Minor bug (cam 3.17)

Discussions around the CAM Add-On of QCAD.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Indicate the post processor used.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
jvalencia
Full Member
Posts: 51
Joined: Mon Jun 29, 2015 8:26 pm

Minor bug (cam 3.17)

Post by jvalencia » Sun May 21, 2017 2:27 pm

Toolpath dialog won't remember Lead In Type when Side/Direction set to "On".

It works as expected when Side is Outside or Inside.
Untitled.png
Untitled.png (41.74 KiB) Viewed 6036 times

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Minor bug (cam 3.17)

Post by andrew » Mon May 22, 2017 8:09 am

Thanks for your report.

Lead in / out are actually not supported if the toolpath is generated on the profile. For this reason, lead in / out are reset to None when side is changed to On.

I can probably provide more information if you can ellaborate on what you are trying to achieve with this setting.

jvalencia
Full Member
Posts: 51
Joined: Mon Jun 29, 2015 8:26 pm

Re: Minor bug (cam 3.17)

Post by jvalencia » Mon May 22, 2017 5:25 pm

I was just trying things. If it's not supported, is it a bug that qcad added the path??

Post Reply

Return to “QCAD/CAM”