Introduction/question

Post to this forum to introduce yourself to this forum if you are new here. You might want to include some information about the work you are doing or planning to do with QCAD.

Moderator: andrew

Post Reply
mbcarpenter
Newbie Member
Posts: 7
Joined: Thu Jan 26, 2023 4:07 pm

Introduction/question

Post by mbcarpenter » Thu Jan 26, 2023 4:25 pm

Good morning I’m home builder and cabinetmaker.I’m planning purchasing Qcad. I find that we need a 2d cad program more and more. With that said I have very little experience using a cad program but Hope I can learn. I do have CNC router and have been using Vcrave for about ten years. That kinda some sup my cad experience. What I’m needing this for is floor plans and shop drawings. I hope this the right place to ask this question. Can you print full size drawings on paper like 24”x36” if I email the drawings to my local print maker. If I’m asking in the wrong place I apologize.
Thanks
Mike from South Carolina

CVH
Premier Member
Posts: 3364
Joined: Wed Sep 27, 2017 4:17 pm

Re: Introduction/question

Post by CVH » Thu Jan 26, 2023 4:30 pm

mbcarpenter wrote:
Thu Jan 26, 2023 4:25 pm
Can you print full size drawings on paper like 24”x36” if I email the drawings to my local print maker.
Hi and welcome to the forum.
The answers are yes and yes.
QCAD supports many standard paper sizes plus custom sizes and one can export that as pdf for example.

Regards,
CVH

mbcarpenter
Newbie Member
Posts: 7
Joined: Thu Jan 26, 2023 4:07 pm

Re: Introduction/question

Post by mbcarpenter » Thu Jan 26, 2023 5:14 pm

Thanks so much
Mike

Post Reply

Return to “Introduce Yourself”