: Not enough registers or memory available to unwind further

libfreetype installed version is libfreetype6-32bit-2.4.7-6.1.x86_64

after a few minutes 15min the application failed and it closes down!

Naam van toepassing met fout: qcad.exe, versie: 0.0.0.0, tijdstempel: 0x54be6afa
Naam van module met fout: MSVCR100.dll, versie: 10.0.30319.1, tijdstempel: 0x4ba1dbbe
Uitzonderingscode: 0xc0000005
Foutmarge: 0x00010a85
Id van proces met fout: 0x5f8
Starttijd van toepassing met fout: 0x01d039396e5ddd89
Pad naar toepassing met fout: C:\Program Files (x86)\QCAD\qcad.exe
Pad naar module met fout: C:\Program Files (x86)\QCAD\MSVCR100.dll
Rapport-id: 80645c3c-a559-11e4-825a-fcaa1428aee5
Volledige pakketnaam met fout:
Relatieve toepassings-id van pakket met fout: