Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Nice update! Thank you very much!
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi All
Saving BHT Hatch Patterns to the Local Shared Path on Linux & Windows ,Please Use The Folders Below:-
.
Linux [Running BHT in WINE ]
/home/username/.local/share/QCAD/QCAD/patterns/metric
/home/username/.local/share/QCAD/QCAD/patterns/imperial
.
Windows 10
c:\Users\Username\AppData\Roaming\QCAD\patterns\metric
c:\Users\Username\AppData\Roaming\QCAD\patterns\imperial
.
Note:-
If the [patterns,metric & imperial] Folders Do Not Exist You Will Need to Create Them..
The AppData [Windows] & .local [Linux] are System Hidden Folders But There is a Trick to Bypass This [See Gifs Below]
Once You Have Selected the Folder BHT Will Remember it for the Next Time You Run it and Save.
.
BHT is a Windows 32bit Application That Can Run in Linux using WINE..
.
Windows 10 Example Below.
Now Included with BHT-V3.2-Setup.zip
.
Linux Mint Example Below.
Now Included with BHT-V3.2-Setup.zip
.
I Hope This Helps..
Cheers
John Hyslop
.
Downloads:-
BHT-V2.0 to 2.8 Downloaded 166 Times
BHT-V2.9 Downloaded 19 Times
BHT-V2.9.1.zip Downloaded 152 times
BHT-V3.0.zip Downloaded 5 times
BHT-V3.1.0.zip Downloaded 79 times / 4 compressed with UPX
New Version Uploaded
Saving BHT Hatch Patterns to the Local Shared Path on Linux & Windows ,Please Use The Folders Below:-
.
Linux [Running BHT in WINE ]
/home/username/.local/share/QCAD/QCAD/patterns/metric
/home/username/.local/share/QCAD/QCAD/patterns/imperial
.
Windows 10
c:\Users\Username\AppData\Roaming\QCAD\patterns\metric
c:\Users\Username\AppData\Roaming\QCAD\patterns\imperial
.
Note:-
If the [patterns,metric & imperial] Folders Do Not Exist You Will Need to Create Them..
The AppData [Windows] & .local [Linux] are System Hidden Folders But There is a Trick to Bypass This [See Gifs Below]
Once You Have Selected the Folder BHT Will Remember it for the Next Time You Run it and Save.
.
BHT is a Windows 32bit Application That Can Run in Linux using WINE..
.
Windows 10 Example Below.
Now Included with BHT-V3.2-Setup.zip
.
Linux Mint Example Below.
Now Included with BHT-V3.2-Setup.zip
.
I Hope This Helps..
Cheers
John Hyslop
.
Downloads:-
BHT-V2.0 to 2.8 Downloaded 166 Times
BHT-V2.9 Downloaded 19 Times
BHT-V2.9.1.zip Downloaded 152 times
BHT-V3.0.zip Downloaded 5 times
BHT-V3.1.0.zip Downloaded 79 times / 4 compressed with UPX
New Version Uploaded
Last edited by John Hyslop on Fri Apr 29, 2022 8:31 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi All
.
I just added a new pattern I called it Ziggy because Zigzag already exists in qcad patterns, this new pattern gives you a little more flexibility with options to change X and Y line lengths "the gaps in between the lines are the same distance X & Y..
.
That's a total of 14 user adjustable hatch patterns
.
Other changes are as follows:-
BHT is now compiled into a Setup file.
"Add User Name or Comments Here" now clears when you click on it and whatever the user types in is retained throughout until the application is closed.
Help file is now added to the menu "in RTF format."
A folder is included in the zip file "Additional files" for some light reading and viewing
.
A big thank you to Forum user PeteVick for all the testing, bug picking, general input and comments..
.
Enjoy
Cheers
John Hyslop
.
.
Below is a fix for 32bit systems not being able to open the help file, it does nothing else.
You must already have BHT v3.2, or later, installed. If you don't, download and install BHT-V3.2-Setup.zip above
.
New Version Uploaded Here are some samples using the new pattern..
.
.
I just added a new pattern I called it Ziggy because Zigzag already exists in qcad patterns, this new pattern gives you a little more flexibility with options to change X and Y line lengths "the gaps in between the lines are the same distance X & Y..
.
That's a total of 14 user adjustable hatch patterns
.
Other changes are as follows:-
BHT is now compiled into a Setup file.
"Add User Name or Comments Here" now clears when you click on it and whatever the user types in is retained throughout until the application is closed.
Help file is now added to the menu "in RTF format."
A folder is included in the zip file "Additional files" for some light reading and viewing
.
A big thank you to Forum user PeteVick for all the testing, bug picking, general input and comments..
.
Enjoy
Cheers
John Hyslop
.
.
Below is a fix for 32bit systems not being able to open the help file, it does nothing else.
You must already have BHT v3.2, or later, installed. If you don't, download and install BHT-V3.2-Setup.zip above
.
New Version Uploaded Here are some samples using the new pattern..
.
Last edited by John Hyslop on Tue May 24, 2022 8:32 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
For those having trouble displaying the BHT help file
I created the above patch.. if you're not having trouble
don't bother downloading the patch..
If you're feeling the urge to download something go here..
https://qcad.org/rsforum/viewtopic.php?f=30&t=9295
You'll have hours of fun creating your own qcad themes
Cheers
John Hyslop
I created the above patch.. if you're not having trouble
don't bother downloading the patch..
If you're feeling the urge to download something go here..
https://qcad.org/rsforum/viewtopic.php?f=30&t=9295
You'll have hours of fun creating your own qcad themes
Cheers
John Hyslop
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi John,
Just played a bit with your hatch tool. very nice work indeed.
Just a comment: the name given to the pattern is case sensitive, ie. 'name.pat' and 'NAME.PAT' don't end up in the same order in the pattern list. I believe that this is likely a QCAD feature.
Just played a bit with your hatch tool. very nice work indeed.
Just a comment: the name given to the pattern is case sensitive, ie. 'name.pat' and 'NAME.PAT' don't end up in the same order in the pattern list. I believe that this is likely a QCAD feature.
JJ Win7 pro-64
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi JJ
If you create in lower case the patterns will end up at the bottom of the list, if you create in upper case they will display in order along with the Qcad ones.. It's a way of separating your patterns from Qcads.. I could of made it upper-case only but as said it's your choice, I might look at adding a tick box is that worth doing or are you happy to type in upper case
Let me know your thoughts and if anyone has pattern ideas for future releases I'm happy to look at that too..
Cheers
John Hyslop
PS I'll make a note about this in the help file in next release.
If you create in lower case the patterns will end up at the bottom of the list, if you create in upper case they will display in order along with the Qcad ones.. It's a way of separating your patterns from Qcads.. I could of made it upper-case only but as said it's your choice, I might look at adding a tick box is that worth doing or are you happy to type in upper case
Let me know your thoughts and if anyone has pattern ideas for future releases I'm happy to look at that too..
Cheers
John Hyslop
PS I'll make a note about this in the help file in next release.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi John,
No problem, I was just puzzled the first time, I could not locate my test pattern, until I scrolled down to the bottom of the QCAD list. Don't bother changing, as you said, that is a good method to keep them separate.
No problem, I was just puzzled the first time, I could not locate my test pattern, until I scrolled down to the bottom of the QCAD list. Don't bother changing, as you said, that is a good method to keep them separate.
JJ Win7 pro-64
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Downloads:-
BHT-V2.0 to 2.8 Downloaded 166 Times
BHT-V2.9 Downloaded 19 Times
BHT-V2.9.1.zip Downloaded 152 times
BHT-V3.0.zip Downloaded 5 times
BHT-V3.1.0.zip Downloaded 79 times / 4 compressed with UPX
BHT-V3.2-Setup.zip Downloaded 34 times
BHT-3.2.1-Patch.zip Downloaded 6 times
BHT-3.2.2.zip Downloaded 31 times
.
Hi All
.
A big thank you to Forum user PeteVick for all his suggestions and testing on this release..
.
Enjoy
Cheers
John Hyslop
NEW Version 3.4.0 UPLOADED BELOW
BHT-V2.0 to 2.8 Downloaded 166 Times
BHT-V2.9 Downloaded 19 Times
BHT-V2.9.1.zip Downloaded 152 times
BHT-V3.0.zip Downloaded 5 times
BHT-V3.1.0.zip Downloaded 79 times / 4 compressed with UPX
BHT-V3.2-Setup.zip Downloaded 34 times
BHT-3.2.1-Patch.zip Downloaded 6 times
BHT-3.2.2.zip Downloaded 31 times
.
Hi All
.
A big thank you to Forum user PeteVick for all his suggestions and testing on this release..
.
Enjoy
Cheers
John Hyslop
NEW Version 3.4.0 UPLOADED BELOW
Last edited by John Hyslop on Sat Oct 22, 2022 8:38 am, edited 5 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi All
This New Version Has a Pattern Called TEETH
It Works on All Versions of Windows 7,10 & 11 32/64bit, it's a 32bit Application & Also Runs on Linux if you have WINE or PlayOnLinux installed...
The Help menu now displays as a pdf file that has information on the program plus an image UI layout with explanations.
.
BHT-V3.3.0-Setup.zip was Downloaded 120 Times
.
NEW VERSION UPLOADED
.
Enjoy
Cheers
John Hyslop
This New Version Has a Pattern Called TEETH
It Works on All Versions of Windows 7,10 & 11 32/64bit, it's a 32bit Application & Also Runs on Linux if you have WINE or PlayOnLinux installed...
The Help menu now displays as a pdf file that has information on the program plus an image UI layout with explanations.
.
BHT-V3.3.0-Setup.zip was Downloaded 120 Times
.
NEW VERSION UPLOADED
.
Enjoy
Cheers
John Hyslop
Last edited by John Hyslop on Sat Oct 22, 2022 9:36 am, edited 3 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi All
I've had a request for a printable version of the Help file..
BHT_Help.pdf has been removed, it was Downloaded 86 times.
This has now been added as the default format in Version BHT-V3.4.0
Cheers
John Hyslop
I've had a request for a printable version of the Help file..
BHT_Help.pdf has been removed, it was Downloaded 86 times.
This has now been added as the default format in Version BHT-V3.4.0
Cheers
John Hyslop
Last edited by John Hyslop on Sat Oct 22, 2022 8:42 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Hi All
IMPORTANT!! UNINSTALL ALL PREVIOUS VERSIONS INCLUDING ANY PATCHES IF APPLIED !!
This Version Has a New Pattern Called POINTS
It Works on All Versions of Windows 7,10 & 11 32/64bit, it's a 32bit Application & Also Runs on Linux if you have WINE or PlayOnLinux installed...
.
BHT-V2.0 to V3.3.0 Were Downloaded 612 Times
.
NEW VERSION ADDED LOOK ON NEXT PAGE .
.
Enjoy
Cheers
John Hyslop
IMPORTANT!! UNINSTALL ALL PREVIOUS VERSIONS INCLUDING ANY PATCHES IF APPLIED !!
This Version Has a New Pattern Called POINTS
It Works on All Versions of Windows 7,10 & 11 32/64bit, it's a 32bit Application & Also Runs on Linux if you have WINE or PlayOnLinux installed...
.
BHT-V2.0 to V3.3.0 Were Downloaded 612 Times
.
NEW VERSION ADDED LOOK ON NEXT PAGE .
.
Enjoy
Cheers
John Hyslop
Last edited by John Hyslop on Thu Dec 08, 2022 8:14 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
- ryancousins
- Premier Member
- Posts: 367
- Joined: Thu Mar 19, 2020 3:47 am
- Location: Michigan, USA
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Really cool program!
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Thanks
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
You might ask yourself "What's the POINT of POINTS" ?
Well thanks to Husky who showed me an Example of what it could be used for when applied and exploded..
So you see it can be useful for " Rectangular Arrays / Offset Arrays & Shifted Arrays.." as well as just hatch patterns
. Cheers
John
Well thanks to Husky who showed me an Example of what it could be used for when applied and exploded..
So you see it can be useful for " Rectangular Arrays / Offset Arrays & Shifted Arrays.." as well as just hatch patterns
. Cheers
John
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: Free Stand Alone Basic Hatch Pattern Tool *Full Version*
Sounds like you have a point ...
Your BHT is great! Thank you for offering it for free to the CAD community.
Your BHT is great! Thank you for offering it for free to the CAD community.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."