QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 2025 QCAD/CAMBug ReportLow Set Nesting Quantity shows wrong quantity Closed
100%
Task Description

If I set “Set Nesting Quantity” to e.g. 5 it will remember this number within the session.
If I need to check which number I’ve used last time there is no way to find the actual used value - it will show me always 1.
If I restart QCAD/CAM the value is completely lost and the nesting tool tries to fit in as much as possible into the sheet - regardless that the quantity number still shows one.

It would be nice to have a remember function even after restarting QCAD/CAM and have some kind of possibility to see the last used value.

 2028 QCAD/CAMBug ReportLow CAM > CAM Export: Fails for new document created Closed
100%
Task Description

1. Load drawing
2. Create new drawing
3. Add toolpath / tool
4. CAM > CAM Export

Fails to identify current config (post processor).

 2033 QCAD/CAMBug ReportLow Repeated warning message while updating toolpath Closed
100%
Task Description

While updating or regenerating toolpath on the attached dxf file I repeatedly get the warning message in the attached jpg file. If I keep clicking OK then the toolpath is successfully generated. This did not happen in version 3.23.0 with the same file.

 2055 QCAD/CAMBug ReportLow RTF text formatting not supported Closed
100%
Task Description

If any text in a dxf file use RTF formatting for their fonts, the RTF code is not decoded and the text ends up showing the entire RTF code instead of just the intended text.
Most other editors (Draftsight, Autocad, Powerdraft) support the RTF codes which makes importing files from those editors problematic. See attached file for an example.

 2079 QCAD/CAMBug ReportLow Full screen mode (F11) - Menu / drop down menus not wor ...Closed
100%
Task Description

https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7269

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

 2232 QCAD/CAMBug ReportLow Nesting fails when parts fit plus minus null on sheets Closed
100%
Task Description

Just lost a detailed report (token?)- now a short version!

Nesting fails when parts fit plus minus null on sheets. My parts should fit regarding to the measurements on a sheet multiple times. The nesting tool can’t find a solution.

Options are:
Quantity multiplier: 0
Rotation: 4
Sheet margin: 0
Margin: 0
Tolerance: 0

If I modify the parts and make them slightly smaller then a nesting is done as expected. Did I miss something?

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

 2234 QCAD/CAMBug ReportLow CAM > Nesting: Cancel button not working Closed
100%
Task Description

Clicking cancel button only hides dialog but does not stop nesting. Escape key works as expected.

 2241 QCAD/CAMBug ReportLow CAM Simulation: stops working after closing a file Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=8449

 2250 QCAD/CAMBug ReportLow CAM > Add Profile Toolpath: lead out type / size not sa ...Closed
100%
Task Description

Lead out type and size are not respected (signals blocked and not unblocked).

 2265 QCAD/CAMBug ReportLow QCAD/CAM: startup crash if disabling hierarchical layer ...Closed
100%
Task Description

QCAD/CAM 3.26.4 crashes at startup (just disappears) if setting “EnableHierarchicalLayers” to “false” in QCAD3.ini (Section: [LayerListPro]) on Windows.
Tested fresh installs on several computers, including Windows 10, 7, XP. 32 Bit and 64 Bit OS and QCAD/CAM.
After removing “EnableHierarchicalLayers” or setting “true” QCAD/CAM starts up normally.

So user without knowledge of finding/editing .ini-file will lock himself out by disabling “Application Preferences > Widgets > Layer List > Enable Hierarchical Layers”

 998 QCAD/CAMBug ReportVery Low Grounded 0 recursive block references in blocks: Closed
100%
Task Description

I open anyting file dxf, the message pop-up : Grounded 0 recursive block references in blocks:

 1324 QCAD/CAMSuggestionVery Low Confusing Copy / Move option Closed
100%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

 1369 QCAD/CAMBug ReportVery Low qcad-bin is trying to access non-existent /home/andrew Closed
100%
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

 1799 QCAD/CAMBug ReportVery Low Postprocessor: sign not forced for negative values roun ...Closed
100%
Task Description

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

 1941 Snapshot ReleaseBug ReportLow Invisible layers displayed Closed
100%
Task Description

Snapshot release 3.23.0.2

See also:
https://qcad.org/rsforum/viewtopic.php?p=24757

 1998 Snapshot ReleaseBug ReportLow Viewport: Dimension text not scaled correctly in scaled ...Closed
100%
Task Description

Hi,

Dimensions texts are not showing in layouts when using a Viewport scale of 1/100.
This issue is present in 3.23.0.6 but not in 3.23.0.

