Page 2 of 2
Re: Convert Drawing Units
Posted: Sun May 07, 2017 9:14 pm
by Husky
Ups ... something what I haven't discovered before ....
Open new drawing - default unit mm,
Convert Drawing tool - from mm to inch,
Use DIM tools - DIM Scale 1"=1" and for other dims DIM Scale 12 - looks just like expected ....
Save - close - reopen this drawing and all DIMs which are created with a scale factor of 12 are bombastic ...
Before saving:
- Husky-2017.05.07-01.png (16.33 KiB) Viewed 23326 times
Reload ...
- Husky-2017.05.07-02.png (19.84 KiB) Viewed 23326 times
Any chance to fix this?
Edit: Of course I can fix it by myself with the Property Editor (Scale) but that isn't what I meant ....
Re: Convert Drawing Units
Posted: Mon May 08, 2017 3:40 pm
by andrew
This is a rather complex problem connected to what is allowed in DXF and what not and what defaults apply and when. For now, I'm afraid fixing the scale in the property editor is the way to go.
Re: Convert Drawing Units
Posted: Mon May 08, 2017 3:46 pm
by andrew
Re: Convert Drawing Units
Posted: Mon May 08, 2017 8:17 pm
by Husky
Thanks for this info! I don't think many user are bending this tool like me ..... but nevertheless it would be nice to get it fixed one day.
Thanks for the Bug Report!
andrew wrote:For now, I'm afraid fixing the scale in the property editor is the way to go.
For everybody who has to face this problem too: My workaround is to collect and mark all dimension with the QCAD "Selection Filter" and then change the Scale Value in the Property Editor.
- Husky-2017.05.08-01.png (108.55 KiB) Viewed 23307 times
Re: Convert Drawing Units
Posted: Tue May 09, 2017 3:45 am
by Husky
Hmmmmmmmmmmmmm .... maybe I found another limitation.
I'm still talking about the same drawing which is converted from mm to inch. If I try to copy and cut this drawing into a new mm drawing I get a wired result. Depending on the paste / rotation it works or not. 0 and 180 degree are fine - everything else will lead to a bumfuzzled drawing.
Source: Select everything - copy to clipboard:
- Husky-2017.05.08-02.png (19.21 KiB) Viewed 23305 times
Target (new drawing) Paste - rotated 90 degree:
- Husky-2017.05.08-03.png (35.51 KiB) Viewed 23305 times
@Andrew
If you need the drawing I'll send it to your email.
Re: Convert Drawing Units
Posted: Tue May 09, 2017 7:15 am
by andrew
Husky: yes, I would need the drawing file to confirm, thanks.
Re: Convert Drawing Units
Posted: Fri Jun 23, 2017 4:07 pm
by Whicked
@andrew & @riverbuoy
Thank you, both for another great tool. I have no control over the dimensioning of vendor drawings, and this makes the insertion of the drawings into mine nearly painless.
thank you!
Bill J.