QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
1863ECMAScriptFeature RequestLowWidgetFactory.saveState: save state of checkable QGroup...Assigned
0%
Task Description

QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf

1870QCAD (main)Feature RequestLow Stretch tool / option to turn selection restriction on...Assigned
0%
Task Description

Hi,

since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.

That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?

It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1878QCAD (main)Feature RequestLowSnap > Distances from 2 Points: snap to point with give...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
Task Description

Implement a multiline tool.

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

2226QCAD (main)Feature RequestVery LowmacOS: support proxy iconAssigned
0%
Task Description

Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.

2227QCAD (main)Feature RequestLowCAM > CAM Export: post processor for tangential knife c...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

2229QCAD (main)Feature RequestLowProperty Editor, option format property values as decim...Assigned
0%
Task Description

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

2272QCAD (main)Feature RequestLowSupport unit "US survey foot"Assigned
0%
Task Description

In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:

There are two issues regarding this with QCAD:

  1. If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
  2. It is not possible to select these units in the GUI.

I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!

Showing tasks 301 - 326 of 326 Page 7 of 7<<First - 3 - 4 - 5 - 6 - 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing