QCAD Bugtracker

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

Add support for automatic text line wrapping for multiline text entities.

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

This would be nice.
It will save a lot mouse - keypad changes for me.

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

Modify - Round - Click polyline - round all corners

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

To add a Plot Stamp option for printing, to have options to print file name, date , time etc...

See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967

Input:

1. X axis min/max or choose line (?) or center (for polar functions)
2. function: y = f(x) / polar function: r = f(a)

Output:

1. function plot

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers.

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

The new tool “Paste along entity” is very useful! But I work mostly in mechanical engineering and would like to see more options to determine where it has to start with the first insert item.

Screenshot:

1. That is how it works right now - no chance to get it started on both ends of an line.

2. If I need to have my items also on the ends I have to use additional the normal “Paste” function.

3. If I could tell the “Paste along entity” that there is a start and end “Base” dimension then I’m a big step further.

I could tell the tool that it has to start at “0” or at “25” and the rest is just regarding the calculation. Correct?

However - you need many times in mechanical engineering etc. a hole pattern which will start at:

0,25,25,25,25,25,25,25,25,0

or

25, 123.5, 123.5, 123.5, 123.5, 123.5, 25

It would be very nice to have this also in combination with the “Paste along entity” tool

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

New mode for clip to rectangle: copy contents of rectangular area to clipboard.

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

Make dimension label decimal separator configurable (DIMDSEP).

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks”

Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.

It would be very helpful if the library browser had a delete function.

I know that this can be very risky for some people, but it is the easiest
way to see clearly what you delete.

Regards
Henry

Add support for spline shaped leaders

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

Original request:

https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

Import tables in CSV format and display them in the drawing as lines and text.

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.