I wanted my machine to cut the number 8 in wood. So I created the number 8 using QCAD/CAM, exploded the 8, configured and exported my cutting path using QCAD/CAM.
When I opened my .nc file using CNCLinux, it gave me a strange error:
on line 23 of my .nc file.The move just after exiting cutter compensation mode must be straight, not an arc
Line 23, as generated by QCAD/CAM, is like so:
Code: Select all
N230 G40 X1.625 Y2.1806
Code: Select all
N230 G40 G1 X1.625 Y2.1806
Thank you,
JSRoy