See this thread on the forum for more info and repro file:
https://qcad.org/rsforum/viewtopic.php?f=33&t=6725

 23 TestsBug ReportHigh Fix UiTests Closed
100%
Task Description

Fix UiTests

 30 TestsFeature RequestHigh UiTests: update required file Closed
100%
1 Task Description

add “update required file” to the context menu shown in the result window

  1. copy the actual file to the directory “required”
  2. run the test again
  3. test result should be “passed” now
 27 TestsFeature RequestLow Dimension Tests Closed
100%
Task Description
  • add test for all kind of dimensions
 69 TestsFeature RequestLow example file generator Closed
100%
Task Description

example file generator: adjust the print settings automatically, so the example file can be immediately printed to the chosen paper format / orientation without having to adjust the scale / offset

 567 TestsTaskLow rose Closed
100%
Task Description

http://www.askweddingdress.net bridesmaid dresses under $200 sensibility. Designers have even strap matte dealing with for worry of slaying the dial even a shimmer of honor. Obsessed with valuables you must no skip! Cartier parrot ornamental enamel watches http://www.askweddingdress.net wedding dresses , colossal dial having a black blue http://www.askweddingdress.net crochet beach dress , mild blue and darkish green, forming adjacent hue examine, the diploma of tiny district sensible will be the reaching contact yellow, http://www.askweddingdress.net cheap short prom dresses the whole display all of a sudden to existence, features a elegance consciousness http://www.askweddingdress.net cheap dress clothes . colours with 5 guidelines: using the union of colour, make-up rolex, http://www.askweddingdress.net formal beach wedding dresses , dim, white, grey and further intermediate colours, hue gradient colour colour cellular place, and so on. http://www.askweddingdress.net/cocktail-dresses.html vintage cocktail dresses , the emulating five colour rule makes it possible for us to match the colour of daily existence gets easy and explicit. tone colour http://www.askweddingdress.net maxi summer dresses http://www.askweddingdress.net discount bridesmaid dresses : with much more than 3 colours far more lively attain

 568 TestsTaskLow Melissa Closed
100%
Task Description

prince to possess a content existence permanently. http://www.askweddingdress.net fuchsia bridesmaid dresses http://www.askweddingdress.net mermaid wedding dresses a bride want a best marriage ceremony dresses for church marriage ceremony, http://www.askweddingdress.net prom evening dresses she need to decide on outside and informal marriage ceremony dresses,Therefore the halter strap neckline seaside wedding ceremony dresses on-line are outstanding option. seaside wedding ceremony dresses cabin and about the refuge a location that gives accommodation quickly for that friends from your nearby men and women obviously will need an individual somewhat some kindness http://www.askweddingdress.net vintage dresses new york http://www.askweddingdress.net cocktail dress cheap , cabin beneath thirty many years outdated and rocks the home of white stone that Warung or stand It’s also utilized, comfortable drinks, beer, fruit juices http://www.askweddingdress.net/cocktail-dresses.html vintage cocktail dresses http://www.askweddingdress.net plus size dresses http://www.askweddingdress.net petite wedding gowns http://www.askweddingdress.net vintage prom dresses . Balangan the tea duration seaside wedding ceremony dresses property, the wedding ceremony few standing within the bed room about eighteen many years previous, desire to expertise remaining inside a villa Rosanzerusujoya

