I'm using quad pro v3.21.3 for mac trying to get lines to plot to the length I specify. I tried a vertical line, added the length of 30'-9". When I measure or dimension the line they read 29'-3"
Drawing units and paper units are both set to inch
dimensions are set to architectural precision 0'-0 1/4"
I need to use the architectural dimensions for a drawing to be used for building permits so I haven't done a drawing yet as I need it to be correct first.
Any lines drawn do the same except 2 point that get dragged to the wanted length.Lines not plotting to correct length
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Lines not plotting to correct length
QCAD allows you to enter mathematical expressions wherever numerical values can be entered (here the length field).
Unfortunately, this means that you cannot enter feet and inches as 30'-9" as this is interpreted as 30' minus 9" (= 29'3"). Instead, you can enter 30'9" (or 30'+9").
Unfortunately, this means that you cannot enter feet and inches as 30'-9" as this is interpreted as 30' minus 9" (= 29'3"). Instead, you can enter 30'9" (or 30'+9").
Re: Lines not plotting to correct length
Thanks, that works. I was just following what was displayed.