Default linewidth

Use this forum to ask questions about how to do things in QCAD.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
Nicke
Registered Member
Posts: 2
Joined: Tue Mar 06, 2018 6:52 am

Default linewidth

Post by Nicke » Tue Mar 06, 2018 7:21 am

How do I set the default linewidth ?
Now when I put a couple of objekts on the screen, for ex 2 parallell lines 0.5 mm apart they melt together, so now
every five minute I have to "select all" and chose the linewidth up in the right corner and set it to 0.05 mm, then it
locks OK on the screen, but the next line is big and fat again.
Please don´t tell me it´s a RTFM-problem, I have searched the manual the best I can.
Thanks in advance from someone not new to CAD, but new to QCAD.

User avatar
andrew
Site Admin
Posts: 9019
Joined: Fri Mar 30, 2007 6:07 am

Re: Default linewidth

Post by andrew » Tue Mar 06, 2018 9:52 am

Please read through this post first, then post back if you have any follow-up questions:
viewtopic.php?f=47&t=3202

Nicke
Registered Member
Posts: 2
Joined: Tue Mar 06, 2018 6:52 am

Re: Default linewidth

Post by Nicke » Tue Mar 06, 2018 3:35 pm

Thank You !
Now I got that working.

Post Reply

Return to “QCAD 'How Do I' Questions”