 569 TestsTaskLow murphy Closed
100%
Task Description

later on phase http://www.askweddingdress.net bridal evening dresses . five. http://www.askweddingdress.net maternity wedding gowns If you’re currently conscious in the quantity of one’s company who will likely be attending consult about discounted space prices, or other close by appropriate accommodation for them. http://www.askweddingdress.net beach wedding dresses cheap six. http://www.askweddingdress.net informal wedding dresses cheap If a wedding ceremony package deal is getting provided question no matter whether there’s any versatility within the checklist as a way to personalize the occasion to fit your needs or if it’s a mounted deal without any alterations permitted http://www.askweddingdress.net cheap bridesmaid dresses http://www.askweddingdress.net wedding gowns bridesmaid dresses . seven. Inquire concerning the amenities offered in the venue or inside the instant region and for anyone who is preparing to benefit from any of those what fees are concerned and in the event the venue can organize these in your behalf. eight http://www.askweddingdress.net cheap plus size bridesmaid dresses http://www.askweddingdress.net/prom-dresses.html beach brides dresses . Verify the climate ailments for that time of calendar year and time of day in the venue. If you’re preparing an http://www.askweddingdress.net inexpensive bridal dresses

 570 TestsTaskLow gary Closed
100%
Task Description

look at, http://www.askweddingdress.net tea length wedding dresses don’t blindly look for huge http://www.askweddingdress.net plus sizes cocktail dresses http://www.askweddingdress.net/evening-dresses.html long sleeve wedding gowns , and can harm the all round perception of stability http://www.askweddingdress.net formal wedding dresses cheap , http://www.askweddingdress.net classic summer dresses just the reverse http://www.askweddingdress.net flower girl dresses . For a few complicated patek philippe watches attributes the excellent embodies the knowledge with the human hand, but when a view you should dial to make exaggerated capacity to invest plenty of eyes appear obvious and distinct around the time, http://www.askweddingdress.net large size bridesmaid dresses around the opposite towards the intention in the timing in the look at. And, to get a observe dial is actually a complicated, typically call for a really formal or incredibly daring with clothes to match http://www.askweddingdress.net mother of the bride dresses , so if you are not a lot gold loved ones, http://www.askweddingdress.net informal beach wedding dresses not per day to get a observe for that requirements of the fit or perhaps a easy dial with a lot more Patek philippe observe for every day check out. Getting this superb look at normally indicates you happen to

 571 TestsTaskLow Blake Closed
100%
Task Description

industry for any marriage ceremony band that will stand the check of time http://www.askweddingdress.net beach prom dresses , or perhaps a bit of style jewellery that may create a long lasting impression, http://www.askweddingdress.net cocktail dress plus size the topic of tungsten carbide rings swiftly will come up http://www.askweddingdress.net short beach dresses http://www.askweddingdress.net inexpensive summer dresses . http://www.askweddingdress.net chian beach dresses Tungsten carbide marriage ceremony rings have develop into additional and additional preferred for a lot of reputable causes; http://www.askweddingdress.net/flower-girl-dresses.html white flower girl dresses nonetheless, just like all factors in existence they might not be for absolutely everyone http://www.askweddingdress.net mini wedding gowns . These guidlelines concerning the advantages and disadvantages of tungsten rings really should enable you to to ascertain if a wonderful tungsten marriage ceremony band will be the great match for you personally, or in case you may well uncover a greater match having a much more classic piece http://www.askweddingdress.net white bridesmaid dresses . http://www.askweddingdress.net cheap dresses The primary factor to understand about tungsten rings is the fact that in addition to

 572 TestsTaskLow Dylan Closed
100%
Task Description

http://www.askweddingdress.net black dresses http://www.askweddingdress.net discount bridesmaid dresses hour markers arms. Apart from some time indicator, this timepiece also contains a date indicator discovered on three o’clock. This look at can also be created to become appropriate for diving with its 300 meters h2o resistance. http://www.askweddingdress.net informal beach wedding dresses Although it could absence a chronograph http://www.askweddingdress.net orange bridal dresses , this really is nonetheless definitely an incredible view to get underwater http://www.askweddingdress.net/evening-dresses.html vintage gowns dress . You’ll be able to get this Longines Hydro Conquest for an approximate cost of $1 http://www.askweddingdress.net cheap dresses under http://www.askweddingdress.net formal wedding dresses cheap ,a hundred and fifty.Longines Women Diamond ConquestThe new Longines Girls Diamond Conquest quartz observe helps make the sporty timekeeper a bit little bit additional female in design, whilst preserving the robustness on the unique, nondecorated see.Developing this edition with the look at, Longines employed the timeproven recipe: to create a dressier edition of the sporty view, just just take an current design and adorn it with diamonds.As an icing within the cake, the http://www.askweddingdress.net cheap long evening dresses http://www.askweddingdress.net plus evening dresses

 573 TestsTaskLow Devin Closed
100%
Task Description

conducive to host presentations and video clip http://www.askweddingdress.net plus size beach wedding dresses , photography shooting , http://www.askweddingdress.net plus size dresses leaving a lovely second. additional affordable wedding ceremony dresses on 1luckybride 1 reader asks: What exactly are all of the legal actions and the way do you go about receiving your title altered? Is there an inventory of other things which has to alter, http://www.askweddingdress.net bridal gown dresses like your financial institution accounts, http://www.askweddingdress.net short brides dresses charge cards, insurance coverage, and so on http://www.askweddingdress.net brides mothers dresses http://www.askweddingdress.net bridal bridesmaid dresses .? I used to be gonna start into the best way to go about this when I recognized we’ve an intensive post on “How To Alter Your Surname Whenever you Get Married”on our weddings web page http://www.askweddingdress.net muslim wedding dresses . Study it it is useful! 1 factor to become conscious of, specifically in case your honeymoon is not using location appropriate following the marriage ceremony: http://www.askweddingdress.net vintage short dresses Ensure your identify lines up on all of the paperwork necessary to journey. As an example, your driver’s license http://www.askweddingdress.net/evening-dresses.html vintage gowns dress

 1633 ThemesBug ReportLow Scrollbar in dark theme Closed
100%
Task Description

The scrollbar in the dark theme remains visible when there are many levels. For example, it blocks some operations such as unlocking or blocking individual levels after you have blocked all levels.

513TranslationBug ReportLowTranslation errorsAssigned
0%
Task Description

If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org.
Vielen Dank für Ihre Hilfe!

Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org.
Merci pour votre aide!

Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org.
Gracias por tu ayuda!

Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org.
Obrigado por sua ajuda!

Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org.
Obrigado pela sua ajuda!

Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org.
Bedankt voor uw hulp!

 539 TranslationBug ReportLow No translations in linux installer Closed
100%
Task Description

Installing QCAD 3 RC5 under Linux using the .bin installer leads to an English only installation.

 1025 TranslationBug ReportLow Selection Filter / German translation Closed
100%
Task Description

The German translation isn’t shown in all parts of the Selection Filter.

 1057 TranslationTaskLow Japanese translation missing in a couple spots .... Closed
100%
Task Description

Is the Japanese translation still in progress or is this a update Problem?

 1058 TranslationBug ReportLow Benutzerreferenz, anstatt skaliert wurde rotiert verwen ...Closed
100%
Task Description

In der Benutzerreferenz für Skalieren wurde irrtümlich das Wort “rotiert” anstatt “skaliert” verwendet

 1136 TranslationBug ReportLow Selection filter: property list not translated Closed
100%
Task Description

QCAD Pro / Deutsch

Selektionsfilter:
Eigenschaft / Auswahlliste wird nicht in Deutsch angezeigt.

 1148 TranslationBug ReportLow Äquidistante: "Polyline" instead of "Polzlinie" Closed
100%
Task Description

Äquidistante:
Spelling correction: “Polyline” instead of “Polzlinie” ... ;-)

 1188 TranslationBug ReportLow A few missing translations for the German Interface Closed
100%
Task Description

“Paste Along Entity”

- Menü/Bearbeiten,
- Applikationseinstellungen/Werkzeugeinstellungen,
- QCAD Benutzerreferenz/Bearbeiten,
- Werkzeugleisten/Symbol, Alt text,

“Recent files history size” Applikationseinstellungen/Zuletzt geöffnete Dateien

“Default lineweight for new layers” Applikationseinstellungen/Layer/Layer hinzufügen

“Hide internal blocks” Applikationseinstellungen/Widgets/Blockliste

 1250 TranslationBug ReportLow typo in german version Closed
100%
Task Description

In the scaling dialogue of the german version (and likely other dialogues too) there appears the term ‘Fukuspunkt’. This should probably rather read ‘Fokuspunkt’ or ‘Fußpunkt’. It points at the reference center for the scaling operation.

 1710 TranslationBug ReportLow Lack of translations for close dialog using Ubuntu Closed
100%
Task Description

Using Ubuntu GNOME, there are some untranslatable buttons strings on close file dialog. Screenshot attached.

 1716 TranslationBug ReportLow Wrong plural forms in translations Closed
100%
1 Task Description

I found that words which has plural forms are translated in manner where only two forms are possible - like in English language. For example: “Object” and “Objects”. But other languages (for example Polish) very often have more than 2 plural forms.
There are also strings which use only one form (for example: “Reset label position of %1 dimension(s).”) but cardinal number placed in string point on more forms than one.
All these strings looks bad when translated and sometimes even in English. I mark most of them using comments:

http://translate.qcad.org/pl/qcad/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadpro/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadcam/translate/#search=plural&sfields=notes

I believe problem can be fixed using plural form strings: https://www.gnu.org/software/gettext/manual/html_node/Plural-forms.html

 1753 TranslationBug ReportLow View > Property Editor: entity types in property editor ...Closed
100%
Task Description

Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)

 1988 TranslationBug ReportLow Translation: "Automatisches Speichern" wird mit "Autosa ...Closed
100%
Task Description

QCAD Pro, Deutsche Benutzeroberfläche:

Kommando Zeilen Mitteilung:
[13:35:12] Automatisches Speichern in: C:\Users\......xxx.dxf...
[13:35:12] Autosave abgeschlossen.

Englische und Deutsche Benutzeroberfläche:
Die angezeigten 3 Punkte nach dem xxx.dxf sind überflüssig da die Zeile nach dem dxf definitive endet.

 2094 TranslationBug ReportLow Leader and Datum - Tool tip for "Undo Last Segment" Closed
100%
Task Description

Tools: Leader and Datum
Tool tip for “Undo Last Segment” - Segment instead of Segement

 24 WebsiteFeature RequestLow Website Tasks Closed
100%
Task Description

Open

Homepage

  • announce in forum
  • make developer’s corner, links to
    • RSFrameworkAPI Documentation
    • QCAD 3 Code Snippets ECMAScript (Google Docs)
    • QCAD 3 Developer Notes (Google Docs)
    • QCAD 3 Forum
  • change copyright year (still 2010)

Wikipedia

  • update QCAD site

Flyspray

  • mark version 3 TP1 as current version

Done

Homepage

  • add new forum category
 127 WebsiteFeature RequestLow QCAD scripts development Closed
100%
Task Description

The QCAD scripts, that contain a great deal of functionality in the QCAD framework, are so to say open source, in the limited, still powerful, sense that they can be read, inspected and single-handedly adapted to local needs. Wouldn’t it make sense to store these in a public source code repository?

So to allow closer tracking of development, eg. Of course, all of the scripts would then have to know which release of the /kernel/ they require as a support. But that should be a good thing anyways, as soon as a community of framework users arises, wasn’t it?

 1327 WebsiteBug ReportLow qcad.org vs. ribbonsoft.com Closed
100%
Task Description

In the head of the new task form there is a “search for existing…” link to ribbonsoft.com even though I am browsing flyspray on qcad.org; maybe this can be made a relative link?

 1457 WebsiteBug ReportLow Website FAQ Deutsch Closed
100%
Task Description

Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.

http://www.qcad.org/de/qcad-documentation/faq

Showing tasks 2251 - 2300 of 2303 Page 46 of 47<<First - 43 - 44 - 45 - 46 - 47 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing