QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
1 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
1 Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

2087QCAD (main)Feature RequestLowMore options for "Paste along Entity" [PE]Assigned
0%
1 Task Description

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

2107QCAD (main)Feature RequestVery LowAdd a button to the tool bar to allow for a quick backg...Assigned
0%
1 Task Description

I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2300QCAD (main)Feature RequestLowDuplicate layout blocks with contentsAssigned
0%
1 Task Description

Add a tool to duplicate a layout block with contents.

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
Task Description

implement

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

514QCAD (main)Feature RequestLowPunktpestimmung Intersection manual muss immer wieder n...Assigned
0%
Task Description

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut ;-)

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht :-(

519QCAD (main)Feature RequestLowPress tab to access first control in options tool barAssigned
0%
Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

554QCAD (main)Feature RequestLowAuswahlbox sollte auch mit der Shift Taste Bereiche dem...Assigned
0%
Task Description

Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren.
Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste).
Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.

So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.

564QCAD (main)Feature RequestLowSettings organisation in levelAssigned
0%
Task Description

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly ;-) suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels ;-))) ?

566QCAD (main)Feature RequestLowShortkey for rectangle text rotationAssigned
0%
Task Description

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

586QCAD (main)Feature RequestLowFile open dialog with previewAssigned
0%
Task Description

Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.

588QCAD (main)Feature RequestLowBemaßung Prefix Dropdown mit eigenen Vorgaben erweitern...Assigned
0%
Task Description

Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären.
Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.

Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

601QCAD (main)Feature RequestLowFür Berechnungen neu zu erstellende Elemente Werte von ...Assigned
0%
Task Description

Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.

Beispiel:
Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.

Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.

Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.

Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?

604QCAD (main)Feature RequestLowMeasure and record X,Y coordinates tool - add to info ...Assigned
0%
Task Description

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

614QCAD (main)Feature RequestLowBlocks - overwrite current layer yes/no ...Assigned
0%
Task Description

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature .... ;-)

622QCAD (main)Feature RequestLowDisproportianal scaling of arcs, ellipsesAssigned
0%
Task Description

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.

628QCAD (main)Feature RequestLowImprove workflow for entering tool parametersAssigned
0%
Task Description

Provide keyboard shortcuts for options tool bar.

Under Linux, Windows Alt+Key shortcuts can be used.
Mac OS X does not seem to support this.

See also suggestions at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread

631QCAD (main)Feature RequestLowOption "Scale" für das öffnen von Templates ...Assigned
0%
Task Description

Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.

Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.

Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ... ;-)

637QCAD (main)Feature RequestLowViewports / View ListAssigned
0%
Task Description

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

639QCAD (main)Feature RequestLowAbility to load a file of keyboard shortcutsAssigned
0%
Task Description

It would be useful if a file of keyboard shortcuts to commands could be loaded.

Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.

There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.

This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)

648QCAD (main)Feature RequestLowConfigurable behavior for line patterns at weight 0.00Assigned
0%
Task Description

A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected.
Suspect other linestyles to behave in a similar fashion.

See attached drawing.

Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

703QCAD (main)Feature RequestLowInfo function -> contour for Hatch not closed ...Assigned
0%
Task Description

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is :-(

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ............... ;-)

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

719QCAD (main)Feature RequestLowLibrary Browser additional Function ...Assigned
0%
Task Description

It would be nice to get:

In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences.
Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks ;-)

Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window.
Right now you have to use extern Programs like the Windows explorer to move or delete items.

724QCAD (main)Feature RequestLowUseless reference point entering when moving relativelyAssigned
0%
Task Description

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

747QCAD (main)Feature RequestLowDXF import: dimension labelAssigned
0%
Task Description

Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.

757QCAD (main)Feature RequestLowDim: Architectural tick and Leader Arrow size independe...Assigned
0%
Task Description

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

783QCAD (main)Feature RequestLowSave as .dgn option missing in 3.0.8?Assigned
0%
Task Description

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

787QCAD (main)Feature RequestLowHatch generator - plug in tool?Assigned
0%
Task Description

Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?

I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.

790QCAD (main)Feature RequestLowDimension Setting - Extension Line - total length setti...Assigned
0%
Task Description

It would be nice to have the option for a “Short” Extension Line.
This is often used in Architectural drawings.
Yes, I know that I can explode a dimension and change it to that what I’m asking for - but that is really a Sisyphus task and destructs the function of a dynamic Dimension in QCAD.

Showing tasks 151 - 200 of 333 Page 4 of 7<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing