|
1373 | QCAD (main) | Feature Request | Low | Line From Angle - additional option to select exisitng ... | Assigned | |
|
Task Description
Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.
|
|
1372 | QCAD (main) | Feature Request | Low | Distance Point to Point - option for 'added' distances | Assigned | |
2 |
Task Description
It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)
|
|
1371 | QCAD (main) | Feature Request | Low | Matrix - Modify, missing Flip Horizonatal and Vertical ... | Assigned | |
|
Task Description
Matrix - Modify, add Flip Horizonatal and Vertical tools
|
|
1368 | QCAD (main) | Suggestion | Low | Context Menu - suggestions | Assigned | |
|
Task Description
I love using the context menu, speeding up my workflow indeed.
I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!
Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?
What do you think?
|
|
1364 | QCAD (main) | Feature Request | Low | New Tool -'Run Parallel with' | Assigned | |
2 |
Task Description
New Tool request:
When drawing a line it would be good to have a tool/option to ‘run parallel with’.
For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!
|
|
1363 | QCAD (main) | Feature Request | Low | New Tool - make lines horizontal or vertical | Assigned | |
|
Task Description
New Tool Request:
To have a tool to make any given line which is ‘not’ orthogonal already into an orthogonal line.
For example if I had a line at 30 degrees by using the tool I could change the line to be either horizontal or vertical.
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
1356 | QCAD (main) | Feature Request | Low | Option to lengthen/Shorten from both ends of entity at ... | Assigned | |
2 |
Task Description
It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.
|
|
1345 | QCAD (main) | Feature Request | Low | Added option to paste a number of entities with even/eq... | Assigned | |
1 |
Task Description
Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209
An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.
|
|
1339 | QCAD (main) | Bug Report | Low | Library Browser unstoppable | Assigned | |
|
Task Description
Hi,
Even with the Application Preference, Library Browser, NO Update on Start up, the Libray Browser scans the directory, a proces that can’t be stopped or closed.
|
|
1337 | QCAD (main) | Feature Request | Low | Alternate units for dimensions | Assigned | |
2 |
Task Description
Add support for alternate units for dimension style, for example to display units in mm and in.
|
|
1332 | QCAD (main) | Feature Request | Low | File > SVG Export: export DXF entity handles to SVG | Assigned | |
|
Task Description
Add handle attribute to exported SVG tags to identify exported DXF entities.
|
|
1323 | QCAD (main) | Suggestion | Low | Improve command line support in QCAD | Assigned | |
|
Task Description
Hi,
As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore), I noticed a severe lack on command line acces in QCAD.
For example I find the icon and pixel selecting methods within qcad very confusing and rude.
With the normal cad Select command I can select exactly what en how I want it.
I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s, tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil. So I use command line Commands, such as Move, Copy, Change, Select, a.s.o. For a ‘Command scripting’ user (-batching is a different tool!-), it seems to me logical these basic commands should be accessable.
|
|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
1298 | QCAD (main) | Feature Request | Low | Drawing Preference; File format | Assigned | |
1 |
Task Description
Hi, I get anoyed everytime saving a drawing;
File Format not recommended....... [Yes] ; I know. it's suppose to be in that format!
Saving to file...... [OK] ; I already told you
Black entities ......bla bla [OK] ; I already told you
Custom colors ...... bla bla [OK] ; I already told you
Therefore, Drawing Preferences should start with the file format choice field;
File Format: R.......
Drawing should be opened and saved in that format without any question. Please.
|
|
1288 | QCAD (main) | Feature Request | Low | Print Preview Scaled Rulers | Assigned | |
1 |
Task Description
Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?
|
|
1287 | QCAD (main) | Feature Request | Low | Information tool shows absolute units in print preview | Assigned | |
1 |
Task Description
With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units. So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.
See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
|
|
1282 | QCAD (main) | Feature Request | Low | Changeable color of the selection bar in layer list. | Assigned | |
1 |
Task Description
Changeable color of the selection bar in the layer list. Now the color of the bar is darkblue and the underlaid icons are black and are not readable.
|
|
1278 | QCAD (main) | Feature Request | Low | Layer list: store layer state independently of parent l... | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3755
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
1 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
1255 | QCAD (main) | Feature Request | Low | Change a quote value modify the drawing + link quotes w... | Assigned | |
|
Task Description
Change a quote value modify the drawing + link quotes with entities
In other words, makes quotes editable AND linked to entities.
|
|
1254 | QCAD (main) | Feature Request | Low | Add drop object along a path with automatic trim | Assigned | |
|
Task Description
Add drop object along a path with automatic trim.
The object can be a selection before or after selecting the tool, an entity or a block.
The path can be another entity from a start point to an end point.
Dropping can be made on one side or the other (like in other tools depending on the side of the cursor), with a choice of miroring the object or not.
The number of drops or the distance between can be selected.
The distance can be between a control point of the object or its sysmetry axis or border.
The dropping direction can be selected too.
The droping depth can be constrained : all control points have passed the path, or one of them. Alternatively, replace control points by an entity belonging to the object.
Exemple of use case : equidistant drills in a curved rail. The dropping depth constraint enables for example to ensure a drill has a minimal depth when not orthogonal to a plan.
|
|
1242 | QCAD (main) | Bug Report | Low | SVG import DPI box should use localized decimal separat... | Assigned | |
1 |
Task Description
I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.
|
|
1233 | QCAD (main) | Feature Request | Low | Tab key to cycle between selected objects | Assigned | |
|
Task Description
I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.
If I remember correctly, Inkscape has this behaviour.
Thanks.
|
|
1230 | QCAD (main) | Feature Request | Low | File > PDF Export / SVG Export: export layers | Assigned | |
|
Task Description
Dear Andrew, just in case you should ever run out of ideas for enhancements; As an advisor I sometimes get PDF files and recently, some CAD drawings contained layers, which is kind of nifty to reduce the clutter.
Sadly though, qprinter/qpainter seem to be unaware of OCG (Optional Content Groups, the PDF jargon for layers) at the moment, so my plea is for the back burner now. Probably in SVG though it can be done? Yet that is of a little less use, maybe…
|
|
1229 | QCAD (main) | Feature Request | Low | Load last project at start | Assigned | |
|
Task Description
When starting QCAD it will open a new, untitled, page causing me to close that, click through the saving option to discard changes and then load up the project i’m working on. It would be nice to have the option for the program to start with the last used project. I checked the application preferences to see if this option was already possible as it’s common with other applications but couldn’t find it. In ‘Startup’ (the obvious place for it) there was only an option for the splash screen.
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1206 | QCAD (main) | Feature Request | Low | Link drawings with each other to update layers, blocks | Assigned | |
3 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410
|
|
1203 | dxflib | Bug Report | Low | Images not saved (dxflib) | Assigned | |
|
Task Description
I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.
The layer contains a point and the image and nothing else.
The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.
With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:
@@ -158699,28 +153057,6 @@ AcDbXrecord
90
6
0
-IMAGEDEF
- 5
-A1
-100
-AcDbRasterImageDef
- 90
-0
- 1
-/critter/HTV10/Ortofoto/ortofoto201502f.png
- 10
-210.0
- 20
-149.0
- 11
-1.0
- 21
-1.0
-280
-1
-281
-0
- 0
ENDSEC
0
EOF
The point in the same layer does not similarly disappear, the bug only seems to affect images.
I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).
I have not been able to correlate the bug with anything.
Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.
(Any chance of getting FreeBSD into the “Operating System” field ?)
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
3 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
1185 | QCAD (main) | Feature Request | Low | Importing Tables (CSV) | Assigned | |
2 |
Task Description
Import tables in CSV format and display them in the drawing as lines and text.
|
|
1172 | QCAD (main) | Feature Request | Low | Print Preview - Add 'Place Paper Option' tool | Assigned | |
1 |
Task Description
Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.
Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!
If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(
|
|
1169 | QCAD (main) | Feature Request | Low | Bitmap clipping | Assigned | |
1 |
Task Description
Clipping bitmaps to only show a part of the image.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263
|
|
1165 | QCAD (main) | Feature Request | Low | New Create Spiral Tool | Assigned | |
4 |
Task Description
A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.
Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236
|
|
1159 | QCAD (main) | Feature Request | Low | Add preference for button option instead of drop down m... | Assigned | |
2 |
Task Description
For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.
|
|
1157 | QCAD (main) | Feature Request | Low | Dimension settings - arrowhead style | Assigned | |
3 |
Task Description
A ‘non -filled’ arrowhead would be good to have also.
|
|
1156 | QCAD (main) | Feature Request | Low | Add preference to force toolbars to be floating | Assigned | |
1 |
Task Description
Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?
|
|
1155 | QCAD (main) | Feature Request | Low | Add preference for solid line crosshairs | Assigned | |
|
Task Description
Would it be possible to have the choice of either dashed or solid lines for the large cross hairs?
|
|
1152 | QCAD (main) | Feature Request | Low | Add preference for snap label and snap cursor shape / c... | Assigned | |
1 |
Task Description
Would it be possible to have options for:
1.Enable or disable Snap label with text.
2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.
* It would be good for users to have the choice.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
2 |
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|
|
1130 | QCAD (main) | Feature Request | Low | Offset Polyline from both sides at once | Assigned | |
|
Task Description
It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.
Maybe a similar feature could be added to the line -parallel tools?
|
|
1128 | QCAD (main) | Feature Request | Low | Text: automatically wrap text at text box width | Assigned | |
2 |
Task Description
Add support for automatic text line wrapping for multiline text entities.
|
|
1126 | QCAD (main) | Feature Request | Low | Suggestion for Dimension Location setting | Assigned | |
3 |
Task Description
Please seet topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
4 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
1111 | QCAD (main) | Feature Request | Low | Option to swap right/middle mouse button | Assigned | |
|
Task Description
Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag. So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad. Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.
So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.
|
|
1107 | QCAD (main) | Feature Request | Low | Splines: add / remove control points of existing spline... | Assigned | |
2 |
Task Description
Tools to add control points to existing splines and remove control points.
|
|
1106 | QCAD (main) | Feature Request | Low | Add support for wipeouts | Assigned | |
3 |
Task Description
Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.
|