Traducido por Google:
Tienes al menos dos opciones:
1. Cuando inserte un mapa de bits, QCAD le dirá el tamaño real en px ANTES de colocarlo en su Model_Space. QCAD hará coincidir el tamaño de px con la unidad de dibujo real.
Ejemplo: su mapa de bits tiene un tamaño de 450x650 px
Su unidad de dibujo en QCAD es Milímetro.
Si inserta ahora el mapa de bits en su dibujo, la barra de opciones le mostrará el tamaño en px en mm. 1 px = 1 unidad de dibujo = 1 milímetro.
- Husky-2021.01.31-03.png (7.78 KiB) Viewed 14410 times
Si necesita cambiar el tamaño del mapa de bits, puede hacerlo en la barra de opciones
- Husky-2021.01.31-04.png (5.5 KiB) Viewed 14410 times
Luego insértelo en su Model_Space y su mapa de bits ahora tiene el tamaño elegido:
- Husky-2021.01.31-05.png (100.86 KiB) Viewed 14410 times
Imprímelo con una escala de 1: 1, listo.
2.
Si el tamaño del mapa de bits no importa, pero el tamaño del papel, puede insertar cualquier tamaño de mapa de bits en su dibujo, iniciar la herramienta Vista previa de impresión, elegir el tamaño del papel y utilizar la opción "Ajustar el dibujo a la página automáticamente". Luego, QCAD calcula la escala.
Imprímelo con esa escala, listo.
________________________________________________________________________________
You have at least two option:
1. When you insert a bitmap QCAD will tell you the real px size BEFORE it is placed in your Model_Space. QCAD will match the px size with the actuel drawing unit.
Example: Your bitmap has a size of 450x650 px
Your drawing unit in QCAD is Millimeter.
If you insert now the bitmap into your drawing the option bar will show you the size instead in px in mm. 1 px = 1 drawing unit = 1 Millimeter.
- Husky-2021.01.31-03.png (7.78 KiB) Viewed 14410 times
If you need to resize the bitmap you can do that in the option bar
- Husky-2021.01.31-04.png (5.5 KiB) Viewed 14410 times
Then insert it into your Model_Space and your bitmap has now the chosen size:
- Husky-2021.01.31-05.png (100.86 KiB) Viewed 14410 times
Print it with a 1:1 scale - done.
2.
If the bitmap size doesn't matter but the paper size then you can insert any bitmap size into your drawing, launch the Print Preview tool, chose the paper size and use the "Auto fit drawing to page" option. The scale is then calculated by QCAD.
Print it with that scale - done.