Scales

If you are having problems with QCAD 2.1/2.2, post here. Please report bugs here.

Moderator: andrew

Locked
luisjove
Registered Member
Posts: 2
Joined: Thu Mar 17, 2011 7:37 pm

Scales

Post by luisjove » Thu Mar 17, 2011 7:49 pm

Hello,
I have problems with editing function SCALES. The manual that I own is old and is not an option:

Factor X:
Factor Y:

I guess serves to scale with a factor, the X axis, and another factor (or the same) the Y axis.
I tried to enter two values ​​to test, Factor X = 2, Factor Y = 1, and does not work.

Is it that I am using this function wrong?

Thanks and regards,
Luis Jove.

User avatar
andrew
Site Admin
Posts: 9019
Joined: Fri Mar 30, 2007 6:07 am

Post by andrew » Thu Mar 17, 2011 7:52 pm

Please note that non-proportional scaling only works for line entities at this point. Arcs and circles are not converted to ellipse arcs and ellipses, text cannot be 'squeezed' together, etc.

luisjove
Registered Member
Posts: 2
Joined: Thu Mar 17, 2011 7:37 pm

Post by luisjove » Thu Mar 17, 2011 8:57 pm

Andrew,
I understand.

Greetings and thank you very much,
Luis.

Understood

Locked

Return to “QCAD 2.1/2.2 Troubleshooting and Problems”